Radiative heat transfer analysis in pure water heater used for semiconductor processing

A simplified one-dimensional model is presented to analyze the non-gray radiative transfer in pure water heater used in the rinsing processes within semiconductor production lines, and the ray-tracing method is extended to simulate the radiative heat transfer. To examine the accuracy of the simplified model, the distribution of radiation absorption is determined by the ray-tracing method based the simplified model and compared with the data obtained by three-dimensional non-gray model in combination with Monte Carlo method in reference, and the effects of the water thickness on the radiation absorption are analyzed. The results show that the simplified model has a good accuracy in solving the radiation absorption in the pure water heater. The radiation absorption increases with the water thickness, but when the water thickness is greater than , the radiation absorption increases very slowly with the water thickness.     

Thermal splitting of Bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) into two Cu(II) porphyrins

When heated, bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) is quantitatively split into two Cu(II) porphyrins both in solution and film states, which is accompanied by large absorption spectral changes.     

Effect of moisture on impact toughness of sugar-coated tablets manufactured by the dusting method

The purpose of this study was to clarify the effect of moisture on the impact toughness of sugar-coated tablets manufactured by the dusting method. We demonstrated that moisture plays an important role in the impact toughness of sugar-coated tablets. Moisturizing the sugar-coating layer resulted in enhancement of impact toughness of sugar-coated tablets, while reducing moisture in the sugar-coating layer resulted in weakening of the impact toughness. This was due to the characteristics of sucrose, the main ingredient of the sugar-coating layer, which is a soft and non-fragile material at high moisture levels, but hard and fragile at low moisture levels. We also demonstrated that friability as an indicator of impact toughness changed with time, and friability should be measured at 14 d after manufacture. This is due to moisture movement from outer sugar-coating layer into the inner sugar-coated tablets. Incorporating microcrystalline cellulose (MCC) in the subcoating layer resulted in sugar-coating layers with high resistance against impact even though moisture content of sugar-coated tablets was low. We confirmed the high impact toughness of the sugar-coated tablets with MCC whose moisture content was low from the results of both free fall and friability tests. We suggest that the dusting method using dusting powder containing MCC is a useful method for the production of sugar-coated tablets containing moisture sensitive drugs.     

An HPLC assay of hydroxyl radicals by the hydroxylation reaction of terephthalic acid

An HPLC assay for hydroxyl radicals is described. The hydroxyl radical was trapped by terephthalic acid (non-fluorescent), and 2-hydroxyl terephthalic acid (fluorescent) was quantitated by HPLC-fluorescence detection. At a terephthalic acid concentration of 4.25 mmol/L, the hydroxyl radical formed in the Fenton reaction was successfully assayed in the concentration range of hydrogen peroxide of 2.5-50 micro mol/L, where the concentration of Fe(II) was 50 micro mol/L. The fluorescence of 2-hydroxy terephthalate was stable at 24 h, and its detection limit by this method was 5 nmol/L (100 fmol).     

Discovery of temperature-dependent phenomena of muon-catalyzed fusion in solid deuterium and tritium mixtures

A systematic experimental study on muon-catalyzed fusion was conducted using a series of solid deuterium and tritium mixtures. A variety of conditions were investigated, i.e., tritium concentrations from 20% to 70%, and temperatures from 5 to 16 K. With decreasing temperature, we observed an unexpected decrease in the muon cycling rate (lambda(c)) and an increase in the muon loss probability (W). The origins of these observed changes were interpreted by the temperature-dependence in the dt mu formation process for lambda(c) and that in the muon reactivation process after muon-to-alpha sticking for W.     

Reliability of mean transit time obtained using perfusion-weighted MR imaging; comparison with positron emission tomography

The purpose of this project was to assess the reliability of the cerebral mean transit time (MTT) obtained using perfusion-weighted MR imaging by comparing it with the MTT obtained when performing positron emission tomography (PET). Ten patients with chronic occlusive cerebrovascular disease were investigated. They had either unilateral internal carotid artery occlusion or middle cerebral artery occlusion. The regions-of-interest were placed in non-infarcted areas within the territory of the middle cerebral artery on the affected side. Control regions-of-interest were placed in mirrored regions of the contralateral side. Linear regression analyses were performed using the parameters of the MTT obtained with perfusion-weighted MR imaging and the MTT, cerebral blood flow, vascular reactivity, and oxygen extraction fraction obtained with PET. The respective MTTs of the affected and non-affected sides obtained with perfusion-weighted MR imaging versus those with PET were 7.3 +/- 2.2 s and 6.0 +/- 1.2 s versus 8.2 +/- 3.0 s and 6.4 +/- 1.7 s. The MTT obtained using perfusion-weighted MR imaging and PET demonstrated statistically significant correlation (r = 0.87, p < 0.0001). The MTT obtained with perfusion-weighted MR imaging correlated statistically with cerebral blood flow (r = -0.74, p < 0.001), vascular reactivity (r = -0.73, p < 0.001) and oxygen extraction fraction (r = 0.61, p < 0.01). Similarly, the MTT obtained using PET statistically correlated with cerebral blood flow (r = -0.78, p < 0.0001), vascular reactivity (r = -0.51, p < 0.05) and oxygen extraction fraction (r = 0.68, p < 0.01). The reliability of the MTT obtained using perfusion-weighted MR imaging appears to be approximately equal to that obtained with positron emission tomography.     

Intramolecular cyclization with nitrenium ions generated by treatment of N-acylaminophthalimides with hypervalent iodine compounds: formation of lactams and spiro-fused lactams

N-Phthalimido-N-acylnitrenium ions are generated from N-acylaminophthalimides, a new class of precursors, by treatment with hypervalent iodine compounds (PIFA and HTIB). In HFIP, the nitrenium ions undergo intramolecular electrophilic substitution reactions to afford N-aminonitrogen heterocycles in high yields. In TFEA, spirodienones bearing the 1-azaspiro[4.5]decane skeleton are obtained by treatment of N-phthalimido-3-(4-halogenophenyl)propanamides with HTIB as a result of ipso attack of the intermediate nitrenium ion. Similarly, using PIFA in TFEA, ipso cyclization of unactivated benzenoid compounds occurs to afford spirodiene derivatives. This involves loss of aromaticity despite the absence of other activating substituents on the phenyl group.     

Distributivity and stationary reflections

In this paper, we present some relations between generalized distributivity of quotient algebras and Mahlo operations, and show that the distributivity implies some variants of stationary relections.