Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.     

Poly‐ε‐Lysine Modified Nanocarbon Film Electrodes for LPS Detection

We developed an electrochemical system for detecting lipopolysaccharide (LPS) that uses an ultraflat nanocarbon film electrode modified with poly‐ε‐lysine with a high affinity to LPS. LPS was captured on the modified electrode, and then ferrocene labeled polymyxin B (FcPMB) was captured on the LPS adsorbed electrode via the LPS‐PMB affinity interaction. The adsorbed FcPMB provided an amplified response with Fe²⁺ ions, and the current response was dependent on the amount of captured LPS (LOD=2.0 ng/mL). This was due to the efficient accumulation of the obtained current for LPS and the very low noise made possible by the ultraflat surface.     

Direct Asymmetric Mannich‐Type Reaction of α‐Isocyanoacetates with Ketimines using Cinchona Alkaloid/Copper(II) Catalysts

The enantioselective direct Mannich‐type reaction of ketimines with α‐isocyanoacetates has been developed. Excellent yields and enantioselectivity were observed for the reaction of various ketimines and α‐isocyanoacetates using cinchona alkaloid/Cu(OTf)₂ and a base. Both enantiomers of the products could be obtained by using pseudoenantiomeric chiral catalysts. This process offers an efficient route for the synthesis of α,β‐diamino acids.     

A new application of statistical moment theory to evaluate the swelling behavior of thermo-responsive gels

The loosely cross-linked poly(acryloyl-L -proline methyl ester) gel, which is known as one of the typical thermo-responsive gels, shows a volume transition around approximately 14°C in pure water. This volume transition is shifted to higher temperature by treatment in aqueous sodium dodecyl sulfate (SDS). The analysis of the swelling-temperature curve (frequency distribution) was performed according to a moment analysis, in which the area under the swelling-temperature curve (AUC), mean swelling transition temperature (MSTT) and variance of swelling transition temperature (VSTT) were calculated. It is shown that the apparent volume transition temperature can be estimated from MSTT and that VSTT can be used to characterize the shape of the corresponding curves.     

Triallylstannyllithium-allyllithium as an initiator for the anionic reversible chain transfer polymerization of 1,3-butadiene

The anionic polymerization of 1,3-butadiene using a novel metalloidal anion initiator, triallylstannyllithium (TALi)-allyllithium (ALi), was studied. The TALi-ALi initiated anionic polymerization of 1,3-butadiene gave the star polymer along with the linear polybutadiene (PBD). The star polymer consisted of three PBD branches and a central tin atom. What is striking is a fact that the number-average molecular weights (M_n) and molecular weight distribution of three PBD branches and linear PBD were almost identical. A reversible chain transfer polymerization mechanism, which includes the equilibrium between tri(macroallyl)-stannyllithium and macroallylic anion, is proposed. © 1996 John Wiley & Sons, Inc.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

Simultaneous detection of ammonia and humidity using transmission surface plasmon resonance technique

Abstract

Gas sensing by using the transmission surface plasmon resonance (T-SPR) technique was demonstrated. Polyacrylic acid (PAA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor A) responded to ammonia; however, it exhibited a strong humidity dependence. Polyvinyl alcohol (PVA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor B) as the sensing material was also prepared and it mainly responded to humidity. The T-SPR properties of Sensors A and B were observed simultaneously by a stacking arrangement that enabled us to obtain the responses by using a single spectrophotometer. The ammonia concentration under various humidity conditions could be accurately obtained by simultaneous measurement of Sensors A and B.     

Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.     

Corrigendum to “Constraints on operator ordering from third quantization” [Ann. Phys. 365 (2016) 54–65]

In our previous paper Ohkuwa et al. (2016) corrigendum was found in Eqs. (3.4) and (3.6). However, conclusions of our previous paper are not changed.