Conjugated polymers containing electron‐transporting,hole‐transporting,and light‐emitting units in the polymer main chain

Conjugated polymers containing electron‐transporting, hole‐transporting, and blue light‐emitting units were synthesized by Suzuki polycondensation. These copolymers exhibited excellent thermal and optical stability. Optical investigation indicated that the incorporation of the spirobifluorene units in the polymer main chain could markedly increase the effective conjugation length of polymers. Electrochemical studies showed that the incorporation of spirobifluorene unit could raise the electrochemical stability and improve the electron‐ and hole‐injecting abilities. The electroluminescent results also showed that the introducing of spirobifluorene units could significantly improve the device performance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1349–1356, 2008     

Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its application as a potentiometric sensor of iodide ion

Construction of a highly stable covalently attached multilayer film electrode containing cobalt phthalocyanine was achieved by UV irradiation of ionic self-assembled multilayer films of diazo-resins (DAR) and cobalt phthalocyanine tetrasulfonic acid (CoTsPc) tetrasodium salt. The modified electrode had good potentiometric response to iodide ion. The potentiometric response was independent of the pH of the solution between pH 2.5 and 6.0, while it was dependent on the nature of the buffer media. The modified electrode had a linear dynamic range between 4.7×10⁻⁶ M and 0.1 M with a Nernstian slope of 58.8 mV per decade and a detection limit of 3.5×10⁻⁶ M in acetate buffer (0.1 M, pH 4.6). The modified electrode also exhibited a fast response, good stability and repeatability.     

Amine-terminated organosilica nanosphere functionalized prussian blue for the electrochemical detection of glucose

A new glucose biosensor had been developed by immobilizing positively charged gold nanoparticles (PGNs) on organosilica nanosphere functionalized prussian blue (OSiFPB)-modified gold electrode. The OSiFPB compound could not only effectively prevent the leakage of the PB mediator during measurements, but also easily form stable film on the electrode surface with efficient redox-activity and excellent conductivity. Furthermore, with the negatively charged surface of OSiFPB, this film could be used as an interface to adsorb the PGNs, which provided a congenial microenvironment for adsorbing biomolecules and decreased the electron-transfer impedance. So, with glucose oxidase as a model biomolecular, the proposed sensor showed rapid and highly sensitive amperometric response to glucose and this immobilization approach effectively improved the stability of the electron-transfer mediator. This work would be promising for construction of biosensor and bioelectronic devices.     

Direct electrocatalytic reduction of hydrogen peroxide at a glassy carbon electrode modified with polypyrrole nanowires and platinum hollow nanospheres

A nonenzymatic sensor for hydrogen peroxide has been fabricated by dispersing platinum hollow nanospheres onto polypyrrole (PPy) nanowires to form a PPy-Pt hollow sphere nanocomposite on a glassy carbon electrode. The materials were characterized by transmission electron microscopy and scanning electron microscopy. The process and the sensor were characterized by electrochemical impedance spectroscopy, cyclic voltammetry, and chrono-amperometry and revealed that the electrode has a large electroactive surface area and small resistance to electron transfer. The linear range for the determination of hydrogen peroxide is from 3.5 µM to 9.9 mM, the detection limit is 1.2 µM (S/N?=?3), and the response time is 3 s. The electrode exhibited good stability and excellent repeatability.     

A novel immunosensor for carcinoembryonic antigen based on poly(diallyldimethylammonium chloride) protected prussian blue nanoparticles and double-layer nanometer-sized gold particles

A highly sensitive amperometric immunosensor has been developed for the detection of carcinoembryonic antigen (CEA). It is based on (a) Prussian Blue nanoparticles coated with poly(diallyldimethylammonium chloride) (P-PB) and (b) double-layer gold nanocrystals. The sensor was obtained by first electrodepositing porous gold nanocrystals on the glassy carbon electrode (GCE), and then by modifying the electrode with the coated P-PB. Subsequently, colloidal gold nanoparticles (nano-Au) were adsorbed onto the GCE by electrostatic interactions between the negatively charged nano-Au and the positively charged P-PB to immobilize CEA antibodies. Finally, bovine serum albumin was employed to block possible remaining active sites and to prevent the non-specific adsorption on the nano-Au. This immunosensor was characterized by cyclic voltammetry and scanning electron microscopy. The working range was adjusted to two concentration ranges, viz. from 0.5 to 10 ng.mL^?1, and from 10 to 120 ng.mL^?1 of CEA, with a detection limit of 0.2 ng.mL^?1 at three times the background noise.     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Macroporous Co3O4 platelets with excellent rate capability as anodes for lithium ion batteries

This paper reports the microwave-assisted synthesis of Co₃O₄ nanomaterials with different morphologies including nanoparticles, rod-like nanoclusters and macroporous platelets. The new macroporous platelet-like Co₃O₄ morphology was found to be the best suitable for reversible lithium storage properties. It displayed superior cycling performances than nanoparticles and rod-like nanoclusters. More interestingly, excellent high rate capabilities (811 mAh g^?1 at 1780 mA g^?1 and 746 mAh g^?1 at 4450 mA g^?1) were observed for macroporous Co₃O₄ platelet. The good electrochemical performance could be attributed to the unique macroporous platelet structure of Co₃O₄ materials.     

大学物理演示实验室开放教学初探

开放式演示实验可以改变传统教学模式的弊端,充分发挥学生在教学中的主体和自主地位.从深化教学改革角度来看,应针对不同类型的学生开放不同的实验内容,密切联系工程生产生活实际,充分利用多媒体教学,培养学生创新实践能力.从利用教学条件的角度来看,要建立多项制度,细化演示实验室开放,努力实现可持续发展.     

Scintillation reduction using multi-beam propagating technique in atmospheric WOCDMA system

We propose employing multi-beam propagating technology to mitigate the influence of atmospheric scintillation to the wireless optical code division multiple access (WOCDMA) system and then deduce the bit error rate (BER) formulas of systems in weak and strong scintillations,respectively.According to simulation experiment results,multi-beam propagation can improve the system performance very well compared with single-beam propagating technique.Moreover,the more beams we use,the better the performance we get.When the received optical power is-30 dBm,the BER of the system employing four beams is 5 and 1 dB lower than that of using single-beam propagating technique in weak and strong scintillations,respectively.