NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

Recasting wave functions into valence bond structures: A simple projection method to describe excited states

A method is proposed to obtain coefficients and weights of valence bond (VB) determinants from multi configurational wave functions. This reading of the wave functions can apply to ground states as well as excited states. The method is based on projection operators. Both energetic and overlap‐based criteria are used to assess the quality of the resulting VB wave function. The approach gives a simple access to a VB rewriting for low‐lying states, and it is applied to the allyl cation, to the allyl radical and to the ethene (notably to the V‐state). For these states, large overlap between VB and multi reference wave functions are easily obtained. The approach proves to be useful to propose an interpretation of the nature of the V‐state of ethene. © 2015 Wiley Periodicals, Inc.     

Self-assembly of fullerene-rich nanostructures with a stannoxane core

Fullerene derivatives bearing a carboxylic acid function undergo self-assembly with n-butylstannonic acid (nBuSn(O)OH) to produce fullerene-rich nanostructures with a stannoxane core in almost quantitative yields.     

Preparation of superhydrophobic silicon oxide nanowire surfaces

The paper reports on the preparation of superhydrophobic amorphous silicon oxide nanowires (a-SiONWs) on silicon substrates with a contact angle greater than 150 degrees by means of surface roughness and self-assembly. Nanowires with an average mean diameter in the range 20-150 nm and 15-20 microm in length were obtained by the so-called solid-liquid-solid (SLS) technique. The porous nature and the high roughness of the resulting surfaces were confirmed by AFM imaging. The superhydrophobicity resulted from the combined effects of surface roughness and chemical modification with fluorodecyl trichlorosilane.     

Amphiphilic and mesomorphic fullerene-based dendrimers

Growing attention is currently devoted to large dendritic structures for applications in nanotechnology and materials science. In this respect, the incorporation of such compounds into thin ordered films appears to be an important issue. One of the most widely pursued approaches to structurally ordered dendrimer assemblies has been the preparation of Langmuir films at the air-water interface. We report on the case of a diblock globular fullerene-based dendrimer and show that peripheral substitution of the dendrimer with hydrophobic chains on one hemisphere and hydrophilic groups on the other provides the required hydrophobic/hydrophilic balance allowing the formation of stable Langmuir films. A second approach has been to consider the case of fullerene containing dendrimers terminated by mesogenic groups such as cyanobiphenyl subunits. Whatever the generation is, up to the fourth one, all these compounds exhibit a well-defined liquid crystalline smectic A phase. The molecular organisation within the smectic layers is found to be monolayered or bilayered depending on the generation. For the smallest dendrimers, the organisation is mainly governed by the size of the fullerene moiety, whereas for the higher ones, it is governed by the interactions between the terminal mesogenic groups. These two approaches appear particularly interesting for functional groups such as fullerenes, which are not well adapted to be organised in nanoscale architectures. The present study shows that fullerenes can indeed be introduced into different types of ordered structure when they have been chemically adequately modified.     

Functionalization and Rearrangement of Spirocyclohexadienyl Oxindoles: Experimental and Theoretical Investigations

The preparation and functionalization of spirocyclohexa‐2,5‐diene oxindoles is described. The spirocyclic core of the title compounds was installed by using a SmI₂‐mediated cyclization of aryl iodobenzamides. Epoxidation with CF₃CO₃H was then carried out and was shown to occur with a high level of diastereocontrol: the reagent approaches the diene moiety syn to the amide group, which is likely to be as a consequence of hydrogen bonding between the amide C?O bond and the peracid hydrogen. Carbanionic functionalization of the spirocyclohexa‐2,5‐diene oxindoles was then examined, leading to an unprecedented rearrangement of the strained spiro system into dearomatized phenanthridinones. Upon treatment with lithium diisopropylamide (LDA) at ?40 °C, the dienes rearranged to provide a phenanthridinone lithium enolate intermediate that was trapped by electrophiles including alkyl halides and aldehydes. Interestingly, alkylation and hydroxyalkylation occurred with different regiocontrol. DFT calculations were performed that rationalize the observed skeleton rearrangement, emphasizing the role of LDA/diisopropylamine in this rearrangement. The proposed mechanism thus relies on a thermodynamically driven diisopropylamine‐mediated proton transfer with the cleavage of the diene–amide C?O bond as the key step.     

Estimating the intensity of a random measure by histogram type estimators

The purpose of this paper is to estimate the intensity of some random measure N on a set ${\mathcal{X}}$ by a piecewise constant function on a finite partition of ${\mathcal{X}}$ . Given a (possibly large) family ${\mathcal{M}}$ of candidate partitions, we build a piecewise constant estimator (histogram) on each of them and then use the data to select one estimator in the family. Choosing the square of a Hellinger-type distance as our loss function, we show that each estimator built on a given partition satisfies an analogue of the classical squared bias plus variance risk bound. Moreover, the selection procedure leads to a final estimator satisfying some oracle-type inequality, with, as usual, a possible loss corresponding to the complexity of the family ${\mathcal{M}}$ . When this complexity is not too high, the selected estimator has a risk bounded, up to a universal constant, by the smallest risk bound obtained for the estimators in the family. For suitable choices of the family of partitions, we deduce uniform risk bounds over various classes of intensities. Our approach applies to the estimation of the intensity of an inhomogenous Poisson process, among other counting processes, or the estimation of the mean of a random vector with nonnegative components.     

Dihydrogen to dihydride isomerization mechanism in [(C5Me5)FeH2(Ph2PCH2CH2PPh2)]+ through the experimental and theoretical analysis of kinetic isotope effects

The isomerization of complex [Cp*Fe(dppe)(eta2-H2)]+, generated in situ by low-temperature protonation of Cp*Fe(dppe)H with either HBF4 or CF3COOH, to the dihydride tautomer trans-[Cp*Fe(dppe)(H)2]+ is irreversible and follows first-order kinetics in the -10 to +15 degrees C range with Delta H double dagger = 21.6 +/- 0.8 kcal mol(-1) and DeltaS double dagger = 5 +/- 3 eu. The isomerization rate constant is essentially independent of the nature and quantity of a strong acid. Density functional theory (DFT) calculations on various models, including the complete system at both the quantum mechanics/molecular mechanics (QM/MM) and full QM levels, probe the relative importance of steric and electronic effects for the relative stability of the nonclassical and classical isomers and identify two likely isomerization mechanisms: a "direct" pathway involving simultaneous H-H bond breaking and cis-trans isomerization and a "via Cp" pathway involving agostic C5Me5H intermediates. Both pathways are characterized by activation energies in close correspondence with the experimental value (21.3 and 22.2 kcal mol(-1), respectively). Further kinetic studies were carried out for the Cp*Fe(dppe)H + CF3COOD and Cp*Fe(dppe)D + CF3COOD systems at 273 K. The [Cp*Fe(dppe)(eta2-HD)]+ complex establishes a very rapid isotope redistribution equilibrium with the eta2-H2 and eta2-D2 analogues. The equilibrium constant value (K = 3.3 +/- 0.3) indicates a significant equilibrium isotope effect. Simulation of the rate data provides access to the individual isomerization rate constants kHH, kHD, and kDD for the three isotopomers, yielding kinetic isotope effects: kHH/kHD = 1.24 +/- 0.01 and kHD/kDD = 1.58 +/- 0.01 (and, consequently, kHH/kDD = 1.96 +/- 0.02). The analysis of the DFT-calculated frequencies, using the [Cp*Fe(dhpe)H2]+ model system, for the [Cp*Fe(dhpe)(eta2-XY)]+ isotopomers as well as transition states for the "direct" (TSdir) and "via Cp" (TSrot) pathways (X = H, D) allowed the computation of the expected isotope effects. A comparison with the experiment strongly suggests that the mechanism occurs via the "direct" pathway for the present system, although the small difference in the calculated energy barriers suggests that the "via Cp" pathway may be preferred in other cases.