一种基于MEMS技术的PDMS微型分流器的研制

本文采用三层光刻工艺制作了基于聚二甲基硅氧烷(Polydimethylsiloxane,PDMS)的V形微分流器。引入牺牲层技术,解决了不同胶层间的界面互融问题,讨论了不同胶层间显影液对图形质量的影响。所制得的分流器工艺简单,结构形貌良好,具有良好的微流控制作用,满足器件使用要求。     

双波长分光光度法测定有机弱酸弱碱的解离常数

本文提出了一种测定有机一元弱酸弱碱解离常数的新方法———双波长分光光度法。该方法是在选定的一对工作波长下测定相同浓度不同pH值的有机一元弱酸弱碱水溶液的吸光度,利用所推导的公式作图求得pKa(或pKb)。利用本方法测定了甲基橙、溴甲酚绿、苯酚和苯胺等多种常见的有机一元弱酸弱碱的解离常数,结果十分满意。与传统的单波长分光光度法相比,双波长法测定结果的精密度和准确度更高。     

TiO2-WO3负载硅钨酸盐聚苯胺膜电极的电化学行为及电催化性能研究

用循环伏安法制备了金属氧化物(TiO2-WO3)负载硅钨酸盐聚苯胺膜修饰玻碳电极(PAn/SiW12/TiO2-WO3/GC),优化了聚合条件,并对该化学修饰电极的电化学行为,包括溶液pH值的影响和电极的稳定性等进行了研究。研究结果表明,此修饰电极聚合物膜不但保持了该杂多酸的电化学活性和电催化性能,又具有良好的稳定性。在0.5 mol/LH2SO4溶液中,该膜电极中的SiW12的第2个还原峰对BrO3-有很好电催化活性,催化过程符合EC平行催化机理。     

氢化物发生-原子荧光光谱法测定高纯阴极铜中硒、碲

本文报道了采用氢化物发生-原子荧光光谱法(HG-AFS)测定高纯阴极铜中硒、碲。实验考察了盐酸、三氯化铁的浓度对氢化物发生效率的影响,探讨了铜和其它共存元素的干扰情况。该法测定硒、碲的检出限分别为0.27μg/L、0.11μg/L,加标回收率分别为94.9%～114.0%、91.8%～105.3%,精密度为1.5%～7.8%。     

离子对色谱法测定万乳康注射液中淫羊藿苷和盐酸左旋咪唑含量

建立了反相离子对色谱法同时测定万乳康样品中淫羊藿苷和盐酸左旋咪唑的含量。本法使用Shim-pack VP-ODS色谱柱(250×4.6 mm,5μm),该流动相为65%甲醇(V/V),10.0 mmol/L的十二烷基磺酸钠,pH=3.0;等度洗脱样品中的淫羊藿苷和盐酸左旋咪唑。紫外检测波长270 nm。结果表明:淫羊藿苷测定的线性范围为2.73~54.58μg/mL,加标回收率为99.45%~100.69%,理论塔板数达6 641;盐酸左旋咪唑测定的线性范围为26.23~524.54μg/mL,加标回收率为99.58%~100.23%,理论塔板数5 564。该方法可用于淫羊藿提取物和万乳康样品中的淫羊藿苷和盐酸左旋咪唑的测定。     

利用MCNPX模拟研究不同中子源对有源符合中子法的影响

利用MCNPX软件建立了有源井型符合计数器(简称AWCC)测量模型,模拟了诱发中子源分别为Am-Li源和Am-Be源时AWCC测量贫化铀的中子符合计数率,研究了两种诱发中子源下AWCC测量贫化铀质量的精度.研究表明,Am-Be源引起的诱发中子符合计数率低于Am-Li源引起的诱发中子符合计数率,Am-Be源下的质量刻度曲...     

燮理阴阳胶囊的制备与质量标准研究

为研制燮理阴阳胶囊生产工艺,并建立相应的质量标准,采用正交实验法进行了工艺研究,采用薄层色谱法进行了鉴定,确立了水煎提取的工艺条件,建立了知母、熟地黄、淫羊藿的鉴别方法。该制剂的制备工艺简单易行,质量检定方法可行,质量稳定。     

Pressure Effects on Thermodynamics of Phase Behavior in Polystyrene/Methylcyclohexane Solutions

The calculations presented in this paper are based on the Sanchez-Lacombe(SL)lattice fluid theory.The interaction energy parameter,g12/k,required in this approach was obtained by fitting the cloud points of polystyrene(PS)/methylcyclohexane(MCH)polymer solutions under pressure.The SL lattice fluid theory was used to calculate the spinodals,the binodals,and the Flory-Huggins(FH)interaction parameter of the solutions.The calculated results show that the SL lattice fluid theory can describe the dependences of thermodynamics of PS/MCH solutions on temperature and pressure very well.However,the calculated enthalpy and the excess volume changes indicate that the Clausius-Clapeyron equation cannot be suitable to describe pressure effect on PS/MCH solutions.Further analysis on the thermodynamics of this system under pressure shows that the role of entropy is more important than the excess volume in the present case.     

Diffusion of Acetic Acid Across Oil/Water Interface in Emulsification-Internal Gelation Process for Preparation of Alginate Gel Beads

Alginate has been widely used in cell microencapsulation and drug delivery systems in the form of gel beads or microcapsules.Although an alternative novel emulsification-internal gelation technology has been established and both the properties and the potential applications of the beads in drug delivery systems have been studied,the mechanism has not been well understood compared with the traditional droplet method(external gelation technology).On the basis of our previous knowledge that the novel technology is composed of complicatedly consecutive processes with multistep diffusion and reaction,and the diffusion of acetic acid across oil/water interface being the prerequisite that determines the occurrence and rate for the reactions and the structures and properties of final produced gel beads,a special emphasis was placed on the diffusion process.With the aid of diffusion modeling and simple experimental design,the diffusion rate constant and diffusion coefficient of acetic acid across oil/water interface were determined to be in the orders of magnitude of 10-6 and 10-16,respectively.This knowledge will be of particular importance in understanding and interpreting the formation,structure of the gel beads and the relationship between the structure and properties and guiding the preparation and quality control of the gel beads.     

酶催化脂肪族聚酯的合成

脂肪族聚酯是一种可生物降解的新型高聚物,可通过化学催化、发酵和酶催化来合成.酶催化合成聚酯是一种新型的环境友好绿色化学技术,可以在温和条件下高效的合成聚酯,有着传统聚合方法难以比拟的优势.尤其是特种酶的应用,为传统方法难以合成的聚酯,开辟了一条新的合成途径.本文综述了脂肪酶催化缩聚、酯交换、内酯开环聚合等聚酯合成方法,并讨论了反应参数(如溶剂、温度、酶和单体的浓度)对反应的影响.