Conjugate addition of organocopper reagents in dichloromethane to α,β-unsaturated esters

Organocopper reagents in conjunction with Lewis acid activators provide greater stability than traditional cuprate reagents while maintaining the reactivity needed for conjugate addition reactions in dichloromethane. Whereas cuprates engage in cross-coupling pathways, organocopper nucleophiles are more selective for conjugate addition. The utility of organocopper reagents in dichloromethane for the conjugate addition to α,β-unsaturated esters is expanded upon herein.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Synthesis, crystal structure and magnetic property of the novel dinuclear nickel(II) complex with 4-(p-methoxyphenyl)-3,5-bis(pyridine-2-yl)-1,2,4-triazole

A novel dinuclear nickel(II) complex, [Ni₂(MOBPT)₂Cl₂(H₂O)₂]Cl₂ · 7H₂O (MOBPT = 4-(p-methoxyphenyl) −3,5-bis(pyridine-2-yl)-1,2,4-triazole), has been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction methods. The crystal structure determination shows that the dinuclear Ni₂N₈ unit is almost planer in which each Ni^II ion is coordinated by four nitrogen atoms from MOBPT equatorially and a water molecule and a chloride ion axially in a distorted octahedral geometry. Magnetic measurements reveal a relatively weak antiferromagnetic exchange in the complex.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

纳米分辨率的三维形貌检测仪

从光干涉方式，瞳窗关系和光源带宽等基本关系出发，利用空间不变系统理论解析了相移显微干涉检测系统中衍射效应的影响。为了减小横向分辨率对纵向分辨率的影响，利用相关信息提取或数字滤波的方法，获得了纳米分辨率的三维形貌。     

Synthesis, dual fluorescence, and fluoroionophoric behavior of dipyridylaminomethylstilbenes

The synthesis, dual fluorescence, and fluoroionophoric behavior of two donor-sigma spacer-acceptor (D-s-A) compounds, trans-4-(N,N-bis(2-pyridyl)amino)methylstilbene (1H) and trans-4-(N,N-bis(2-pyridyl)amino)methyl-4'-cyanostilbene (1CN), are reported and compared to that of trans-4-(N,N-bis(2-pyridyl)amino)methyl-4'-(N,N-dimethylamino)stilbene (1DPA). To gain insights into the dual fluorescence properties for 1H and 1CN in polar but not in nonpolar solvents, model compounds resulting from a replacement of the stilbene group by alkyl (2R) or xylyl (2X) groups or from a replacement of the dipyridylamino (dpa) group by dianisoleamino (3AA), diethylamino (3EE), methylanilino (3MP), or diphenylamino (3PP) groups also have been investigated. In addition to 1H and 1CN, all four compounds of 3 display dual fluorescence. The locally excited (LE) fluorescence mainly results from the stilbene group and the ICT fluorescence from the through-bond interactions between the amino donor and the stilbene acceptors. In the presence of transition metal ions such as Zn(II), Ni(II), Cu(II), and Cd(II), the ICT processes are switched from dpa (D) --> stilbene (A) in 1H and 1CN to stilbene (D) --> dpa/metal ion (A) in their complexes. Whereas the ICT states for the complexes are generally nonfluorescent, an exception was found for the case of 1H/Zn(II). As a result, substituent-dependent fluoroionophoric behavior has been demonstrated by 1H, 1CN, and 1DPA in response to Zn(II).     

Study on the interaction of platinum(IV), gold(III) and silver(I) ions with DNA

Fluorescence, absorption spectra have been produced by the interaction of platinum(IV), silver(I) and gold(III) ions with the berberine–DNA system (berberine, Scheme 1). Platinum(IV) and gold(III) ions show different effects from that of silver(I) ion on the spectral characteristics of the berberine–DNA system. Quenching fluorescence is seen with platinum(IV) and gold(III) ions addition, whereas increasing fluorescence is observed for silver(I) ions. The addition of gold(III) and silver(I) ions cause an increase in absorption of the berberine–DNA system. The above results suggest that different metal ions exhibit different affinities when binding to DNA correlates well with the ions’ charge, structure and the coordination ability.     

Hydrodynamic simulation of cell docking in microfluidic channels with different dam structures

The immobilization of biological cells in micro-devices requires high efficiency and easy control while maintaining cell viability. One approach for cell immobilization is to utilize constriction structures such as dams to trap cells in microfluidics. In this paper, we present a comprehensive hydrodynamic analysis of two different types of constriction structures for cell immobilization: dams either in perpendicular or in parallel to the main flow route. Various structural models and experimental conditions were compared for cell docking and alignment, and the pressure and velocity profiles of the flow in the micro-channels and the hydrodynamic force and shear stress on the docked cells were calculated based on fluid dynamic theory and numerical simulation. The effects of the dam structures and cell docking on the flow properties, the transportation efficiency, and the induced stress on the docked cells were analyzed. Improved hydraulic pressure profiles in the auxiliary inlets were discussed for the modulation of the flow characteristics and attenuation of hydrodynamic forces exerted on the cells. Furthermore, a new design combining the advantages of perpendicular and parallel dam structures was proposed for cell-based microfluidics.     

DFT study on the geometric, electronic structure and Raman spectra of 5,15-diphenylporphine

The ground state geometric, electronic structure and Raman spectra of 5,15-diphenylporphine (H(2)DPP) have been studied using B3LYP/6-31G(d) method and compared with that of well-studied free base porphine (H(2)P) and meso-tetraphenylporphine (H(2)TPP). Calculation shows that 5,15-substitution causes remarkable in-plane distortion, whereas the resulting out-of-plane distortion is negligible. The calculated electronic structure of H(2)DPP is consistent with the absorption spectra compared with H(2)P and H(2)TPP. The calculated vibrational frequencies of H(2)DPP scaled with a single factor of 0.971 agree well with experimental data (the rms error is 8.0 cm(-1)). The assignment of experimental Raman bands of H(2)DPP was discussed on the basis of theoretical calculation and the comparison with that of H(2)P and H(2)TPP. The splitting of some vibrational modes involving the motion of C(m) atom, such as nu(1), nu(8), and nu(10), was observed and was attributed to the diversification of the environment around C(m) atoms. As the shift of absorption peaks, the shift of some structure-sensitive Raman bands of H(2)DPP form that of H(2)TPP and H(2)P was attributed to the in-plane nuclear reorganization (IPNR) induced by phenyl-substitution, though the contribution of nonplanarity mechanism could not be excluded completely.     

Characterization of cyclodextrin-modified infrared chemical sensors: Part I. Modeling the mechanisms of interaction

To explore the properties of cyclodextrins (CDs) as an optical sensing phase, the behavior of immobilized CD in interaction with analytes was studied in this work. CDs having different cavity sizes were immobilized onto the surface of infrared (IR) internal reflection-sensing element (IRE) to kinetically monitor the behavior of CD in interaction with analytes. Several aromatic compounds having various molecular sizes and functional groups were used to characterize the interaction mechanism. A two-layer modification method was proposed in this work, which utilized a thin hydrophobic film (polyvinyl benzyl chloride) to stick on the IRE and to covalently bond to the CDs through an ethylene diamine linker. The synthesized CD phases exhibited high stability in aqueous solution. To analyze the behavior during the formation of complexes between the guest molecules and the CD phases, we modeled the interaction behavior and treated the kinetic data with the theoretical equations developed in this work. The results indicate that the behavior of the interaction between guest molecules and CDs was explained by considering the formation of two types of complexes: adsorbed complexes and inclusion complexes. The formation of the inclusion complexes was relatively fast, the time required to reach equilibrium could be shorter than a few minutes. The adsorbed complexes were also observed, but their rate of formation was relatively slow; equilibrium could be reached at times greater than 60 min. Based on the signals observed under equilibrium conditions, the concentration of inclusion complexes was approximately three times than that of the adsorbed complexes.