多环麝香的分子结构和香气之间的关系

本文综述了多环麝香的当前进展,并提出了系统的分类方法。对各种多环麝香(茚满型,萘满型,异色满型,氢化引达省型,苊型)香味与分子结构之间关系的研究进行了总结,还作了比较。并描述了多环分子中环上取代基的性质,数量和位置对麝香香味的影响。     

116例冠心病患者血清中钙镁镉铅铍含量的探讨

测定了１１６例冠心病患者血清中钙、镁、镉、铅、铍的含量并与正常对照组比较。结果显示，常量元素钙、镁与微量元素镉、铅含量降低，而铍的含量升高。它们之间的差异有显著性或高度显著性，Ｐ〈０．０５或Ｐ〈０．０１。     

酞菁钴液相催化氧化羰基硫(COS)的研究

本文首次报道在液相中，用金属酞菁催化氧化脱除羰基硫（COS）。发现COS先被水解成HS~－，HS~-再被氧化成S，酞菁钴（CoPC）的活性高于其它金属酞菁（MPC），酞菁苯环上推电子基因使酞菁的催化活性提高，双核酞菁钴的活性高子单核酞菁钴。D296树脂负载的酞菁钴的催化活性高于均相酞菁钴的活性。     

合成香料β-大马酮的高效液相色谱分析

本文提出了用分析型HPLC仪器制备β-大马酮标准品的方法及用HPLC测定β-大马酮含量的方法。制备色谱柱为Zorbax SIL 9.4 mmφ×25cm,流动相为石油醚(30～60℃)/乙醚98.5/1.5。分析用色谱柱为Shim CLC SIL 6 mmφ×15cm(岛津全多孔硅胶柱),流动相为石油醚(60—90℃)/无水乙醇99.88/0.12,检测器为紫外可见分光光度检测器。波长253nm或302nm,标准曲线的线性范围0～1.4mg/ml。峰高或峰面积均可用于测定,回收率100.7%。     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.

     

特征线法在求解非线性液相吸附色谱模型中的应用

本文应用特征线法求解非线性液相吸附色谱分离过程模型，论述了特征线法的原理和步骤，讨论了时间步长和空间步长对模型数值解的影响，并用色谱分离甘露醇和山梨醇以及分离蔗糖和还原糖的实验进行验证，用特征线法计算的理论流出曲线与实验流出线吻合较好。本文还分折了模型中各个参数的灵敏度，结果表明：吸附等温方程Q＝Ci*／（ai＋biCi*）中参数ai比参数bi以及总传质系数ki有更高的灵敏度。     

Separation and determination of podophyllum lignans by micellar electrokinetic chromatography

A micellar electrokinetic chromatography method was established for the quantitative analysis of seven podophyllum lignans in Podophyllum emodi Wall. var. chinesis sprague. The optimum buffer system was 10 mM NaH2PO4-5 mM borate-100 mM sodium dodecylsulfate-30% isopropanol (pH 7.20). Voltage was 18 kV and detection at 214 nm. The second derivative chromatogram was used to determine a low-content component and those not fully separated from adjacent ones. The RSD values of migration times and peak areas were <2.2 and <5.5%, respectively. The effects of several CE parameters on the resolutions were studied systematically.     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.     

Localized molecular orbitals and the problem of quasi-aromaticity in trinuclear molybdenum cluster compounds with cores of the type [MO3(μ3-X)(μ-Y)3] (X, Y = O, S, n = 4; X = O, Y = Cl, n = 5)

Calculations of localized molecular orbitals (LMO) and their energy levels for the cluster cores [MO₃O₄]⁴⁺, [MO₃SO₃]⁴⁺, [MO₃OS₃]⁴⁺, [Mo₃S₄]⁴⁺ and [MO₃OCl₃]⁵⁺ have been made by the use of energy-localized CNDO/2-LMO. The results of these LMO calculations show that the six-membered closed and continuous π-conjugated systems around the [MO₃Y₃] rings, each of which is formed from three synergically connected three-centered two-electron π bonds, is the most significant feature of the electronic structure for the quasi-aromatic clusters [Mo₃(μ₃-Y)(μ-X)₃]⁴⁺ (X, Y = O, S), and the size and electronegativity of the bridging Y atoms exhibit significant effects on the degree of quasi-aromaticity of these cluster compounds. For the non-aromatic reference cluster [Mo₃OCl₃]⁵⁺, the results of our calculations also show a bonding scheme with only one isolated π bond, thus leading to the loss of quasi-aromaticity; and meanwhile, there is a pair of extra electrons localized on the apical molybdenum atom of the Mo₃ triangle, thus with three Mo---Mo single bonds.