Development and validation of a liquid chromatographic method for the analysis of positron emission tomography radiopharmaceuticals with Ru(bpy)(3)(2+)-KMnO(4) chemiluminescence detection.

A sensitive, selective and rapid high-performance liquid chromatographic (HPLC) method with chemiluminescence (CL) detection was developed and validated for the analysis of positron emission tomography (PET) radiopharmaceuticals. This method is based on the CL reaction of PET compounds with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] and acidic potassium permanganate [KMnO(4)]. After optimization of the reaction conditions, 12 of the 14 PET compounds investigated could be successfully detected and showed good performance in terms of sensitivity, linearity and reproducibility. In particular, for compounds with a tertiary amine functional group, the limits of detection were ppb levels for a 20 microL injection volume. Finally, this method was used to determine PET compounds for calculating of specific radioactivity in pharmaceutical samples.     

Selective determination of tryptophan-containing peptides through precolumn derivatization and liquid chromatography using intramolecular fluorescence resonance energy transfer detection.

A selective and sensitive fluorometric determination method for native fluorescent peptides has been developed. This method is based on intramolecular fluorescence resonance energy transfer (FRET) detection in a liquid chromatography (LC) system following precolumn derivatization of the amino groups of tryptophan (Trp)-containing peptides. In this detection process, we monitored the FRET from the native fluorescent Trp moieties (donor) to the derivatized fluorophore (acceptor). From a screening study involving 10 fluorescent reagents, we found that o-phthalaldehyde (OPA) generated FRET most effectively. The OPA derivatives of the native fluorescent peptides emitted OPA fluorescence (445 nm) through an intramolecular FRET process when they were excited at the excitation maximum wavelength of the Trp-containing peptides (280 nm). The generation of FRET was confirmed through comparison with the analysis of a non-fluorescent peptide (C-reactive protein fragment (77 - 82)) performed using LC and a three-dimensional fluorescence detection system. We were able to separate the OPA derivatives of the Trp-containing peptides when performing LC on a reversed-phase column. The detection limits (signal-to-noise ratio = 3) for the Trp-containing peptides, at a 20-microL injection volume, were 41 - 180 fmol. The sensitivity of the intramolecular FRET-forming derivatization method is higher than that of the system that takes advantage of the conventional detection of OPA derivatives. Moreover, native non-fluorescent amines and peptides in the sample monitored at FRET detection are weaker than those of conventional fluorescence detection.     

Hyperfine interaction of13O and23Mg implanted in Pt

The spin relaxation timeT ₁ for short-lived beta emitters¹³O and²³Mg implanted in Pt have been measured for the first time;T ₁T¹³O) = 2.90 ±0.65 Ks andT ₁ T(²³Mg) = 1665 ±140 Ks. The Knight shift for¹³O in Pt was measured at 300 K to beK(¹³O) = +(4.23 ±0.14) × 10^–3. In the case of¹³O, the Knight shift is unusually large and the relaxation time is unusually fast compared with other interstitial impurities in Pt. A KKR band-structure calculation reproduces the present large Knight shift fairly well.     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Stress relaxation under large step equibiaxial elongation for low‐density polyethylene

The stress relaxation under large step equibiaxial elongation for low‐density polyethylene with long‐chain branches revealed that the time‐strain separability holds in relaxation modulus G_B(t, ε_B), and damping function h_B(ε_B) exhibits weaker equibiaxial elongational strain ε_B dependence than that predicted by the Doi–Edwards theory without the independent alignment approximation. Dependencies of damping function h(γ) for step shear deformation and h_B(ε_B) on stretch ratio α of polymer contour length and orientation of a polymer chain in direction of the maximum orientation were evaluated, and it was found that the α dependencies of h(γ) and h_B(ε_B) are different, whereas dependencies of h(γ) and h_B(ε_B) on the orientation coincide fairly well. These results indicate that the damping is dominated by the chain orientation rather than α. This implies that withdrawal of long‐chain branches into tube of a backbone chain occurs when the orientation of the long‐chain branches is large and friction force against the branch point withdrawal is small. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1275–1284, 2009     

Highly sensitive determination of free fatty acids in human serum by high-performance liquid chromatography with fluorescence detection

Endotoxins from four bacterial species extracted by three different procedures were acid-methanolyzed and the methyl esters of the fatty acids were analyzed by packed-column gas chromatography. There were qualitative and quantitative differences in the fatty acid profiles of the lipopolysaccharides isolated from four Gram-negative bacteria. Our data show considerable lot-to-lot variations in amounts of four methyl esters from the same bacterial serotype extracted by the same procedure and in the same bacterial serotype extracted by different procedures. These results indicate that extraction and perhaps culture conditions, as well as bacterial species, affect the fatty acid composition of endotoxins, hydrolyzed and derivatized by these procedures.     

TDPAC study of mechanically alloyed amorphous andintermetallic Fe-Hf alloys

Time differential perturbed angular correlation spectra of the amorphous Fe₅₇Hf₄₃ alloy prepared by mechanical alloying (MA) andthe intermetallic compounds FeHf₂ were measured. The short-range structures in amorphous Fe₅₇Hf₄₃ andintermetallic compounds of FeHf₂ andFe₂Hf are compared from a microscopic point of view.     

Studies of multilayers of Cu-Hf with a variable-energy positron beam

We report on the results of depth-profiling experiments of multilayers of Cu-Hf using a slow position beam. Experimental data reveal that the Hf layers contain many open-volume type defects and that there might be thin oxidized Hf that reduces theS parameter in the interfaces between Cu-Hf.     

Isopropenyldihydrofuran derivatives. Preparation and reactions of some isopropenyldihydrofurandicarboxylates

Diethyl 5-isopropenyl-4,5-dihydrofuran-2,3-dicarboxylate 1a and methyl 5-isopropenyl-3-methoxy-carbonyl-4,5-dihydrofuran-2-acetate 2a were prepared by cylization of diethyl 2-oxosuccinate or dimethyl 3-oxoglutarate with (E)-1,4-dibromo-2-methyl-2-butene. Their chemical properties were studied.     

Synthesis of thermotropic liquid crystal polyimide and its properties

Thermotropic liquid crystal polyimide which has neither an ester linkage nor a carbonate linkage was prepared by the polymerization of 1,2,4,5-benzenetetracarboxylic dianhydride (PMDA) and 1,3-bis[4-(4′-aminophenoxy)cumyl)]benzene (BACB). This polyimide shows the liquid crystal phase at 549-593 K. Mixing this liquid crystal polyimide or copolymerizing BACB decreases the melt viscosity of the thermoplastic polyimide (Aurum). © 1994 John Wiley & Sons, Inc.