Charge transport in a mixed ionically/electronically conducting, cationic, polyacetylene ionomer between ion-blocking electrodes

The electrical behavior of the cationic, polyacetylene-based, conjugated ionomer, poly[(2-cyclooctatetraenylethyl)trimethylammonium trifluoromethanesulfonate], sandwiched between gold electrodes is reported. The steady-state current of this mixed ionically/electronically conducting system is assigned to be unipolar diffusive hole transport for voltages below approximately 1.4 V, giving way to bipolar migratory transport above approximately 1.4 V. In the low-voltage regime, a non-Faradaically controlled doping model is proposed where p-doping at the anode is balanced by the charging of an ionic double layer at the cathode. In the high-voltage regime, n- and p-type regions extend from the electrodes as the voltage becomes sufficient to drive disproportionation and the electric field required by the redistribution of ions begins to substantially influence carrier transport. The assignment of a transport mechanism is primarily based on analyzing the decay of the steady-state system under short-circuit and open-circuit conditions. First, it is shown that the power describing the power-law decay of the short-circuit current is characteristic of the steady-state carrier profile. Second, it is argued that a component of the time-dependent, open-circuit voltage decaying more rapidly than the time scale for ion motion is indicative of a substantial migratory component to steady-state transport, as observed in the high-voltage regime. The hole and electron mobilities are estimated to be on the order of 10(-7)-10(-6) cm(2) V(-1) s(-1).     

Artin braids and the groups and spaces connected with them

Papers on braid theory and some of its generalization and applications, reviewed in Referativnyi Zhurnal Matematika during 1953–1977, as well as individual papers on an earlier period, are surveyed.Translated from Itogi Nauki i Tekhniki, Algebra, Topologiya, Geometriya, Vol. 17, pp. 159–227, 1979.     

Laser action of C,N, O,F, Cl,and Br in hollow cathode discharges

C, N, O, F, Cl, and Br red and infrared laser emission was investigated using hollow cathode discharges in gas mixtures of helium and molecules containing the corresponding atoms. A total of 33 laser lines with wavelengths from 0.7 to 2.0m was observed. Three laser lines of atomic C, five laser lines of atomic N, two laser lines of atomic Cl and five laser lines of atomic Br were observed for the first time. Dissociation charge transfer and dissociative excitation transfer are suggested as being responsible for populating the upper laser levels.     

On-line concentration of s-triazine herbicides in micellar electrokinetic chromatography using a cationic surfactant

A new method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was investigated using high-performance ion-exclusion/cation-exchange chromatography with conductimetric detection on a separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin in the hydrogen-form and an eluent comprising 1.5 mM sulfosalicylic acid–6 mM 18-crown-6 at pH 2.6, operated at 1.5 ml/min. Effective separation and highly sensitive conductimetric detection for the anions and the cations was achieved in about 14 min. Since the ionic balance (equivalents of anions/equivalents of cations) of acid rain waters of different pH (4.40–4.67) ranged from 0.97 to 0.94, evaluation of the water quality of acid rain was possible. This method was successfully applied to the simultaneous determination of the anions and the cations in acid rain transported from mainland China and North Korea to central Japan monitored by a meteorological satellite data analyzer.     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.     

Characterization of polyethylene glycol-modified proteins by semi-aqueous capillary electrophoresis

A new program to characterize polyethylene glycol-modified (PEGylated) proteins is outlined using capillary zone electrophoresis (CZE). PEGylated ribonuclease A and lysozyme were selected as examples. Five separation procedures were compared to select out the mixed buffer of acetonitrile-water (1:1, v/v) at pH 2.5 as the best to characterize the PEGylated proteins without sample pretreatment. Polyethylene oxide (PEO) with a high molecular mass of 8 x 10(6) was applied to rinse the capillary to form a dynamic coating which would decrease the undesirable proteins adsorbed to the inner wall of the silica. The electroosmotic flow (EOF) mobility of the five procedures was determined, respectively. It is found that acetonitrile is mainly responsible for the good resolution of PEGylated proteins with the help of PEO coating in the semi-aqueous system. The low EOF mobility and current in the semi-aqueous system might also have some responsibility for the high resolution. The semi-aqueous procedure described in this paper also demonstrates higher resolution of natural proteins than aqueous ones.     

14‐Membered Cyclopeptides from Paliurus ramosissimus and P. hemsleyanus

Six 14‐membered cyclopeptide alkaloids, i.e., ramosines A–C, mucronine J, and lotusines A and D, were isolated from the roots of Paliurus ramosissimus, and an additional four, hemsines A–D, from the roots of P. hemsleyanus. Among these, ramosines A–C ( 1, 5 , and 6 , resp.) and hemsines A and B ( 7 and 8 , resp.) are new bases of the amphibine‐B type, and hemsines C and D ( 9 and 10 , resp.) are new integerrine‐type alkaloids. Additionally, ramosine C ( 6 ) represents the first 14‐membered cyclopeptide alkaloid possessing a substitution (? OH) at C(13′). Their structural elucidations were based on spectral analysis and molecular‐modeling studies. Pronounced solvent effects in the ¹H‐ and ¹³C‐NMR spectra of these two types of alkaloids were observed.     

Decreasing the detection limits to ppq levels for high purity silicon analysis by instrumental neutron activation analysis with kilogram sampling weight

The amount of silicon sample used in instrumental neutron activation analysis (INAA) is generally less than twenty grams and the detection limits are in the range of ppb to ppt. The detection limits can be decreased further in several ways. Increasing neutron flux density, extending irradiation period and/or using more effective detector can improve the detection limits to some extent. Increasing sample weight, however, is a more feasible way to decrease the detection limits by a factor of hundreds with no new investment in existing irradiation/counting systems. In this work, two 8-inch high-purity silicon samples were analyzed by INAA to evaluate the validity and limitations of this concept in respect to neutron flux inhomogeneity, neutron shielding and -ray counting efficiency.     

Hamiltonian Systems and Darboux Transformation Associated with a 3 × 3 Matrix Spectral Problem

Starting from a 3 × 3 matrix spectral problem, we derive a hierarchy of nonlinear equations. It is shown that the hierarchy possesses bi-Hamiltonian structure. Under the symmetry constraints between the potentials and the eigenfunctions, Lax pair and adjoint Lax pairs including partial part and temporal part are nonlinearied into two finitedimensional Hamiltonian systems (FDHS) in Liouville sense. Moreover, an explicit N-fold Darboux transformation for CDNS equation is constructed with the help of a gauge transformation of the spectral problem.     

PTC: Full and Drift Particle Orbit Tracing Code for α Particles in Tokamak Plasmas

Fusion born α particle confinement is one of the most important issues in burning plasmas,such as ITER and CFETR.However,it is extremely complex due to the nonequilibrium characteristics,and multiple temporal and spatial scales coupling with background plasma.A numerical code using particle orbit tracing method(PTC)has been developed to study energetic particle confinement in tokamak plasmas.Both full orbit and drift orbit solvers are implemented to analyze the Larmor radius effects on α particle confinement.The elastic collisions between alpha particles and thermal plasma are calculated by a Monte Carlo method.A triangle mesh in poloidal section is generated for electromagnetic fields expression.Benchmark between PTC and ORBIT has been accomplished for verification.For CFETR burning plasmas,PTC code is used for α particle source and slowing down process calculation in 2D equilibrium.In future work,3D field like toroidal field ripples,Alfven and magnetohydrodynamics instabilities perturbation inducing α particle transport will be analyzed.