工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

Vacuum Fluctuations and Motion of a Charged Test Particle in a Cylindrical Spacetime

The effects of quantum electromagnetic fluctuations upon the motion of a test charged particle are examined in a cylindrical spacetime in which one spatial is compactified. The mean squared fluctuations in the velocity and position of the test particle are calculated. It is found that the random motion of the test particle will be anisotropic. The possible consequences for theories with extra compactified spatial dimensions are discussed.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

潜体在非均质流体中的平衡位置与平衡过程

以探空气球为例,讨论潜体在非均质流体中的平衡位置与平衡过程.     

飞秒激光脉冲在三能级有机分子介质中传播时的频谱分析

通过采用预估校正的时域有限差分法求解麦克斯韦-布洛赫方程,我们研究了飞秒激光脉冲在三能级有机分子(4,4-二甲氨基二苯乙烯分子)介质中传播时脉冲的频谱演化情况.在单光子共振情况下,即入射脉冲频率等于1、2能级之间的共振频率,对大面积入射脉冲,由于强的二次激发的作用,电场频谱中出现了在ω32附近振荡的频率成分,ω32是2、3能级之间的共振频率,说明对大面积入射脉冲二能级模型已经失效,需要采用多能级模型来描述分子介质.在双光子共振情况下,即入射脉冲频率等于1、3能级之间的共振频率的一半,由于介质中放大的自发辐射和四波混频的作用,部分入射脉冲能量转化为高频和低频电场成分的能量,分子介质表现出了很强的光功率限幅特性.     

Electro-optical performance of polymer stabilized cholesteric texture cell: The influence of chiral dopant and monomer concentration

Reverse-mode polymer stabilized cholesteric texture (PSCT) cells with various chiral dopant and monomer concentrations were fabricated. Experimental results indicate that the chiral dopant concentration and the monomer concentration significantly influence the threshold voltage and hysteresis of the cells. The chiral dopant and monomer deform the hysteresis loop. Increasing the monomer concentration reduces the width of the hysteresis loop of the reverse-mode PSCT cell.     

HL-2A װ��MW ������������ϵͳ��˿��Դ�����������

The main circuit topology, control hardware and control sequence of the cathode filament power supply for the HL-2A neutral beam heating system was introduced. Feedback control simulation of main circuit of filament power supply is carried out through MATLAB simulation software. It is found that the ripple factor is about 1%when the current is about 1000A, and the ripple coefficient increases to 3% when the current drops to 200A. Without the AC filter reactor in series L₁ and parallel harmonic filter LC in the low level control cabinet, the output current ripple coefficient becomes larger obviously. It shows that L₁ and LC not only absorb harmonic current, but also filter the chopper waveform after AC voltage regulation to make the output waveform smoother.