LiNi0.8Co0.2O2 / MWNTs复合物超级电容器电极材料的研究

Multiwalled carbon nanotubes (MWNTs) were used as the conductive additive in the electrode materials. The electrochemical properties of supercapacitors based on LiNi_0.8Co_0.2O₂ / MWNTs composite and LiNi_0.8Co_0.2O₂/acetylene black composite and MWNTs in 1.0 mol·L^-1 LiClO₄ / EC+DEC [V(EC)∶V(DEC)=1∶1] electrolyte were investigated by means of constant charge/discharge current tests, respectively. The experimental results show that the LiNi_0.8Co_0.2O₂ / MWNTs composite has better performance than that of others, and the maximum specific capacitance of the supercapacitor can reach 271.6 F·g^-1, while the energy density is up to 339.5 Wh·kg^-1. Furthermore, it is remarkable that the performance of MWNTs is better than that of acetylene black as the conductive additive.     

Li—Ni—La—O系复合氧化物催化剂上甲烷氧化偶联的研究

考察了Ｌｉ－Ｎｉ－Ｌａ－Ｏ系催化剂的组成、结构及反应条件对甲烷氧化偶联反应活性的影响。在７８０℃、ＣＨ４：Ｏ２：Ｎ２＝２：１：７、空速１５０００ｈ＾－１时，Ｃ２烃收率可达２５．８％。ＸＲＤ、ＩＲ、ＸＰＳ及ＳＥＭ等的结构分析表明，在ＬｉＬａ１－ｘＮｉｘＯ２催化剂中，当０．１≤ｘ≤０．９时，该催化剂由ＬｉＮｉＯ２和Ｌａ２Ｎｉ１－ｙＬｉｙＯ４－λ两相组成，ｘ＜０．３时出现了ＬｉＬａＯ２相，Ｌａ２Ｎｉ１－     

双-单齿芳香酰胺型配体桥联La3＋一维配位聚合物的合成与晶体结构

通过硝酸镧和双-单齿芳香酰胺型配体L {L＝1,4-双[(2'-苄胺甲酰基苯氧基)-甲基]苯}之间的反应得到了配位聚合物{[La(NO₃)₃]₂•L₃}_n, 并用X射线单晶衍射测定了配合物的晶体结构. 配合物为三斜晶系, _P1空间群, 晶胞参数a＝1.1298(2) nm, b＝1.2689(1) nm, c＝2.1030(3) nm, α＝81.189(9)°, β＝80.95(1)°, γ＝65.832(9)°, V＝2.7032(6) nm³, Z＝2, R＝0.0267, wR＝0.0679, La^3＋为9配位, 呈变形的三帽三角棱柱配位构型. 配合物通过配体的桥联作用形成一维环链相间的配位聚合结构, 由于相邻链间不存在氢键和π-π堆积作用, 所以配合物是以单链形式堆积排列.     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

聚芳醚酮高温长时间下的断裂行为3．韧性－脆性断裂转变

研究了聚芳醚酮（ＰＥＫ－Ｃ）在２００℃下长时间放置过程中拉伸断裂行为的变化．通过应力－应变实验、断面形貌观察及去老化现象的研究证实，２００℃下长时间放置后的ＰＥＫ－Ｃ的拉伸断裂行为，发生韧性－脆性转变，发生这一转变的时间约在５８９小时左右．伴随１９９℃下的拉伸过程中出现的去老化现象，决定于材料发生剪切屈服形变的能力，与韧性－脆性断裂行为转变有着本质的联系．     

钯催化下有机锡化合物的偶联反应在碳-碳键形成过程中的应用

本文述评了最近几年来钯催化的有机锡化合物与有机亲电试剂的交叉偶联反应在有机合成中用于碳-碳键形成的主要研究成果。主要讨论了直接交叉偶联反应,CO或烯键插入的交叉偶联反应和机理。     

Ga^3＋的新萃取体系的界面特性和胶团化作用研究

研究了Ｇａ~（３＋）协萃体系（Ｇａ~（３＋）－Ｄ_２ＥＨＰＡ－Ｈ_２ＭＰＡ－正十二烷－Ｈ_２ＳＯ_４）的界面吸附和胶团形成热力学，发现该萃取体系中［Ｈ_２ＭＰＡ］影响Ｄ_２ＥＨＰＡ和Ｈ_２ＭＰＡ的界面吸附性质。在中、高［Ｈ_２ＭＰＡ］范围内Ｄ_２ＥＨＰＡ与Ｈ_２ＭＰＡ的界面吸附行为相反，Ｄ_２ＥＨＰＡ的存在也影响Ｈ_２ＭＰＡ的界面吸附行为。研究了界面张力与各因素关系的数学模型，并获得某些胶团形成和界面吸附特性的物化参数。     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂     

2D层状焦磷酸锰(Ⅱ)[NH4]2[Mn3(P2O7)2(H2O)2]的结构和磁性研究

A two-dimensional layered manganese(Ⅱ) pyrophosphate, [NH₄]₂[Mn₃(P₂O₇)₂(H₂O)₂] (1), has been synthesized hydrothermally. Its structure is determined by single-crystal X-ray diffraction analysis. Its structure is built up by MnO₆ octahedra and P₂O₇ units, with ammonium NH₄⁺ cations residing in the interlayer regions. The manganese pyrophosphate layer consists of infinite chains of cis and trans edge sharing MnO₆ octahedra linked by P₂O₇ units. Magnetic susceptibility measurements show that this compound exhibits ferrimagnetic-like ordering below 3.2 K. Further study shows that there are two possible superexchange pathways via the oxygen anions in Mn²⁺ ions. Owing to the different bridging modes of O^2-, the competition between ferromagnetic interactions and antiferromagnetic interactions in Mn²⁺ ions results in the ferrimagnetic behavior of 1.