聚酰亚胺LB膜热解制备SiC薄膜的XPS研究

用XPS对沉积在硅基片上的聚酰亚胺LB膜以及由它真空热解制备的SiC薄膜进行了研究 ,并对其形成过程进行了跟踪分析 .XPS结果显示聚酰亚胺LB膜结构均匀 ,质量良好 ;真空热解时 ,约在 6 70℃时LB膜中的C与衬底Si反应形成SiC ;Ar离子溅射深度俄歇谱表明所制备的SiC膜中Si和C浓度成梯度分布 ,说明SiC是由Si和C相互扩散反应形成的     

酞菁敏化混晶TiO2薄膜的低温制备及其对罗丹明B的催化降解

以四磺酸酞菁铜(CuPcTs)为敏化剂,采用溶胶-凝胶法制备了酞菁敏化的TiO2溶胶,经浸渍提拉成膜并室温晾干,制得CuPcTs-TiO2薄膜.采用XRD,UV-Vis和SEM等测试手段对薄膜样品进行了表征,并通过罗丹明B的降解考察了薄膜的可见光催化性能.结果表明,TiO2为锐钛矿-板钛矿-金红石混晶结构,CuPcTs-TiO2薄膜对罗丹明B降解具有较高的光催化活性.CuPcTs敏化能有效提高TiO2的可见光催化活性,但过多的CuPcTs会使催化活性降低.在可见光照射条件下,罗丹明B主要是先脱乙基生成罗丹明,然后再逐步被分解.CuPcTs-TiO2薄膜在经2～3次循环使用后,其光催化活性趋于稳定.CuPcTs可牢固地负载于TiO2薄膜中,从而保证了CuPcTs-TiO2薄膜重复使用的稳定性.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

A new Sequiterpenoid from Eupatorium adenophorum Spreng

A new sequiterpenoid compound 8aα-hydroxy-1-isopropyl-4,7-dimethyl-1,2,3,4,6,8a-hexahydro-naphthalene-2,6-dione(1),together with seven known compounds anti-HH-dimer-coumarin(2),(-)-5-exo-hydroxy-bomeol(3),O-hydroxyl cinnamic acid(4),9β-hydroxy-ageraphorone(5),10Hα-9-oxo-ageraphorone(6),10Hβ-9-oxo-ageraphorone(7)and 9-oxo-10,11-dehydroageraphorone 8,was isolated from the leaves of Eupatorium adenopho-rum Spreng.The structures were elucidated by IR,~1H and ~(13)C NMR,EIMS,HMBC and single-crystal X-ray spec-tral data.     

Friedlnder反应研究进展

以邻氨基苯甲醛与各种酮发生的Friedl nder反应为主 ,全面介绍了国内外Friedl nder反应的研究近况。由于Friedl nder反应的反应条件温和、反应底物变化多样、反应产率高 ,而且合成产物的应用范围涉及天然产物化学、药物化学、金属有机化学等诸多领域 ,因此对Friedl nder反应的深入研究具有广阔的前景。参考文献2 8篇。     

配合物[Cu2(phen)2](SiW12O40)(H2O)7的合成、晶体结构及电化学分析

The title complex has been synthesized by the reaction of silicotungstic acid, 1,10-phenanthroline (phen) monohydrate and cupric acetate. The crystal structure belongs to triclinic system, space group P1 with a=1.158 46(15) nm, b=1.658 8(2) nm, c=1.664 4(2) nm, α=82.090(2)°, β=76.001(2)°, γ=86.531(2)°, and V=3.072 6(7) nm³, D_c=3.887 g·cm^-3, Z=2, F(000)=3 196. R₁=0.086 7, wR₂=0.185 8. The structure shows that the copper(Ⅱ) atom is coordinated with two nitrogen atoms from the one phen and three oxgygen atoms from three water, forming a distorted square-pyramid configuration The cyclic voltametric behavior of the complex is also reported. CCDC: 298807.     

荧光探针法研究可聚合有机分子(BMDM)/二苯醚的凝胶化过程

用荧光素作荧光探针 ,研究了可聚合凝胶因子 4,4′ 二 (α 甲基丙烯酰氧基 1 ,3 亚乙氧基羰基丙酰氨基 )二苯甲烷 (BMDM)在二苯醚的凝胶化过程中的聚集状态 .研究结果发现 ,与荧光素在二苯醚溶液中的荧光光谱相比 ,在凝胶中出现了 1 0～2 5nm的红移 ;而且发现分子凝胶的凝胶化时间随着BMDM浓度的增加而减小 .偏振荧光法研究分子凝胶的取向发现 ,该分子凝胶的形成过程是从各向同性的溶液(P0 =0 )向各向异性的溶胶 (P>0 )转变 ,再向各向同性的凝胶 (Pgel≈ 0 )转变的过程     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

三(2-氨基乙基)胺-镉(Ⅱ)-2-甲基咪唑三元配合物的合成、结构与抗微生物活性

The complex [Cd(tren)(meim)](ClO₄)₂ was synthesized and characterized by elemental analysis, IR and X-ray single-crystal diffraction. The compound crystallizes in monoclinic system, space group P2₁/m with a=0.786 8(2) nm, b=0.834 2(2) nm, c=1.496 2(4) nm, M_r=538.64, Z=2, F(000)=542, D_c=1.822 g·cm^-3, T=298(2) K, μ=1.435 mm^-1 and λ=0.071 073 nm. The structure was refined to R=0.045 8 and wR=0.123 1 for 1 489 observed reflections with I>2σ(I). The complex was valued for its antimicrobial activity against bacterial strands using the agar diffusion method. It was found to be active against the four test bacterial organisms. CCDC: 600198.     

Cr掺杂对K2La2Ti3O10光催化活性的影响

通过溶胶-凝胶法制备了层状钙钛矿结构的K₂La₂Ti₃O₁₀及Cr掺杂的K₂La₂Ti₃O₁₀，采用X-射线衍射(XRD)、紫外可见漫反射光谱(DRS)、X射线光电子能谱(XPS)等对K₂La₂Ti₃O₁₀及Cr掺杂K₂La₂Ti₃O₁₀进行了表征。以I^-为电子给体、分别在紫外和可见光辐射下研究了K₂La₂Ti₃O₁₀及Cr掺杂K₂La₂Ti₃O₁₀光催化分解水的产氢活性。采用第一性原理，计算了Cr掺杂对K₂La₂Ti₃O₁₀半导体能带结构和态密度的影响，从电子结构的变化揭示了掺杂引起光催化活性差异的原因。结果表明，Cr的掺入能够改善和提高K₂La₂Ti₃O₁₀的光解水的产氢活性；Cr改善和提高K₂La₂Ti₃O₁₀的光解水的产氢活性存在一个最佳的掺杂浓度；当Cr与Ti的物质量的比为0.02∶1时，紫外光催化分解水产氢速率为1 500 μmol·L^-1·h^-1，可见光催化分解水产氢速率为83.6 μmol·L^-1·h^-1，分别为K₂La₂Ti₃O₁₀掺杂改性前产氢速率的26和5倍。