Three‐Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission

Considering the instability and low photoluminescence quantum yield (PLQY) of blue‐emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d¹⁰ transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH₄)₂]CuPbBr₅ with new type of three‐dimensional (3D) anionic framework. [(NH₄)₂]CuPbBr₅ exhibits strong band‐edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH₄)₂]CuPbBr₅ also displays broadband red light emissions derived from self‐trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non‐perovskite bimetallic halide with highly efficient and stable blue light emission.     

SOFA评分联合超声对脓毒症合并AKI患者的预后价值分析

本文主要探究SOFA评分联合超声对脓毒症合并急性肾损伤(AKI)患者的预后价值。选取2017年1月~2019年1月本院脓毒症合并AKI患者50例作为观察组,并分为AKI 1、2、3期,将同期入院的50例脓毒症患者作为对照组,两组患者均采用SOFA评分联合超声进行预后评估。结果发现,观察组PDU评分低于对照组(P<0.05),RI值、SOFA评分高于对照组(P<0.05);不同分期的3组间的PDU评分、SOFA评分不同,随着AKI分期的增加,PDU评分降低、SOFA评分增加(P<0.05),但3组间的RI值并无不同(P>0.05);50例脓毒症合并AKI患者发生院内死亡率为44.00%。经单因素分析发现,年龄、机械通气时间、ICU住院时间、AKI分期、脓毒症休克、SOFA评分、PDU评分为影响患者预后不佳的因素(P<0.05);AKI3期、发生脓毒性休克、SOFA评分、PDU评分是脓毒症合并AKI患者预后不佳的独立因素(P<0.05),ROC曲线下面积(AUC)越大,对预后的预测效能越好,当AUC>70.00%时具有临床价值。两者联合显著高于单独应用SOFA评分(AUC=74.28%)或PDU评分(P<0.001)。上述结果说明,脓毒症合并AKI患者采用SOFA评分联合超声用于评估患者的预后,优于单独采用SOFA评分或超声,两者联合的预测价值更大。     

Metal ion-promoted fabrication of melanin-like poly(L-DOPA) nanoparticles for photothermal actuation

Melanin-inspired polymers are currently the focus of growing interest for a wide range of applications ranging from energy to biomedical area. Whilst researchers have made numerous attempts to prepare and utilize polydopamine nanoparticles(PDA NPs), they have made limited progress in developing and discovering another typical functional mimic of natural melanin, poly(levodopa)(P(L-DOPA)) NPs, probably due to the lack of facile synthetic strategies towards satisfactory structural and functional control of melanin-like NPs. Herein, we reported a one-pot preparation method towards P(L-DOPA) NPs with good yields and controllable size/property in an aqueous solution assisted by various metal ions(i.e., Ni(II), Mg(II), Ca(II), Fe(III), Mn(II), Co(II), Zn(II) and Cd(II)). Interestingly, the resulting P(L-DOPA) NPs exhibited enhanced light absorption and photothermal behaviors compared with well-established PDA NPs, which can be employed to further fabricate kinds of photothermal composite actuators with promising performances such as folding, switching, and forward-moving. This study offers a facile and robust way to synthesize new synthetic melanins beyond PDA, and facilitates further functional discovery and evolution of melanin-inspired polymers and composites.     

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.     

2020 Roadmap on Carbon Materials for Energy Storage and Conversion

Carbon is a simple, stable and popular element with many allotropes. The carbon family members include carbon dots, carbon nanotubes, carbon fibers, graphene, graphite, graphdiyne and hard carbon, etc. They can be divided into different dimensions, and their structures can be open and porous. Moreover, it is very interesting to dope them with other elements (metal or non‐metal) or hybridize them with other materials to form composites. The elemental and structural characteristics offer us to explore their applications in energy, environment, bioscience, medicine, electronics and others. Among them, energy storage and conversion are extremely attractive, as advances in this area may improve our life quality and environment. Some energy devices will be included herein, such as lithium‐ion batteries, lithium sulfur batteries, sodium‐ion batteries, potassium‐ion batteries, dual ion batteries, electrochemical capacitors, and others. Additionally, carbon‐based electrocatalysts are also studied in hydrogen evolution reaction and carbon dioxide reduction reaction. However, there are still many challenges in the design and preparation of electrode and electrocatalytic materials. The research related to carbon materials for energy storage and conversion is extremely active, and this has motivated us to contribute with a roadmap on ‘Carbon Materials in Energy Storage and Conversion’.     

Zero‐Dimensional Hybrid Cd‐Based Perovskites with Broadband Bluish White‐Light Emissions

Recently, low‐dimensional organic‐inorganic hybrid metal halide perovskites acting as single‐component white‐light emitting materials have attracted extensive attention, but most studies concentrate on hybrid lead perovskites. Herein, we present two isomorphic zero‐dimensional (0D) hybrid cadmium perovskites, (HMEDA)CdX₄ (HMEDA=hexamethylenediamine, X=Cl ( 1 ), Br ( 2 )), which contain isolated [CdX₄]^2? anions separated by [HMEDA]²⁺ cations. Under UV light excitation, both compounds display broadband bluish white‐light emission (515 nm for 1 and 445 nm for 2 ) covering the entire visible light spectrum with sufficient photophysical stabilities. Remarkably, compound 2 shows a high color rendering index (CRI) of 83 enabling it as a promising candidate for single‐component WLED applications. Based on the temperature‐dependent, powder‐dependent and time‐resolved PL measurements as well as other detailed studies, the broadband light emissions are attributed to self‐trapped excitons stemming from the strong electron‐phonon coupling.     

α‐FeOOH−MoO3 Nanorod for Effective Photo‐Fenton Degradation of Dyes and Antibiotics at a Wide Range of pH

It's highly significant to develop a novel catalyst, which can be active at a wide range of pH, for an effective photo‐Fenton reaction. In this work, α‐FeOOH?MoO₃ nanorod was prepared by a one‐step hydrothermal method and applied in photo‐Fenton degradation of organic pollutants. Benefit from the electron migration mechanism of Z‐scheme and excellent photoelectric performance, the catalyst exhibited superior photo‐Fenton activity in degradation of organic pollutants. In addition, the catalyst holds good stability after 5 recycles. These results demonstrated that this catalyst has wide application prospect in organic wastewater treatment.     

Concurrent suppression of Aβ aggregation and NLRP3 inflammasome activation for treating Alzheimer's disease

Alzheimer''s disease (AD) is a neurodegenerative illness accompanied by severe memory loss, cognitive disorders and impaired behavioral ability. Amyloid β-peptide (Aβ) aggregation and nucleotide-binding oligomerization domain (NOD)-like receptor protein 3 (NLRP3) inflammasome play crucial roles in the pathogenesis of AD. Aβ plaques not only induce oxidative stress and impair neurons, but also activate the NLRP3 inflammasome, which releases inflammatory cytokine IL-1β to trigger neuroinflammation. A bifunctional molecule, 2-[2-(benzo[d]thiazol-2-yl)phenylamino]benzoic acid (BPBA), with both Aβ-targeting and inflammasome-inhibiting capabilities was designed and synthesized. BPBA inhibited self- and Cu²⁺- or Zn²⁺-induced Aβ aggregation, disaggregated the already formed Aβ aggregates, and reduced the neurotoxicity of Aβ aggregates; it also inhibited the activation of the NLRP3 inflammasome and reduced the release of IL-1β in vitro and vivo. Moreover, BPBA decreased the production of reactive oxygen species (ROS) and alleviated Aβ-induced paralysis in transgenic C. elegans with the human Aβ₄₂ gene. BPBA exerts an anti-AD effect mainly through dissolving Aβ aggregates and inhibiting NLRP3 inflammasome activation synergistically.

Bifunctional molecule BPBA inhibits Aβ aggregation and NLRP3 inflammasome activation, thereby decreasing ROS and IL-1β in vitro and vivo; it synergistically prevents Alzheimer''s disease via alleviating Aβ neurotoxicity and reducing neuroinflammation.     

Research on Preparation Methods of Carbon Nanomaterials Based on Self-Assembly of Carbon Quantum Dots

Here, based on self-assembly of carbon quantum dots (CDs), an innovative method to prepare nanomaterials under the action of a metal catalyst was presented. CDs were synthesized by a one-step hydrothermal method with citric acid (CA) as the carbon source, ethylenediamine (EDA) as the passivator and FeSO₄•7H₂O as the pre-catalyst. In the experiment, it was found that the nano-carbon films with a graphene-like structure were formed on the surface of the solution. The structure of the films was studied by high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FT-IR), etc. The results demonstrated that the films were formed by the self-assembly of CDs under the action of the gas–liquid interface template and the metal catalyst. Meanwhile, the electrochemical performance of the films was evaluated by linear cyclic voltammetry (CV) and galvanostatic charge discharge (GOD) tests. In addition, the bulk solution could be further reacted and self-assembled by reflux to form a bifunctional magnetic–fluorescent composite material. Characterizations such as X-ray diffractometer (XRD), fluorescence spectra (FL), vibrating sample magnetometer (VSM), etc. revealed that it was a composite of superparamagnetic γ-Fe₂O₃ and CDs. The results showed that self-assembly of CDs is a novel and effective method for preparing new carbon nanomaterials.