UPLC-Q-TOF MS分析海洋鱼类血清皮质醇

皮质醇浓度是反映肾上腺皮质功能的重要指标之一,海洋鱼类血清中的皮质醇激素含量随应激强度呈现规律性变化,从而被广泛用来衡量应激水平的重要指标[1].     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

Coating Carbon Nanotubes with Europium Oxide

Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.     

1,4-二乙氧基苯的相转移催化合成

采用大孔型交联聚苯乙烯为载体研究制得新型季Lin盐型相转移催化剂Y98B，并将其于1，4－二乙氧基苯的催化合成反应，进行了产品的红外光谱分析和熔点测定，探讨了催化剂用量、对苯二酚与溴乙烷物的质量比、反应温度和反应时间等动力学条件对产品收率的影响。确定了在反应温度为70℃,mol对苯二酚：mol溴乙烷＝1：3．5，反应时间4h，催化剂用量3．0g的条件下产品收率可达84.3%。     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

γ—Mo2N合成过程中的热变化及中间产物的研究

采用ＤＴＡ技术，通过改变升温速率研究了γ－Ｍｏ２Ｎ合成过程中的热变化，并经ＸＲＤ，ＢＥＴ及ＩＲ测试，对ＤＴＡ曲线中的谱峰进行归属，考察了中间产物，ＤＴＡ结果表明，在ＭｏＯ３和ＮＨ３程序升温反应过程中有放热峰及吸热峰出现，且随升温速率的长高，放热峰面积与吸热峰面积之比逐渐减小，结合ＸＲＤ及ＩＲ结果可知，ＤＴＡ曲线听放热峰可归属为由ＭｏＯ３变化为ＭｏＯ２的还原峰，吸热峰则归属为由ＭｏＯ２变化为Ｍｏ２Ｎ     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

尼龙1216晶型转变的红外光谱研究

采用变温红外光谱研究了尼龙1216的Brill转变并测得Brill温度约为150℃。一些α谱带在转变过程中消失，氢键强度也急剧减弱。这些现象证明了Brill转变的“局部熔融”机理。