Applying Stochastic Algorithms to a Locomotive Scheduling Problem

This paper addresses a problem common to all railway networks. Given a fixed train timetable and locomotives (or other forms of traction) of various types, each train must be allocated a locomotive. This paper examines the use of stochastic algorithms for such a problem. Two types of algorithm are used—a simple ‘local improvement’ method, performed successively from randomly chosen starting points, and a ‘simulated annealing’ approach. Both are found to give considerably better results than a deterministic method in current use, and the annealing approach is probably the better stochastic method.     

On the Whitham Equations for the Defocusing Nonlinear Schrodinger Equation with Step Initial Data

The behavior of solutions of the finite-genus Whitham equations for the weak dispersion limit of the defocusing nonlinear Schrodinger equation is investigated analytically and numerically for piecewise-constant initial data. In particular, the dynamics of constant-amplitude initial conditions with one or more frequency jumps (i.e., piecewise linear phase) are considered. It is shown analytically and numerically that, for finite times, regions of arbitrarily high genus can be produced; asymptotically with time, however, the solution can be divided into expanding regions which are either of genus-zero, genus-one, or genus-two type, their precise arrangement depending on the specifics of the initial datum given. This behavior should be compared to that of the Korteweg-de Vries equation, where the solution is divided into regions which are either genus-zero or genus-one asymptotically. Finally, the potential application of these results to the generation of short optical pulses is discussed: The method proposed takes advantage of nonlinear compression via appropriate frequency modulation, and allows control of both the pulse amplitude and its width, as well as the distance along the fiber at which the pulse is produced     

Distributed feedback multipeak laser emission in Rhodamine 6G doped organic-inorganic hybrids

Organic-inorganic hybrid materials were prepared from an ureasil precursor (ureapropyltriethoxysilane designated as UPTES) and acrylic acid modified zirconium (IV) n-propoxide. Thin films containing rhodamine 6G (Rh6G) were prepared by spin-coating on glass substrates with different Zr:Si molar ratios (Zr:Si = 75:25, 50:50 and 25:75). Refractive index, thickness, number of propagating modes and attenuation coefficient were measured at 543.5, 632.8 and 1550 nm wavelengths by the prism coupling technique. Distributed feedback (DFB) laser effect was observed and studied as a function of films thickness and refractive index.     

On the Density-Density Critical Indices¶in Interacting Fermi Systems

The behaviour of correlation functions of d=1$ interacting fermionic systems is determined by a small number of critical indices. We prove that one of them is exactly zero. As a consequence, the behavior of the Fourier transform of the density-density correlation at zero momentum is qualitatively unaffected by the interaction, contrary to what happens at , if is the Fermi momentum. The result is obtained by implementing Ward identities in a Renormalization Group approach. Received: 12 November 2001 / Accepted: 25 February 2002?Published online: 2 October 2002     

The study and applications of photochemical-dynamical gravity wave model II

A nonlinear, compressible, non-isothermal gravity wave model that involves photochemistry is used to study the effects of gravity wave on atmospheric chemical species distributions in this paper. The changes in the distributions of oxygen compound and hydrogen compound density induced by gravity wave propagation are simulated. The results indicate that when a gravity wave propagates through a mesopause region, even if it does not break, it can influence the background distributions of chemical species. The effect of gravity wave on chemical species at night is larger than in daytime.     

Relationship between chemical bond parameters and superconducting temperature in HgBa2Can−1CunO2n+2+δ (n=1, 2, 3, 4)

Bond covalency and valence of elements in HgBa₂Ca_n−1Cu_nO_2n+2+δ (n=1, 2, 3, 4) were calculated and their relationship with T_c was discussed. For both oxygen and argon annealed samples, the results indicated that with the increase of n, the trend of bond covalency of Hg-O and Cu-O was the same or opposite compared with that of superconducting temperature. This may suggest that the magnitudes of Cu-O and Hg-O bond covalency are important in governing the superconducting temperature. For the highest T_c sample, Hg had the lowest valence, implying that lower valence of Hg was preferred in order to produce higher T_c. For fixed n, the valence of Cu in oxygen annealed samples was larger than that in argon annealed samples, indicating that oxygen annealed samples produced more carriers than argon annealed samples.     

Linear nonstationary optical dimensional resonances in atomic nanostructures

The existence of linear nonstationary optical resonances in a diatomic nanostructural object with a dipole-dipole atomic interaction has been proved. A new solution to the joint system of modified Bloch optical equations and nonlocal field equations is obtained for time intervals much shorter than the times of phase and energy relaxation. Formulas for effective polarizabilities of the object’s atoms, which have a set of dimensional resonances, are derived. The frequencies of these resonances significantly differ from the eigenfrequencies of the object’s atoms, and their properties depend on the interatomic distance, light-pulse duration, initial atomic inversions, and the orientation of the object’s axis relative to the direction of incidence of the external light wave.     

DISCRETE HUYGENS' MODELLING APPROACH TO WAVE PROPAGATIONS IN A HOMOGENEOUS ELASTIC FIELD

The application of the discrete Huygens' modelling has been discussed for acoustic wave propagation problems, in which the scalar wave field problems have been focused. The present paper extends the application of the modelling to the elastic wave propagation in a homogeneous elastic medium in which two types of waves, the longitudinal wave and the shear wave, are independent except at the boundary. Each wave can be treated like a scalar wave until the two waves reach the boundary where they couple so as to satisfy the displacement or stress boundary condition. We propose the approach confining ourselves to the two-dimensional field. Some examples are demonstrated, whose solutions are compared with the vectorial wave modelling and finite difference modelling solutions whenever they are available.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Radiation of a charge moving over the diffraction grating

The states of a charged particle with a finite free path are determined in the field of a resonant electromagnetic wave. The exact resonance conditions, the modulation and beam instability mechanisms, the charge and current densities (Ohm's law) are obtained for the collisionless beam of resonance particles. Quantum theory of radiation is developed for the resonant adiabatic interaction between a particle and a wave taking into account the interaction with a constant magnetic field induced at the grating surface by the charge and nonresonant waves. The radiation power, the spectrum, and the range of generated frequencies are determined. The results obtained can be used in the plasma and solid-state theories and in electronics.