Analysis of acyclovir by high performance capillary electrophoresis with on-column amperometric detection

The separation of acyclovir (ACV) by high performance capillary electrophoresis (HPCE) with on-column amperometric detection using alpha-amino-5-mercapto-3,4-dithiazole (AMD) as internal standard is described. The calibration line was linear in the range of 0.5-20 mg/L of ACV. The detection limit was 0.15 mg/L of ACV. Its recovery ranged from 98 to 101% with relative standard deviations (RSDs) from 1.9 to 3.2% (n = 5). This method was successfully used for determining ACV in some pharmaceuticals and human urine. Comparable results with HPCE with ultraviolet (UV) detection and amperometric detection were obtained.     

Amperometric biosensor for ethanol based on immobilization of alcohol dehydrogenase on a nickel hexacyanoferrate modified microband gold electrode

Alcohol dehydrogenase (ADH) has been immobilized on a nickel hexacyanoferrate modified microband gold electrode surface by a glutaraldehyde/bovine serum albumin (BSA) cross-linking procedure to provide a new amperometric sensor for the assay of ethanol. The resulting enzyme electrode exhibits excellent electrocatalysis for the oxidation of reduced nicotinamide-adenine dinucleotide (NADH). The amperometric determination is based on the electrochemical detection of NADH which is generated in the enzymatic reaction of ethanol with NAD(+) under catalysis of ADH. The influence of various experimental conditions was examined for the determination of the optimum analytical performance. The sensor responds rapidly to ethanol with a detection limit of (5.0 +/- 0.3) x 10(-7) mol 1(-1). The response current increases linearly with ethanol concentration up to 5 mmol 1(-1). The sensor remains relatively stable for about 1 week.     

Natural and fallout radionuclide concentrations in the environment of Islamabad

A study on the concentration of natural and fallout radionuclides in environmental samples collected from different localities of Islamabad was performed. For the determination of gamma-emitters such as ²³⁸U, ²³²Th, ⁴⁰K and ¹³⁷Cs high purity germanium (HPGe) detector was used while for the analysis of ⁹⁰Sr, a beta-emitter, liquid scintillation counting system was used. The indoor absorbed dose rate was measured by a CaF₂ : Dy thermoluminescence detector. Other radiation parameters were also determined to evaluate the radiation hazard. All the results were well within the permissible limits showing that there is no radiation hazard in the environment of Islamabad.     

Z/E-photoisomerizations of olefins with 4npi- or (4n + 2)pi-electron substituents: zigzag variations in olefin properties along the T(1) state energy surfaces

[Figure: see text]. A quantum chemical study has been performed to assess changes in aromaticity along the T1 state Z/E-isomerization pathways of annulenyl-substituted olefins. It is argued that the point on the T1 energy surface with highest substituent aromaticity corresponds to the minimum. According to Baird (J. Am. Chem. Soc. 1972, 94, 4941), aromaticity and antiaromaticity are interchanged when going from S0 to T1. Thus, olefins with S0 aromatic substituents (set A olefins) will be partially antiaromatic in T1 and vice versa for olefins with S0 antiaromatic substituents (set B olefins). Twist of the C=C bond to a structure with a perpendicular orientation of the 2p(C) orbitals (3p*) in T1 should lead to regaining substituent aromaticity in set A and loss of aromaticity in set B olefins. This hypothesis is verified through quantum chemical calculations of T1 energies, geometries (bond lengths and harmonic oscillator measure of aromaticity), spin densities, and nucleus independent chemical shifts whose differences along the T1 PES display zigzag dependencies on the number of -electrons in the annulenyl substituent of the olefin. Aromaticity changes are reflected in the profiles of the T1 potential energy surfaces (T1 PESs) for Z/E-isomerizations because olefins in set A have minima at 3p* whereas those in set B have maxima at such structures. The proper combination (fusion) of the substituents of set A and B olefins could allow for design of novel optical switch compounds that isomerize adiabatically with high isomerization quantum yields.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

HPLC-NMR of fatty alcohol ethoxylates

The application of HPLC-NMR for the analysis of a mixture of fatty alcohol ethoxylates (FAEs) is described. The use of the new generation, cryogenically cooled probes is investigated in respect of the sensitivity advantage that they provide. The FAE mixture is separated using liquid chromatography at the critical point of adsorption. The ability of the method to differentiate between the different end groups and the degree of polymerization of the mixture constituents is investigated. Both on-flow and stop-flow HPLC-NMR techniques were used together with two-dimensional NMR spectroscopy. The results are compared with those obtained by using an evaporative light scattering detector for the HPLC.     

Moclobemide-selective membrane electrode and its pharmaceutical applications

A liquid membrane electrode prepared with moclobemide-dipicrylamine ion-pair complex, dissolved in nitrobenzene as solvent, was studied for analytical performance. The linear response covers the range 10(-3)-10(-6) M moclobemide solution, with a slope of 50.7 mV decade(-1) (pH range 3.5-8). The detection limit is 3 x 10(-7) M. The electrode shows stability, good reproducibility and fast response. The selectivity of the electrode is good. There are two important interfering ions: mianserin and thiamine (Vitamin B(1)). The compression excipients (such as Mg(2+), starch, talcum powder) do not interfere. These characteristics of the electrode enabled it to be used for the determination of moclobemide in drugs and as an active substance, via indirect and direct potentiometric methods. Via an indirect potentiometric method moclobemide, as an active substance, can be determined with an average recovery of 99.96% and a relative standard deviation of 0.85%, and this method can also be used for its determination in drugs with a relative standard deviation of < 2%. The electrode is useful for the determination of the dissolution rate of moclobemide tablets. The physical processes are numerically simulated by typical equations. The apparent first-order rate constants for disintegration and dissolution were calculated.     

Microwave-accelerated derivatization processes for the determination of phenolic acids by gas chromatography-mass spectrometry

A rapid method for the derivatization of phenolic antioxidants using microwave irradiation has been developed. Six antioxidatively active phenolic components of wines and fruits, namely gallic acid, gentisic acid, vanillic acid, caffeic acid, ferulic acid and p-coumaric acid were used in the model study. The solution of phenolic acids was evaporated to dryness on a rotary evaporator followed by further drying under microwave irradiation (600 W, 30 s). The resultant residue was dissolved in pyridene and treated with bis(trimethylsilyl)acetamide while irradiated by microwave using high power for 30 s. Controlled reaction was carried out employing bis(trimethylsilyl)trifluoroacetamide under conventional heating for 30 min. The trimethylsilyl derivatives were identified and quantified on a gas chromatography/mass selective detector. The mass spectral fragmentation patterns of the derivatives obtained by microwave irradiation were identical to those prepared by heating. The yields of microwave-assisted silylation were comparable to those from conventional heating. The rsd were less than 8% for six replicates. The linearity in wine matrix was nearly perfect. This method is a useful protocol to examine the phenolic constituents in wines and agricultural products.