Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

The effect of amino acid deletions and substitutions in the longest loop of GFP

Background  

The effect of single and multiple amino acid substitutions in the green fluorescent protein (GFP) from Aequorea victoria has been extensively explored, yielding several proteins of diverse spectral properties. However, the role of amino acid deletions in this protein -as with most proteins- is still unknown, due to the technical difficulties involved in generating combinatorial in-phase amino acid deletions on a target region.     

The growth of perylene on Ru(0001)

The structure of perylene adsorbed on Ru(0001) surface has been studied by ultraviolet photoemission spectroscopy (UPS) and low-energy electron diffraction. An ordered p(4x4) structure is observed from a monolayer (about 4 A thickness) of the perylene on Ru(0001) surface. UPS measurements show the molecular features, from the perylene multiplayer, between 2 and 10 eV below the Fermi level. Angle-resolved ultraviolet photoemission spectroscopy measurements suggest that the perylene molecular plane is parallel to the substrate. Temperature dependent UPS measurements show that the perylene multilayer is stable on Ru(0001) surface up to 125 degrees C. The desorption of the multilayer and the decomposition of the monolayer are observed above 125 degrees C.     

Evaluation of Transient Absorption Spectra of N, N, N′, N′- Tetra - ( p -methylphenyl ) - 4, 4′- diamino - 1, 1′- diphenyl Ether ( TPDAE ) for Electron Transfer from TPDAE to Fullerenes ( C60 / C70 ) by Laser Flash Photolysis

Photoinduced electron transfer processes between fullerenes (C60 / C70) and N, N, N′, N′- tetra - ( p-methylphenyl ) - 4, 4′- diamino - 1, 1′- diphenyl ether ( TPDAE ) have been studied by nanosecond laser flash photolysis. Quantum yields and rate constants of electron transfer from TPDAE to excited triplet state of fullerenes (C60 / C70 ) in benzonitrile have been evaluated by observing the transient absorption bands in the near-IR region where the excited triplet state, radical anion of fullerenes ( C60 / C70 ) and radical cations of TPDAE appear.     

Water Activities, Osmotic and Activity Coefficients and Some Correlation of Aqueous Mixtures of Alkaline-Earth and Ammonium Nitrates, NH4NO3-Y(NO3)2-H2O with Y ≡ Ba2+, Mg2+ and Ca2+ at T = 25 °C

The thermodynamic properties of the mixed aqueous electrolyte of ammonium and alkaline earth metal nitrates have been studied using the hygrometric method at 25?°C. The water activities of these {yNH₄NO₃+(1?y)Y(NO₃)₂}(aq) systems with Y ≡ Ba²⁺, Mg²⁺ and Ca²⁺ were measured at total molalities ranging from 0.10 mol?kg^?1 to saturation for different NH₄NO₃ ionic-strength fractions of y=0.20, 0.50 and 0.80. These data allow the calculation of osmotic coefficients. From these measurements, the ionic mixing parameters are determined and used to calculate the solute activity coefficients in the mixtures at different ionic-strength fractions. The results of these ternary solution measurements are compared with those for binary solutions of the alkaline earth nitrates of magnesium, calcium and barium with ammonium nitrates. The behavior of the aqueous electrolyte solutions containing mixtures of barium or calcium or magnesium with ammonium nitrates are correlated and show that ionic interactions are more important for the system containing Mg²⁺ than for Ca²⁺ or Ba²⁺. The trends are mainly due to the effects of the ionic size, polarizability and the hydration of the ions in these solutions.     

6‐Aza‐2′‐deoxy­uridine and N3‐anisoyl‐6‐aza‐2′‐deoxy­uridine

In 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (6‐aza‐2′‐deoxy­uridine), C₈H₁₁N₃O₅, (I), the conformation of the glycosylic bond is between anti and high‐anti [χ = −94.0 (3)°], whereas the derivative 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐N⁴‐(2‐methoxy­benzoyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (N³‐anisoyl‐6‐aza‐2′‐deoxy­uridine), C₁₆H₁₇N₃O₇, (II), displays a high‐anti conformation [χ = −86.4 (3)°]. The furanosyl moiety in (I) adopts the S‐type sugar pucker (²T₃), with P = 188.1 (2)° and τ_m = 40.3 (2)°, while the sugar pucker in (II) is N (³T₄), with P = 36.1 (3)° and τ_m = 33.5 (2)°. The crystal structures of (I) and (II) are stabilized by inter­molecular N—H⋯O and O—H⋯O inter­actions.     

聚合物在碳纤维表面的电沉积

用电沉积方法将苯乙烯-马来酸酐、乙酸乙烯酯-马来酸酐、甲基丙烯酸甲酯-马来酸酐共聚物沉积于碳纤维表面。通过实验初步证实了此过程的负离子-自由基机理,以及沉积层在纤维表面的物理粘附。由于电沉积的聚合物中间层改善了碳纤维增强塑料中纤维-基体树脂间的界面粘接作用,使原来的剪切破坏基本上发生于界面的情况转变成发生于基体本身为主。并将单向碳纤维增强环氧树脂复合材料的层间剪切强度,由原来的600kg/cm~2左右提高到1000kg/cm~2以上,经沸水浸泡100小时后的强度损失也减少了。