Hydrothermal synthesis and photoluminescent properties of stacked indium sulfide superstructures

Unusual hierarchical stacked superstructures of cubic beta-In2S3 were fabricated via a facile hydrothermal process in the presence of a surfactant cetyltrimethylammonium bromide CTAB; the 3D superstructures were developed by helical propagation of surface steps from microflakes of 10-20 nm thickness.     

Direct Ab Initio Dynamics Study on the Reaction of CH3CHF2 (HFC‐152a) with the Cl Atom

A direct ab initio dynamics method is used to investigate the hydrogen‐abstraction reaction CH₃CHF₂+Cl. One transition state is located for α‐H abstraction, and two are identified for β‐H abstraction. The potential‐energy surface (PES) is obtained at the G3(MP2)//MP2/6‐311G(d, p) level. Furthermore, the rate constants of the three channels are evaluated by using canonical variational transition‐state theory (CVT) with small‐curvature tunneling (SCT) contributions over a wide temperature range of 200–2500 K. The dynamic calculations show that the reaction proceeds mainly by α‐H abstraction over the whole temperature range. The calculated rate constants and branching ratios are both in good agreement with the available experimental values.     

An automatic and quantitative on-chip cell migration assay using self-assembled monolayers combined with real-time cellular impedance sensing

Cell migration is crucial in many physiological and pathological processes including embryonic development, immune response and cancer metastasis. Traditional methods for cell migration detection such as wound healing assay usually involve physical scraping of a cell monolayer followed by an optical observation of cell movement. However, these methods require hand-operation with low repeatability. Moreover, it's a qualitative observation not a quantitative measurement, which is hard to scale up to a high-throughput manner. In this article, a novel and reliable on-chip cell migration detection method integrating surface chemical modification of gold electrodes using self-assembled monolayers (SAMs) and real-time cellular impedance sensing is presented. The SAMs are used to inhibit cell adherence forming an area devoid of cells, which could effectively mimic wounds in a cell monolayer. After a DC electrical signal was applied, the SAMs were desorbed from the electrodes and cells started to migrate. The process of cell migration was monitored by real-time impedance sensing. This demonstrates the first occurrence of integrating cellular impedance sensing and wound-forming with SAMs, which makes cell migration assay being real-time, quantitative and fully automatic. We believe this method could be used for high-throughput anti-migratory drug screening and drug discovery.     

Structural transformation of LiVOPO4 to Li3V2(PO4)3 with enhanced capacity

In the present investigation, we report the transformation of alpha-LiVOPO 4 to alpha-Li 3V 2(PO 4) 3, leading to an enhancement of capacity. The alpha-LiVOPO 4 sample was synthesized by a sol-gel method, followed by sintering at 550-650 degrees C in a flow of 5% H 2/Ar. The structural transformation of a triclinic alpha-LiVOPO 4 structure to a monoclinic alpha-Li 3V 2(PO 4) 3 structure was observed at higher sintering temperatures (700-800 degrees C in a flow of 5% H 2/Ar). The alpha-Li 3V 2(PO 4) 3 phase was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis, and X-ray absorption near edge spectrum (XANES) techniques. The valence shift of vanadium ions from +4 to +3 states was observed using in situ XANES experiments at V K-edge. The structural transformation is ascertained by the shape changes in pre-edge and near edge area of X-ray absorption spectrum. It was observed that the capacity was enhanced from 140 mAh/g to 164 mAh/g via structural transformation process of LiVOPO 4 to Li 3V 2(PO 4) 3.     

Synthesis of 2S-(2-hydroxyethyl)-3R-hydroxy-4S-(thymin-1-yl or adenin-9-yl)-tetrahydrofuran

Two synthetic strategies were developed to obtain isonucleosides 2a and 2b. Starting from the known compound 4, an extension of one carbon unit at sugar 6-terminal was achieved by Wittig reaction and Stannyl-desulfonylation reaction. After oxidation of the double bond, the isonucleosides with elongated side chain 2a and 2b were synthesized. For the synthesis of isonucleosides containing different bases, an epoxide intermediate approach was developed. Isonucleosides 2a and 2b were synthesized by regioselective epoxide opening reaction of 18 in good yield.     

Photoelectron spectroscopy of anions at 118.2 nm: observation of high electron binding energies in superhalogens MCl4- (M=Sc, Y, La)

High energy photon is needed for photoelectron spectroscopy (PES) of anions with high electron binding energies, such as superhalogens and O-rich metal oxide clusters. The highest energy photon used for anion PES in the laboratory has been 157 nm (7.866 eV) from F2 eximer lasers. Here, we report an anion PES experiment using coherent vacuum ultraviolet radiation at 118.2 nm (10.488 eV) by tripling the third harmonic output (355 nm) of a Nd:YAG laser in a XeAr cell. Our study focuses on a set of superhalogen species, MCl(4) (-) (M=Sc, Y, La), which were expected to possess very high electron binding energies. While the 157 nm photon can only access the ground state detachment features for these species, more transitions to the excited states at binding energies higher than 8 eV are observed at 118.2 nm. The adiabatic detachment energies are shown to be, 6.84, 7.02, and 7.03 eV for ScCl(4) (-), YCl(4) (-), and LaCl(4) (-) eV, respectively, whereas their corresponding vertical detachment energies are measured to be 7.14, 7.31, and 7.38 eV.     

Adsorption of bulky molecules of nonylphenol ethoxylate on ordered mesoporous carbons

Ordered mesoporous carbons (OMCs) with varying pore sizes were prepared using ordered mesoporous silica SBA-15 as hard templates. The OMCs possess abundant mesopores with narrow pore size distribution, on which the adsorption behavior of bulky molecules of nonylphenol ethoxylate (NPE) were investigated. The isotherms of NPE on OMCs can be fitted by Langmuir adsorption model, evidenced by the adsorption data. The surface area of the pores larger than 1.5 nm is a crucial factor to the adsorption capacity of NPE, whereas the most probable pore diameter of OMCs is crucial to the adsorption rate of NPE. The adsorption temperature has more significant effects on adsorption rate than the adsorption capacity. Theoretical studies show that the adsorption kinetics of NPE on OMCs can be depicted with the pseudo-second-order kinetic model. In addition, thermodynamic parameters of adsorption were evaluated based on the equilibrium constants related to the equilibrium of adsorption at different temperatures.     

Studies on the magnetism of cobalt ferrite nanocrystals synthesized by hydrothermal method

Fe-Co/CoFe₂O₄ nanocomposite and CoFe₂O₄ nanopowders were prepared by the hydrothermal method. The structure of magnetic powders were characterized by X-ray diffraction diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermal gravity analysis (TGA) and differential thermal analysis (DTA) analysis, X-ray photoelectron spectrometry (XPS), and Fourier transform infrared spectra (FTIR) techniques, while magnetic properties were determined by using a vibrating sample magnetometer (VSM) at room temperature. The effects of hydrothermal reaction conditions on magnetic properties were also discussed in details. The values of saturation magnetization (M_s) and coercive fore (H_c) for Fe-Co/CoFe₂O₄ nanocomposite are 113 emu/g and 1.4 kOe, respectively. Furthermore, CoFe₂O₄ ferrite with a single-domain critical size of 70 nm was fabricated by controlling the hydrothermal reaction conditions carefully, which presents high coercive force (ca. 4.6 kOe) and high squareness ratio (ca. 0.65). One interesting thing is M_s value of CoFe₂O₄ ferrite with a diameter of 40 nm is 86 emu/g which is comparable to that of the bulk counterpart.     

A modified polymethylsilane as the precursor for ceramic matrix composites

A novel SiC precursor, A-PMS, was synthesized through a reaction of polymethylsilane (PMS) with SbCl₃, where the Si-H in PMS reacts with Sb-Cl to form Si-Sb bond with HCl evaporated. A-PMS was used as a precursor to prepare C_f/SiC ceramic matrix composites (CMCs) via polymer infiltration and pyrolysis (PIP) process. It is evident that SbCl₃ plays a very important role in promoting chain crosslinking, transforming of the Si-Si into Si-C bonds and stabilizing PMS from very high oxidation trend of the active Si-H bonds. A-PMS keeps liquid at room temperature that is suitable for the infiltration in the absence of any solvent. A-PMS can be cured into a fully crosslinked structure at 320 °C that leads to a very high ceramic yield up to 91% and an Si/C ratio near 1.12 after pyrolysis. The resulted CMCs samples reached a density of 1.76 g cm⁻³ and a flexural strength of 381 MPa after only four infiltration-pyrolysis cycles.