双金属氰化物络合物催化环氧烷烃开环聚合的特征

合成了Co Zn双金属氰化物 (DMC)络合物催化剂 ,以X 射线衍射、元素分析、红外光谱等手段进行了表征 ,考察了该催化体系下环氧丙烷开环聚合的反应特性 ,并初步探讨了聚合反应的机理 .研究发现 ,Co Zn双金属氰化物催化剂具有很高的催化活性 ,适合于中高分子量聚醚的合成 ,但是碱性起始剂起阻聚作用 ;在该催化体系下聚合物分子量可控 ,不饱和度很低 (<0 .0 14meq g) ,分批加料聚合所得到的聚合物分子量分布较窄 (Mn Mw <1.4 ) ,而一步加料聚合所得到的聚合物分子量分布变宽 ;1 3C NMR分析表明聚合物主链具有无规立构分布的特点 ,且链节分布几乎都为头 尾方式 .聚合过程中活性链与非活性链之间可能存在一个交换反应 ;虽然聚合反应有终止 ,但与聚合物链长没有关系 ,聚合物链的终止是可逆的 .     

NMR SPECTROSCOPIC STUDY ON COPOLYMER OF ETHYLENE-NORBORNENE

A series of ethylene-norbornene copolymers were synthesised using VO (OEt) Cl_2/Al_2Et_3Cl_3 catalytic system and their structure was characterized by ~1H-NMR, ~1H-~1HCOSY NMR and ~(13)C-NMR. Assignments of NMR spectra were given and discussed indetail.     

四甲基对联苯二胺光敏化聚苯乙烯砜及其模型化合物二苄基砜分解机理的研究

N、N、 N’、N’-四平基对联苯二胺(NTMB)和 3、3’、5、5’-四甲基对联苯二胺(TMB)可以有效地光敏化二苄基砜(DBS)分解和聚苯乙烯砜(PSS)降解。敏化作用是按电子转移机理进行的,电子转移过程可以由NTMB的单重激发态,也可以由三重激发态发生。由三重态电子转移产生的三重态离子自由基对进一步反应生成产物的效率比单重态离子自由基对的效率高10倍。     

非对称碰撞约束下形状记忆合金梁的随机响应与分岔

形状记忆合金(SMA)是二十一世纪具有形状记忆效应的新型智能材料.针对具有非对称约束的SMA梁,本文构造了碰撞振动系统.在无碰撞和有碰撞两种情况下,利用随机平均法给出了近似解析结果.数值模拟作为验证解析结果的工具.结果表明,系统能量的概率响应曲线具有非光滑特性.当约束位置发生变化时,系统会出现随机P分岔和D分岔.     

Quantitative determination of usnic acid in Usnea lichen and its products by reversed-phase liquid chromatography with photodiode array detector

Usnic acid, a lichen substance, has a wide range of pharmaceutical applications, including antibiotic, antimycotic, antifeedant, antitubercular, antitumor, and analgesic activities. Some products containing usnic acid are marketed as weight control supplements; however, hepatotoxicity and acute liver failures were reported as severe side effects. The usnic acid content present in the plant materials and market products was analyzed by reversed-phase high-pressure liquid chromatography with a photodiode array detector at 233 nm. A Waters XTerra RP18 (150 x 4.6 mm; 5 microm particle size) column was the stationary phase; mobile phase was aqueous 0.1% acetic acid and acetonitrile gradient at flow rate of 1.0 mL/min. The temperature was held constant at 30 degrees C. The retention time of usnic acid was approximately 13.3 min. Acetone extraction of the samples took place with sonication. The precision of the method was confirmed by a standard deviation below 3.0% (n=3) and usnic acid recovery was 99.0%. Limit of detection was 0.4 microg/mL and the response was linear from 1.4 to 570.0 microg/mL with a correlation coefficient (R2) of 0.9991. The content of usnic acid in 4 raw materials and 22 finished products was analyzed.     

高效液相色谱氮杂冠醚键合固定相的合成及性能研究

我们曾用γ－氯丙基键合硅胶（ＣＰＳ），在氢化钠（ＮａＨ）作用下合成了３－（氮杂－１８－冠－６）丙基键合固定相（ＢＣＰ）［１］．该固定相对碱基、核苷酸、硝基苯酚等有较好的分离选择性，但由于ＮａＨ对硅胶基质腐蚀作用较大，导致ＢＣＰ柱效及渗透性较低．本文采...     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

K＋I~2→K^+＋I~2^-离子对生成反应态－态几率与 选态截面的量子散射理论研 究

本文用Miller的-矩阵变分法在Aten-Lanting-Los两态势能面上计算了K＋I~2→K^+＋I~2^-电离反应的态－态几率和选态反应截面,结果表明了低电离阈能、几率的振荡行为及振动增强效应;电离截面随碰撞能及I~2振动量子数的变化规律与实验预测相吻合;讨论了反应机理。     

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.     

STUDIES ON CHARGE TRANSFER POLYMERIZATION——POLYMERIZATION OF ACRYLONITRILE INITIATED WITH PHENYL HYDRAZINE AND ITS DERIVATIVES

The photopolymerization of acrylonitrile (AN) initiated with phenyl hydrazine (PHZ) and its derivatives has been studied. The initiator exponent and monomer exponent were determined from the kinetic investigation to be 0.66th and 2.1th respectively and the overall activation energy was 33.4KJ/mol for the PHZ-AN system. Spectral analysis and other data indicate that a charge transfer complex between PHZ as a donor and AN as an aceeptor is formed. The initiation mechanism was proposed.