厚度对光聚物高密度全息存储记录参量的影响

本文用实验方法研究了光致聚合物的曝光时间常量、曝光能量常量、动态范围、曝光灵敏度和折射率调制度等高密度全息存储参量随样品厚度的变化规律,结果表明随着样品厚度的增加,曝光能量常量、曝光时间常量及材料的动态范围也增加,但材料的曝光灵敏度却减小,而折射率调制度却没有明显的变化规律.     

GaAs光电阴极片原子级表面清洁方法的研究及评价

本文对GaAs光电阴极片UHV系统中原子级表面清洁方法做了研究,它们是:光加热法、直接加热法、离子轰击加退火法、热子加热法,表面清洁效果用装于UHV系统中间在线俄歇检测,表面质量用Aa/GaAuger峰高进行比较,指出两种用于第三代象增强器光电阴极的表面清洁方法:CS-离子轰击加退火法和热子背加热法。     

相变域硅薄膜材料的光稳定性

采用RF-PECVD技术，通过改变反应气体的硅烷浓度制备了一系列不同晶化率不掺杂的硅薄膜材料，研究了工艺变化对材料结构的影响及材料光电特性同微结构的关系.随后进行了光衰退试验，在分析光照前后光电特性变化规律的基础上，认为材料中的非晶成分是导致材料光电特性衰退的主要原因.在靠近过渡区非晶一侧的硅材料比普通非晶硅稳定，衰退率较少；高晶化率微晶硅材料性能稳定，基本不存在光衰退；在靠近过渡区微晶一侧的硅材料虽然不是完全不衰退，但相比高晶化率硅材料来说更适合制备高效微晶硅电池. 关键词： 射频等离子体增强化学气相沉积 硅薄膜 Staebler-Wronski(SW)效应 稳定性     

轻核中中子间的对相互作用和中子晕

选择Skyme势E作为两核子间唯象相互作用,在Hartree-Fock理论中结合粒子数守恒方法处理同类核子间的对相互作用,计算了Li和Be的丰中子同位素的结构,计算表明中子间的对相互作用和双中子晕之间存在紧密的联系.     

一种反光发光复合标牌材料的研究

反光发光复合标牌,不仅能将光源方向的入射光线回归反射向光源方向,具有反光特性.还能将光源中大量的红外光转换成可见光,具有发光特性.从而使标牌的亮度和可视距离得到提高.     

A modified trust region method with Beale’s PCG technique for optimization

It is well-known that the conjugate gradient method is widely used for solving large scale optimization problems. In this paper a modified trust-region method with Beale’s Preconditioned Conjugate Gradient (BPCG) technique is developed for solving unconstrained optimization problems. The modified version adopts an adaptive rule and retains some useful information when an unsuccessful iteration occurs, and therefore improves the efficiency of the method. The behavior and the convergence properties are discussed. Some numerical experiments are reported. This work was partially supported by Grant of the National Natural Science Foundation of China, Grant: 20040319003 of the Doctoral Site of the Education Ministry of China, and SRG: 7001428 of City University of Hong Kong.     

Entanglement correlation in mixed states for anharmonic vibrations in ozone

Entanglement dynamics of anharmonic vibrations in molecule O₃ is studied in terms of the linear entropy and negativity with various initial states that are, respectively, taken to be the mixed density matrices of coherent states on each normal mode. It is shown that with a suitable parameter in initial states, the entropy in one mode can be positively correlated or anti-correlated with negativity. The behavior of correlation between two entropies for two modes, negativity, and mutual entropy is discussed as well.     

Highly sensitive and interference-free determination of bismuth in environmental samples by electrothermal vaporization atomic fluorescence spectrometry after hydride trapping on iridium-coated tungsten coil

Bismuthine was on-line trapped on tungsten coil and subsequently electrothermally vaporized for the determination by atomic fluorescence spectrometry (AFS). Several noble metals, including Pd, Rh, Pt, and Ir, were explored as permanent chemical modifier for tungsten coil on-line trapping. Investigation showed that Ir gave the best performance, in which bismuthine was on-line trapped on Ir-coated tungsten coil at 560 °C, and then released at 1550 °C for subsequent transfer to AFS by a mixture of Ar and H₂. Under optimum instrumental conditions, the trapping efficiency was found to be 73 ± 3%. With 120 s (12 mL sample volume) trapping time, a limit of detection (LOD) of 4 ng L^− 1 was obtained, compared to conventional hydride generation AFS (0.09 μg L^− 1); the LOD can be lowered down to 1 ng L^− 1 by increasing the trapping time to 480 s. The LOD was found to be better or at least comparable to literature levels involving on-line trapping and some other sophisticated instrumental methods such as ICP-MS and GF-AAS. A comprehensive interference study involving conventional hydride-forming elements and some transition metals was carried out, and the result showed that the gas phase interference from other hydride-forming elements was largely reduced, thanks to the use of on-line tungsten coil trapping. Finally, the proposed method was applied to the determination of bismuth in several biological and environmental standard reference materials, and a t-test shows that the analytical results by the proposed method have no significant difference from the certified values at the confidence level of 95%.