基于G-四链体-氯化血红素DNA酶比色法测定银离子和汞离子传感器的构筑

利用G-四链体DNA(5′-CTGGGAGGGAGGGAGGGA-3′)与氯化血红素结合形成G-四链体-Hemin DNA酶,其能高效催化H_2O_2氧化反应底物由无色变为绿色,当溶液中有Ag~+或Hg~(2+)存在时会阻碍该DNA酶的形成,导致绿色溶液变浅。基于此,建立了比色法测定Ag~+和Hg~(2+)的传感器。在最佳实验条件下,溶液的吸光度与Ag~+和Hg~(2+)浓度分别在100.0～1 000.0 nmol/L和80.0～800.0 nmol/L范围内具有良好的线性关系,检出限(3δ/Slope)分别为55.9 nmol/L和64.3 nmol/L。该方法具有较好的选择性,采用该方法对实际样品进行测试,结果满意。     

Isolation and purification of flavonoid glycosides from Trollius ledebouri using high-speed counter-current chromatography by stepwise increasing the flow-rate of the mobile phase

Three flavonoid glycosides including orientin, vitexin, quercetin-3-O-neohesperidoside and one unknown compound were isolated and purified by high-speed counter-current chromatography (HSCCC) and semi-preparative HPLC from Trollius ledebouri Reichb., a traditional Chinese medicine. Preparative HSCCC with a two-phase solvent system composed of ethyl acetate-n-butanol-water (2:1:3, v/v/v) was successfully performed by increasing the flow-rate of the mobile phase from 1.5 to 2.5 ml/min after 190 min. Consequently, 95.8 mg orientin, 11.6 mg vitexin, 9.3 mg unknown compound with purities of over 97% and one partially purified peak fraction (contained quercetin-3-O-neohesperidoside at 85.1% purity) were obtained from 500 mg of the crude extract. Then the partially purified fraction was further purified by reversed-phase semi-preparative high-performance liquid chromatography. The structure identification of all pure fractions was carried out by UV, MS, 1H NMR and 13C NMR.     

微波衍生-离子对高效液相-磺化四苯基卟啉光度法同时测定痕量镍、铜、锰和锌

 用磺化四苯基卟啉 (TPPS4 )作柱前衍生试剂 ,在微波作用下进行衍生反应 ,研究了衍生和分离Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的最佳条件。在 75 0W的微波作用下衍生反应 3min ,在C18柱上采用乙腈 水 (体积比为 2 2 5∶77 5 )体系作流动相 ,四乙基溴化铵 (TEABr)作离子对试剂 ,在 415nm处检测 ,建立了微波衍生 离子对高效液相快速分离、光度检测Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的新方法。络合物和反应试剂在 15min内出峰完毕。Zn2 + ,Cu2 + ,Ni2 + 和Mn2 + 的检测限分别为 0 0 5 μg/L ,0 0 1μg/L ,0 10 μg/L和 0 40 μg/L。     

金属—血清白蛋白的结构研究——Ⅵ.等离子点附近HSA和BSA中Cu(Ⅱ)和Ni(Ⅱ)金属中心的结构

本文用紫外光谱研究了等离子点附近HSA或BSA ¹Cu(Ⅱ)或Ni(Ⅱ)金属中心的结构。结果表明:在pH₄.0～5.3时,Cu(Ⅱ)—HSA配合物在低浓度时独具五配位的四方锥构型,高浓度时(>10^-4mol·l^-1)为四配位的四方平面构型,Cu(Ⅱ)—BSA、Ni(Ⅱ)—BSA在上述pH范围内均只存在四方平面构型。Cu(Ⅱ)、Ni(Ⅱ)结合位置与生理pH下的相同,均在白蛋白的N端三肽段上,与Asp^{1相似文献}   

Synthesis of new tetrazene（N-N=N-N）-linked bi（1,2,4-triazole）

The reaction of 4-amino-1,2,4-triazole with sodium dichloroisocyanurate (SDCI) afforded new tetrazene(N-N=N-N)-linked bi(1.2,4-triazole) 2a in excellent yield.Increasing the molar ratio of SDCI to 4-amino-1,2,4-triazole,the chlorinated product 1,5,5′- trichloro-4,4′-azo-1,2,4-triazole (2b) was formed.These new compounds have been characterized by MS,~1H NMR,~(13)C NMR,and elemental analysis.     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

3, 6-二取代-均三唑并[3, 4-b]-1, 3, 4-噻二唑的合成

研究了2-苯基-1, 2, 3-三唑-4-羧酸(1)与3-烷基/芳基-4-氨基-5-巯基-1, 2, 4-三唑(2a～o)在POCl~3催化下, 脱水缩合得到15个新的3-烷基/芳基-6-(2'-苯基-1', 2', 3'-三唑-4'-基)均三唑并[3,4-b]-1, 3, 4-噻二唑类化合物(3a～o)。     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Synthesis of seven-membered ring diazepin-2-ones via palladium-catalyzed highly regioselective cyclization of 2-vinylpyrrolidines with aryl isocyanates

The first palladium-catalyzed ring-expansion reaction of 2-vinylpyrrolidines with aryl isocyanates to form seven-membered ring heterocycles is described. This regioselective reaction requires 5 mol % of Pd(2)(dba)(3).CHCl(3) and 10 mol % of dppp at 40-60 degrees C in THF and results in the formation of 1,3-diazepin-2-ones in good isolated yields. When Pd(OAc)(2) and PPh(3) were utilized in the reaction, an intramolecular hydrogen migration occurs resulting in the formation of conjugated diene derivatives of urea.