基于缺陷地结构的微带低通滤波器设计

提出了一种具有宽带带外抑制的小型化微带低通滤波器。该滤波器由缺陷地结构和两阶阶跃阻抗单元结构构成。利用ANSYS HFSS建立三维全波电磁模型并仿真优化,仿真结果表明：该低通滤波器的截止频率为1.4 GHz,通带宽度为0~1.4 GHz,通带内的插入损耗小于0.5 dB,带外抑制频率范围为2.1~11 GHz,在阻带范围内的带外抑制能力接近20 dB。为验证仿真和测试结果,加工并测试了经全波电磁优化后的缺陷地结构微带低通滤波器。测试结果和仿真结果吻合得较好,证明了所提出的缺陷地结构在实现滤波器小型化和宽阻抗带宽上有着重要的作用,能够使该滤波器具有较好的低通滤波特性。     

基于B样条的TERS形貌成像背景扣除方法

在针尖增强拉曼光谱(TERS)形貌成像过程中,由于针尖与扫描台无法绝对平行、样品电子密度骤变处针尖快速升降以及扫描控制系统响应时间特性差等综合原因的影响,往往使形貌图中带有倾斜或边界面卷曲的成像背景。成像背景对样品形貌的识别和分析带来十分不利的影响,而背景扣除就是解决该问题的重要手段,也是形貌成像预处理的重要组成部分。背景扣除的原理一般是通过拟合背景的方法来扣除成像中的背景。传统的背景扣除方法是利用多项式拟合的方法对成像进行逐行的基线校正,但是该方法在处理形貌成像时常常会由于过拟合而造成样品形貌的失真,同时容易在图片上留下明显的线条纹理。针对传统方法的缺点,本文提出采用B样条曲面拟合方法,直接对样品形貌图进行曲面背景拟合,发挥B样条低阶光滑的优点,能够有效克服传统方法的缺陷。在实验中,同时利用传统方法和该方法对金单晶和合成金片的形貌图进行背景扣除,实验结果表明,两种方法都能够扣除样品形貌图中的成像背景,但与传统方法相比,所提出的方法不会造成样品形貌的失真,且不会留下线条纹理,获得了更加良好的背景扣除效果,为进一步分析样品形貌特征提供了更准确可靠的信息,是一种更加有效的TERS形貌成像背景扣除算法。     

Exploring interacting holographic dark energy in a perturbed universe with parameterized post-Friedmann approach

The model of holographic dark energy in which dark energy interacts with dark matter is investigated in this paper. In particular, we consider the interacting holographic dark energy model in the context of a perturbed universe, which was never investigated in the literature. To avoid the large-scale instability problem in the interacting dark energy cosmology, we employ the generalized version of the parameterized post-Friedmann approach to treating the dark energy perturbations in the model. We use the current observational data to constrain the model. Since the cosmological perturbations are considered in the model, we can then employ the redshift-space distortions (RSD) measurements to constrain the model, in addition to the use of the measurements of expansion history, which has never been done in the literature. We find that, for both the cases with \(Q=\beta H\rho _\mathrm{c}\) and with \(Q=\beta H_0\rho _\mathrm{c}\), the interacting holographic dark energy model is more favored by the current data, compared to the holographic dark energy model without interaction. It is also found that, with the help of the RSD data, a positive coupling \(\beta \) can be detected at the \(2.95\sigma \) statistical significance for the case of \(Q=\beta H_0\rho _\mathrm{c}\).     

Oxygen consumption and chemisorption in low-temperature oxidation of sub-bituminous pulverized coal

Studying the effect of oxygen in coal oxidation is very important for understanding and controlling coal spontaneous combustion. However, the oxygen effect is not very easy to determine clearly due to the large effect of heat source on coal oxidation in temperature rising experiments. Here, focused on sub-bituminous coal, the oxygen effect was separated from coal oxidation by continuously measuring FTIR spectra of coal with respect to varying temperatures and under oxygen and nitrogen. The active groups’ real-time changes of coal oxidation, thermal treatment and oxygen effect were measured. The carboxylic ester and carboxyl units are the main functional groups that increase with temperatures increasing under oxygen and nitrogen, while the other functional groups decrease in quantity. The oxygen effect promoted the consumption of aliphatic hydrocarbons and hydroxyl groups and also promoted the formation of oxygen-containing groups (except hydroxyl). Four characteristic temperature stages involved in the oxygen effect and their key functional groups were identified. Simultaneously, the relationship of oxygen consumption and chemisorption in oxygen effect was analyzed. The starting temperature of oxygen chemisorption is between 50 and 60°C. The maximum contribution of oxygen effect was observed in methyl and methylene groups. These results are important for chemical control of coal spontaneous combustion. The oxidation of aliphatic hydrocarbon should be controlled before oxygen chemisorption. The value of oxygen consumption between 70 and 80°C can be measured accurately due to the constant chemisorption rate, which help to identify the tendency for spontaneous combustion. These results will help in better understanding of the reaction mechanism of coal oxidation, especially the oxygen effect.     

Robust Preparation of Atomic Concatenated Greenberger–Horne–Zeilinger States via Shortcuts to Adiabaticity

Here, a protocol for robust preparation of an atomic concatenated Greenberger–Horne–Zeilinger (C‐GHZ) state via shortcuts to adiabaticity (STA) is proposed. The devices for implementing the protocol consist of atoms, cavities, and the optical fibers, which are feasible with current technology. The atoms are trapped in the separated cavities allowing individual control over each atom with classical fields. STA helps to design Rabi frequencies of classical fields so that the atoms can be driven from the initial states to the target states. The numerical simulations show that the protocol holds robustness against atomic spontaneous emissions and photonic leakages. Thus, the protocol may be realized by experiments in the near future.     

A Quninolylthiazole Derivatives as an ICT-Based Fluorescent Probe of Hg(II) and its Application in Ratiometric Imaging in Live HeLa Cells

As a structural analogue of pyridylthiazole, 2-(2-benzothiazoyl)-phenylethynylquinoline (QBT) was designed as a fluorescent probe for Hg(II) based on an intramolecular charge transfer (ICT) mechanism. The compound was synthesized in three steps starting from 6-bromo-2-methylquinoline, with moderate yield. Corresponding studies on the optical properties of QBT indicate that changes in the fluorescence ratio of QBT in response to Hg(II) could be quantified based on dual-emission changes. More specifically, the emission spectrum of QBT before and after interactions with Hg(II) exhibited a remarkable red shift of about 120 nm, which is rarely reported in ICT-based fluorescent sensors. Finally, QBT was applied in the two-channel imaging of Hg(II) in live HeLa cells.     

Electrochemical properties of modified acetylene black/sulfur composite cathode material for lithium/sulfur batteries

Lithium/sulfur (Li/S) batteries have a high theoretical specific capacity of 1672 mAh g^?1. However, the insulation of the elemental sulfur and polysulfides dissolution could result in poor cycling performance of Li/S batteries, thus restricting the industrialization process. Here, we prepared sulfur-based composite by thermal treatment. The modified acetylene black (H-AB) was used as a carrier to fix sulfur. The H-AB could interact with polysulfides and reduce the dissolution of polysulfides in the electrolyte. Nonetheless, the conductivity of H-AB relatively reduced. So the conductivity of the sulfur electrode would be improved by the addition of the conductive agent (AB). In this paper, the different content of conductive agent (AB) in the sulfur electrode was studied. The electrochemical tests indicate that the discharge capacity of the sulfur electrode can be increased by increasing the conductive agent (AB) content. The H-AB@S composite electrode with 30 wt.% conductive agent has the best cycle property. The discharge capacity still remains at 563 mAh g^?1 after 100 cycles at 0.1 C, which is 71% retention of the highest discharge capacity.     

天光背景下混浊大气中成像质量的分析方法

调制传递函数(MTF)定量描述混浊介质对图像质量的影响,它是混浊介质的固有光学特性,利用等效原理可以获得MTF从低频到高频的完整特征.在实际应用中,混浊介质中的图像质量不仅取决于介质的MTF,还与图像的背景辐射密切相关.本文从混浊大气中图像退化机理出发,理论分析了空间频域中天光背景下图像质量的退化过程.参考等效原理,提出了一种考虑天光背景的表观MTF,得到了表观MTF与介质MTF和天光背景的定量关系,从而得到了一种分析背景辐射下混浊介质中图像质量的有效便捷方法.针对图像质量优化方法,从空间频域的角度提出了一种评价原则.     

高亮度大功率半导体激光器光纤耦合模块

应用ZEMAX软件设计出高亮度大功率光纤耦合模块。采用16支输出功率12 W的单偏振态单边发射半导体激光器,耦合进芯径100 μm、数值孔径0.22的光纤中。模块输出功率达到189.4 W,耦合效率达到98.6%,亮度达到94.66 MW/cm²-str。通过SolidWorks软件优化得到新热沉结构,应用ANSYS软件进行热分析,结果表明新热沉结构最高温度为42.4℃,相比优化前温度降低1℃以上,得到良好散热结构模型。