催化动力学测定痕量砷(Ⅲ)

在醋酸介质中,发现痕量砷(Ⅲ)能灵敏地催化高碘酸钾氧化靛红la褪色的指示反应,研究了该催化反应的最佳条件与动力学参数,建立了一种新的测定痕量砷(Ⅲ)的方法。该法的线性范围0.0-40μg/LAs(Ⅲ),检测限为1.92×10-6g/L,用于环境水样中砷(Ⅲ)的测定,获得了满意的结果。     

基于cDNA宏阵列的系统聚类分析猪发育阶段的基因表达谱

取杜洛克猪胚胎第33,45,55，65．75天的背最长肌样本．用cDNA Macroarray分析方法和聚类分析技术分析了327个EST在骨骼肌内不同发育阶段的基因表达谱．结果表明有98条EST在不同发育时期显著差异表达．第33天和第45天两阶段基因表达状态相似．第55天和第65天基因表达状态相似．而第75天的基因表达与第55天和第65天两个阶段的基因表达具有相近的聚类关系．表达状态相近，基因功能相似的基因大都被聚类在一起．     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

光电光谱法分析钢中钙

本文研究了用光电光谱法测定钢中钙的方法 ,确定了最佳分析条件 ,分析了共存元素的干扰情况。用本方法测定钢中钙 ,具有良好的准确度和精密度 ,结果令人满意。     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

ICF研究中的Rayleigh-Taylor不稳定性实验用靶

 概述了当前研究Rayleigh-Taylor不稳定性增长实验所用的靶型情况。从实验用靶来看，调制靶的设计正从平面向立体发展，出现了球形和柱形等新靶形，制备手段包括精密机械微加工、激光束、电子束和离子束加工、半导体工艺和微米纳米技术加工等。根据对国外新靶型的研究，结合国内工艺条件和实验需求，对国内可能采用的靶型进行了研究探索。     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

CT实验仪的研制及其在物理教学中的应用

介绍了我们研制的CT实验仪的原理及开发，使用情况，包括CT的物理，数学原理，CT装置的结构，性能、工作原理等，文末给出实验结果，并对装置在物理实验教学中的意义作了讨论。