拟薄水铝石/陶瓷胶态加工浆料的流变性能

用拟薄水铝石纳米胶粒分散微米二硼化钛形成固含量为60Wt%的稳定陶瓷浆料,实验考察了拟薄水铝石固含量、二硼化钛固含量、温度对浆料流变性、稳定性的影响,对纳米γ-AlOOH胶粒分散微米TiB2的机制进行了讨论.大小约20nm的γ-AlOOH颗粒相互网联,成为外加微米陶瓷颗粒的骨架.浆料粘度随二硼化钛固含量的增加而增大,温度升高有利于胶体中薄水铝胶团与二硼化钛颗粒的相互作用并促进分散.     

Properties of nanobelts and nanotubes measured by in situ TEM.

Characterizing the physical properties of individual nanostructures is challenging because of the difficulty in manipulating the objects of sizes from nanometers to micrometers. Most nanomeasurements have been carried using scanning probe microscopy. In this article, we demonstrate that transmission electron microscopy can be a powerful tool for quantitative measurements of the mechanical and electrical properties of a single nanostructure. Dual-mode resonance of an oxide nanobelt has been observed, and its bending modulus has been measured. An in situ technique was demonstrated for measuring the work function at the tip of a carbon nanotube. The ballistic quantum conductance of a multiwalled carbon nanotube was observed at room temperature using the setup in TEM. It is concluded that in situ measurement by directly linking structure with property is a future direction of electron microscopy.     

Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.     

Indirect Determination of Captopril with Sodium Nitrate and Thiocyanate by Floatation Separation of Copper

A new method for indirect determination of captopril (CPT) with NaNO₃ and NH₄SCN by floatation and separation of copper has been studied. In the weak acid, a small amount of Cu(II) can be reduced to Cu(I) by CPT, then Cu(I) reacted with the SCN, which can float on the surface of the liquid phase with NaNO₃. A good linear relationship is observed between the floatation yield (E%) of Cu(II) and the amount of captopril. The linear range is 2?32 mg/L. On the ground, captopril can be indirectly determined by determining E(%) of Cu(II). The method is simple, rapid, reliable and has good selectivity. The developed method can be applied to indirect determination of captopril with satisfactory results.     

A thermogravimetric analyzer for condensable gas adsorption under subatmospheric conditions

Potential alternative to petrochemical polymers, soy protein isolate (SPI), a plentily available, natural biopolymer is chemically modified with thiourea at 2.5, 5, 7.5, 10, 15 and 20 mass/mass% for better processing of plastic as a raw material. From the FTIR studies, it has been ascertained that there is no bonding reaction between SPI and thiourea and it acts as a modifier only. Thermogravimetric analysis of the modified material has been followed using a computer analysis method, LOTUS package, developed by us for assigning the degradation mechanism. A number of equations have been used to evaluate the kinetic parameters. The mechanism of degradation of the biopolymer is explained on the basis of the kinetic analysis.     

混合配体、希土三元配合物的研究 Ⅳ.3,5—二硝基水扬酸(H_2DNSA)、邻菲咯啉(phen)、希土(RE)三元固体配合物的合成及性质

本文报道了十种希土元素与3,5-二硝基水扬酸、邻菲咯啉三元配合物的制备方法。通过元素和化学分析测定了化合物的化学组成,并用红外光谱、紫外光谱、差热分析、磁化率、X射线粉天衍射等对所合成的化合物进行了结构和性质的研究。     

双波长K系数—标准加入吸光光度法同时测定锰和锌

研究应用双波长K系数—标准加入吸光光度法同时测定锰和锌二组分混合物.试验确定了锰和锌测定中K_(Mn)与K_(Zn)的回归方程.对合成试样、人发试样测定,结果满意.     

A metallo-capped polyrotaxane containing calix[4]arenes and cyclodextrins and its highly selective binding for Ca2+

A water-soluble nanometer-scale metallocapped polyrotaxane has been prepared by the inclusion complexation of azo-calixarenes with metallo-bridged bis(beta-CD)s, displaying highly selective binding for Ca(2+).