光谱法分析塑料抛光膏的组分

分别采用硅胶柱色谱法和溶剂抽提,分离优质塑料抛光膏中的油脂和磨料部分。油脂部分依次以石油醚、苯、氯仿、乙酸乙酯、丙酮、乙醇为淋洗剂进行洗脱,利用红外光谱、核磁共振光谱法对所分离组分进行了结构鉴定。磨料部分通过原子发射光谱和X射线衍射法进行金属元素及形态分析。通过上述光谱法确定了该塑料抛光膏的化学组成和结构。     

峰形类比巧析法在红外光谱实验教学中的应用

通过红外光谱实验教学,把理论知识贯穿于实验操作和解析中,选取典型的化合物,采用峰形比较法,让学生掌握解析红外谱图的一般规律。     

稚鸡蛋中Ca、Cu、Fe、Zn、Mn、Se、Cr和Pb含量的测定

采用原子吸收光谱法,测定了稚鸡蛋中的钙、铜、铁、锌、锰、硒、铬和铅的含量,并对其结果进行了分析。各元素在实验范围内,线性关系良好,回收率在97.9%—102.2%之间。稚鸡蛋中Ca、Cu、Fe、Zn、Mn、Se含量分别为973.2、5.86、419.40、99.78、7.66、1.25μg·g~(-1),显著高于罗曼鸡蛋。测定结果显示稚鸡蛋中含有丰富的矿物元素,具有较高的营养和保健价值。     

Segmented circular LD arrays side-pumped a Nd:YAG laser rod

We design a Nd:YAG module with symmetrical LD side-pumped structure in a periodical arrangement between circular LD arrays and holders. This novel design has great potential to be used in compact and miniature laser systems. Design optimization and simulation on thermal effects have been performed. An experiment has also been carried out. The experiment results indicate the all-solid-state laser with the-Nd:YAG module can stably operate in the range of 10–30 Hz with no controlling temperature by TE cooler. The laser beam had a divergence angle less than 3.8 mrad and a maximum output pulse of 174 mJ has been obtained at the pump current of 50 A and working frequency of 23 Hz, corresponding to optical-optical conversion efficiency of 40.2%.     

A computational DFT analysis of OH chemisorption on catalytic Pt(111) nanoparticles

In this article, various energies and geometries of pure platinum nanoparticles and those of platinum nanoparticles with adsorbed OH were investigated. Fourteen different platinum clusters of 3–40 atoms were studied using spin-unrestricted density functional theory (DFT) with a double numerical plus polarization basis set. This range of sizes gave enough information for establishing the general trends that were the primary goal of the study. Three different shapes of platinum clusters were presented, and the effect of cluster size on binding energy, total energy, and HOMO–LUMO energy gap was investigated. Subsequently, same calculations were performed for those selected Pt clusters with OH adsorbate on the surface. The results show that the stability of both the pure clusters and the clusters with adsorbed OH molecule increases with an increase of cluster size. This fact indicates that direct influence of the size of Pt cluster on the reaction rate is possible, and the understanding of how cluster size would affect binding energy is important. As expected, the effect of cluster size on total energy of molecule was shown to be a linear function independent of cluster type. We also found that optimized (stable) Pt clusters were bigger in size than that of the initial clusters, or clusters with bulk geometry.     

Synthesis, structure, and fluorescence of the novel cadmium(II)-trimesate coordination polymers with different coordination architectures

Three novel complexes, Cd3tma2*13H2O (1), Cd3tma2*dabco*2H2O (2), and Cd3Htma3*8H2O (3) (tma = trimesate), of cadmium(II)-trimesate coordination polymers are obtained from hydrothermal reaction. 1 (C18H32O25Cd3) crystallizes in the monoclinic C2/c space group [a = 18.985(2) A, b = 7.3872(6) A, c = 20.432(2) A, = 97.1660(10), and Z = 4]. 2 (C24H22N2O14Cd3) crystallizes in the monoclinic P2(1)/c space group [a = 10.1323(2) A, b = 19.5669(5) A, c = 13.15880(10) A, = 108.9810(10), and Z = 4]. 3 (C27H28O26Cd3) belongs to the trigonal P31c space group [a = 15.7547(3) A, b = 15.7547(3) A, c = 7.93160(10) A, and Z = 2]. The Cd(II) centers in the three complexes are bridged by tma ligands in the coordination fashion of unidentate, bridging unidentate, bidentate, chelating bis-bidentate, chelating/bridging bis-bidentate, or chelating/bridging bidentate to form the T-shaped molecular bilayer motif for 1, chicken-wire-like motif for 2, and honeycomb-like porous structure for 3, respectively, in which the T-shaped molecular bilayer motif and chicken-wire-like motif are further interlinked in interdigitating or alternating fashion to construct the different coordination architectures. These three complexes exhibit strong fluorescent emission bands at 355 nm (lambda(ex) = 220 nm) for 1, 437 nm (lambda(ex) = 365 nm) for 2, and 353 nm (lambda(ex) = 218 nm) for 3 in the solid state at room temperature.     

Unusual magnetic properties of one-dimensional molecule-based magnets associated with a structural phase transition

Three ion-pair complexes, [RbzPy](+)[Ni(mnt)(2)](-) (mnt(2)(-) = maleonitriledithiolate; [RbzPy](+) = 4-R-benzylpyridinium; R = Br (1), Cl (2), and NO(2) (3)), with unusual magnetic properties have been synthesized and characterized. The crystal structures of 1 and 2 have been solved. The two complexes belong to the P2(1)/c space group with Z = 4 and C(20)H(11)BrN(5)NiS(4), a = 12.0744(17) A, b = 26.369(4) A, c = 7.440(3) A, and beta = 102.63(3) degrees for 1 and C(20)H(11)ClN(5)NiS(4), a = 12.105(2) A, b = 26.218(4) A, c = 7.374(2) A, and beta = 102.55(2) degrees for 2, respectively. The [Ni(mnt)(2)](-) anions in 1-3 form uniformly spaced one-dimensional (1-D) magnetic chains of s = 1/2 at room temperature. The temperature dependences of the susceptibility for 1-3 show that they undergo phase transitions. All three complexes are paramagnetic in their high-temperature (abbreviation HT) phase and diamagnetic in the low-temperature (abbreviation LT) phase because of strong dimerization along the stacking direction. The results of thermal analysis (DSC) further confirm that the phase transition for 1 and 2 is first-order but maybe second-order for 3. The phenomena observed in this study are similar to those of the 1-D radical systems.     

Enantioselective synthesis of the protein phosphatase inhibitor (-)-motuporin

A highly convergent asymmetric synthesis of the protein phosphatase inhibitor motuporin 1a is described. Synthesis and coupling of the individual peptide fragments [34 + 35 --> 51] followed by macrocyclization afforded the fully protected motuporin precursor 33, which is converted to the natural product by dehydration and ester hydrolysis. Six of the eight stereogenic centers associated with the natural product were introduced using asymmetric crotylsilane bond construction methodology. Our approach features an efficient Pd(0)-catalyzed cross-coupling reaction between a configurationally well-defined vinyl zinc intermediate 22 and an (E)-vinyl iodide 7, which afforded compound 43, resulting in the construction of the trisubstituted (E,E)-diene system of the motuporin side chain. Improved reaction conditions for macrocyclization in the formation of 33 are also detailed.     

Modification of polybenzimidazole: Synthesis and thermal stability of poly(N1-methylbenzimidazole) and poly(N1,N3-dimethylbenzimidazolium) salt

Poly(N₁,N₃-dimethylbenzimidazolium) (PDMBI) salt and poly(N₁-methylbenzimidazole) (PMMBI) were synthesized by methylation of commercial polybenzimidazole [poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole (PBI)]. First, the N-lithium salt of polybenzimidazole was formed by treating polybenzimidazole solution of 1-methyl-2-pyrolidinone (NMP) with lithium hydride at 80°C for 18 h. Ninety percent substitution of PMMBI was obtained by treating the N-lithium salt of PBI with equimolar ratio of iodomethane at room temperature. Upon addition of excess iodomethane to the lithium salt of PBI at 80°C, a polymer was formed that showed 100% substitution on the N₁ nitrogen and about 30% substitution of the methyl group on the N₃ nitrogen in the form of N₁,N₃-dimethylbenzimidazolium iodide salt [PDMBI (30%)]. The content of the benzimidazolium iodide salt was increased to about 90% by dissolving PDMBI (30%) in dimethyl sulfoxide (DMSO) and re-treating with excess iodomethane at 80°C overnight. The modified PBI polymers were characterized by NMR and FTIR. The modified PBI differed in solubility from PBI. PMMBI could be easily dissolved in NMP and PDMBI in DMSO at room temperature. The solution of PDMBI could be mixed with water in all proportions without precipitation. PDMBI could be also dissolved directly in a mixture of DMSO and water (1 : 1). Typical polyelectrolyte behavior of viscosity was found in solution of PDMBI (30%) and PDMBI (90%) when DMSO and a mixture of DMSO and water were used as solvents. A salt effect on viscosity was also found in the mixed solvent solution. Thermogravimetric analysis (TGA) showed that the methyl group on the imidazole ring was unstable above 180°C under nitrogen. When PDMBI was heated under nitrogen, one of the methyl groups was lost with the counterion to result in a neutral PMMBI. © 1993 John Wiley & Sons, Inc.