两种β－环糊精衍生物手性石英毛细管柱拆分对映体

合成了全戊基化（Ⅰ）和部分戊基化三氟乙酰化（Ⅱ）的两种“环糊精手性固定相。将它们分别与ＯＶ－７混合制备出柱效大于４１００塔片／ｍ，热稳定性可达２１０℃的手性石英毛细管住。对映体拆分结果表明，固定相Ⅰ对醇、二醇、胺、γ－内酯等对映体比Ⅰ有更高的选择性。     

HYDROFORMYLATION CATALYSIS USING POLYMER-SUPPORTED MULTINUCLEAR RHODIUM CARBONYL CLUSTER CATALYSTS

A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh_4(CO)_(12) with several kinds of polymer supports such as crosslinked poly (N-vinylpyrrolidone) (PNVP) and crosslinked poly ( styrene-co-maleic anhydride) (PMAn), and subsequently were used to catalyze the hydroformylation of olefins. The catalysts were characterized by IR, SEM and XPS. The influence of the supports structure and crosslinking, metal's content and particle size of the supports on the catalysts hydroformylation properties was studied. The factors which affect the catalytic conversion were also examined. The experimental results show that the polymer-supported Rh cluster catalysts possess very high catalytic activity and aldehyde selectivity as well as good reproducibility.     

Simultaneous determination of hydride (Se) and non-hydride-forming (Ca,Mg, K,P, S and Zn) elements in various beverages (beer,coffee, and milk), with minimum sample preparation,by ICP–AES and use of a dual-mode sample-introduction system

A method has been developed enabling direct analysis (i.e. after dilution only) of beer, instant coffee, milk, and milk powder by ICP–AES. Analysis of the beverages after dilution with a low concentration of HNO₃ was used for accurate determination of essential minor and trace elements (Ca, Mg, K, P, S, and Zn). Selenium, introduced as the hydride, was determined simultaneously with the other non-hydride-forming elements using the commercial multi-mode sample-introduction system (MSIS). To obtain accurate results, however, some simple pre-treatment was needed. Analysis was also performed after microwave-assisted decomposition of the samples. Three different modes of sample-preparation, i.e. dilution only, partial decomposition (aqua regia treatment), and complete decomposition were compared. The results obtained by use of the three different sample-preparation methods were in very good agreement. Results from analysis of certified reference material (SRM 1459 non-fat milk powder) also verified the accuracy of the methods. The limit of detection obtained for Se using dual-mode sample introduction was 0.5 ng mL^–1, which corresponds to approximately 2 ng g^–1 in beer and approximately 4 ng g^–1 in coffee and milk when using the recommended procedure.     

Correlated intermolecular interaction components from asymptotically corrected Kohn-Sham orbitals

In these years there was considerable interest inunderstanding of intermolecular forces in energetic(explosive) systems[1—3]. The supermolecular approach(SM) is widely adopted for calculating ab initio in-termolecular interactions. Nevertheless, it is unable toprovide physically meaningful interaction contribu-tions such as electrostatic, induction, repulsion anddispersion energies. In contrast, the symmetry-adaptedperturbation theory (SAPT)[4—8] has the ability to de-rive these correlated…     

New ceramides from the flower of Albizia iulibrissin

A new ceramide and its glycoside were isolated from the flower of Albizia julibrissin. Their structures were established as (25,35,4R,8E)-2-[(2'R)-hydroxyhexadecanoylamino]-8-tetra-cosene-l,3,4-triol(I)and 1-O-β-D-glucopyranosy1-(2S,3S,4R,8E)-2-[(2'R)-hydroxy-hexade-canoylamino]-8-tetracosene-1,3,4-triol (II) on the basis of chemical and spectroscopic studies.     

Removal of Endotoxin from Human Serum Albumin Solutions by Hydrophobic and Cationic Charged Membrane

Removal of end6toxin from medicine injection is very important, becauseendotoxin withpotential biological activity causes pyrogenic and shock reactions in' mammals-'on...intravenous injection even as law as "an6gram amounts. Endotoxin, a constituent ofpotential contaminant of physiological fluids and aqueous solutions 'and very stable atextreme temperature and PH values. For removing endotoxin from solutions ofbiomolecules, such as HSA, adsorption techniques are usedl.' Many methods forendot…     

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论周昕，万宏，欧庆瑜（中国科学院兰州化学物理研究所兰州７３００００）１前言自１９８８年Ｋｏｎｉｇ￣［１］等人成功地将改性环糊精用于毛细管气相色谱固定相拆分对映体以来，环糊精衍生物以其高选择性...     

A New Convenient Method for the Resolution of 1, 1''''-Binaphthalene-2, 2''''-diol Via a Phosphite Using (-)-Menthol as Resolving Agent

Optically active 1,1-binaphthalene-2, 2-diol has become a quite important chiral source in different fields of chirotechnology, especially in asymmetric synthesis1. Its synthesis and resolution has been extensively studied and various resolution methods have been reported2. Among the reported resolution methods, the following three, namely, via the formation of phosphoric acid derivatives3, boric acid derivatives4 and inclusion complexes5, are the most important. OHOH+_( )-1(-)-(S)-1(+)-(R)…     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.