Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

偶氮苯衍生物三阶非线性的四波混频研究

用皮秒Ｎｄ：ＹＡＧ激光器的倍频光（５３２ｎｍ）对具有离域π－共轭电子云结构的偶氮苯类样品材料作简并四波混频补给，测得三阶非线性电极化率ｘ＾（３）和它们的时间响应分别为１０＾－９ｅｓｕ和２０ｐｓ，并对影响ｘ＾（３）的瞬时光栅作用和ｘ＾（３）的响应时间人了讨论。     

Influence of Cr interlayer on the structure and optical properties of Ag films on glass substrate by magnetron sputtering

Optical properties and microstructure of Ag film on glass substrate with Cr intermediate layer were studied by using spectrophotometer and XRD. The spectra results showed that introducing Cr intermediate layer reduced the surface roughness and promoted the reflectivity of Ag film. The XRD analysis showed that the crystalline grains increased and the stress decreased. The adhesion was also improved by using the tape test method.     

Preparing polymer brushes on polytetrafluoroethylene films by free radical polymerization

Films of polytetrafluoroethylene (PTFE) were exposed to sodium naphthalenide (Na/naphtha) etchant so as to defluorinate the surface for obtaining hydroxyl functionality. Surface-initiators were immobilized on the PTFE films by esterification of 4,4′-azobis(4-cyanopentanoic acid) (ACP) and the hydroxyl groups covalently linked to the surface. Grafting of polymer brushes on the PTFE films was carried out by the surface-initiated free radical polymerization. Homopolymers brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azo-functionalized PTFE surface. The chemical composition and topography of the graft-functionalized PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FT-IR spectroscopy and atomic force microscopy (AFM). Water contact angles on PTFE films were reduced by surface grafting of MMA.     

On the deformation and fracture of porous materials

The constitutive behavior of porous materials (including the yield loci, the void growth rate, the macro stress-strain relation and the strain to localization instability) is examined based on the lower bound approach proposed by the present authors. These results are then compared with the experimental and the finite element results as well as those predicted by Gurson's equations. Emphasis is placed on approaching the real behavior from the upper and the lower bound analysis. Calculation is also made on the influence of void nucleation on the critical strain to instability and a modified strain-controlled nucleation criterion is proposed. Finally the instability and fracture of AISI4340 steel in plane strain tension is examined and comparison is made between theoretical and experimental results.     

非园断面通道层流摩擦阻力与换热理论研究的新进展

本文介绍作者近些年来对椭圆、矩形、扇形、任意三角形、正多边形、环形等各种非圆断面通道层流摩擦阻力与换热理论的研究成果，给出大量新的速度与温度场表达式，以及摩擦阻力与换热的新的计算公式。本文对传统的层流阻力与换热理论进行了一次系统的补充与完善，同时考虑到工程需要，对所有繁杂的理论公式都进行了化简，给出形式简单而且精度相当高的近似公式。     

Studies on self-pumped phase conjugation in Cu-doped (K0.5Na0.5)0.2(Sr0.61Ba0.39)0.9Nb2O6 crystals

The use of Cu-doped (K_0.5Na_0.5)_0.2(Sr_0.61Ba_0.39)_0.9Nb₂O₆ as self-pumped phase conjugators using internal reflection is reported. Reflectivities as high as 63% at 5145.5 nm and 60% at 632.8 nm were realized. It was found that the photorefractive response changes significantly at different doping concentration. The responses of the crystals to the laser wavelength, incident angle and dopant concentration are studied.     

Con-A诱发的淋巴细胞化学发光

本文以刀豆素 A(ConA)为诱发剂,研究了绵羊肺淋巴液中的淋巴细胞鲁米诺依赖的化学发光现象.结果表明,ConA诱发的淋巴细胞化学发光测定具有迅速、简便和敏感等优点,可作为淋巴细胞活化的检测方法.淋巴细胞悬液(106～107个细胞/ml)1ml、ConA溶液(2mg/ml)0.1ml、鲁米诺溶液(10-3M)50μl为最佳测定体系.多形核白细胞(PMN)混杂可明显增强发光体系的发光强度.因此,测定外周血中的淋巴细胞化学发光,细胞的纯化是一个不可忽视的问题.消炎痛可抑制其发光,说明发光可能与花生四烯酸代谢有关.     

Analysis of Paeoniae Radix by high-performance liquid chromatography-electrospray ionization-mass spectrometry.

A method has been developed for the qualitative analysis of paeonol, paeoniflorin and their derivatives in Paeoniae Radix by high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS). Gradient elution with acetonitrile-water solvent system was employed in an HPLC-ESI-MS study. The negative-ion ESI mode was suitable for these compounds. The peaks were identified by their mass spectra, UV spectra and fragments of their MS2 spectra. The structures of three unknown compounds are inferred in this paper.     

应用美学原理进行愉悦式教学的尝试

由于物理学的学习难度均较大,使学生学习完全处于被动状态,如何扭转此局面呢?愉悦式教法定能如愿。1 让学生充分领略学科的美 要学好物理,首先必须对它们产生兴趣.学科安排本身就是一种美,加之论述的逻辑