Azobenzene-linked porphyrin-fullerene dyads

A new group of porphyrin-fullerene dyads with an azobenzene linker was synthesized, and the photochemical and photophysical properties of these materials were investigated using steady-state and time-resolved spectroscopic methods. The electrochemical properties of these compounds were also studied in detail. The synthesis involved oxidative heterocoupling of free base tris-aryl-p-aminophenyl porphyrins with a p-aminophenylacetal, followed by deprotection to give the aldehyde, and finally Prato 1,3-dipolar azomethineylide cycloaddition to C60. The corresponding Zn(II)-porphyrin (ZnP) dyads were made by treating the free base dyads with zinc acetate. The final dyads were characterized by their 1H NMR, mass, and UV-vis spectra. 3He NMR was used to determine if the products are a mixture of cis and trans stereoisomers, or a single isomer. The data are most consistent with the isolation of only a single configurational isomer, assigned to the trans (E) configuration. The ground-state UV-vis spectra are virtually a superimposition of the spectral features of the individual components, indicating there is no interaction of the fullerene (F) and porphyrin (H2P/ZnP) moieties in the ground state. This conclusion is supported by the electrochemical data. The steady-state and time-resolved fluorescence spectra indicate that the porphyrin fluorescence in the dyads is very strongly quenched at room temperature in the three solvents studied: toluene, tetrahydrofuran (THF), and benzonitrile (BzCN). The fluorescence lifetimes of the dyads in all solvents are sharply reduced compared to those of H2P and ZnP standards. In toluene, the lifetimes of the free base dyads are 600-790 ps compared to 10.1 ns for the standard, while in THF and BzCN the dyad lifetimes are less than 100 ps. For the ZnP dyads, the fluorescence lifetimes were 10-170 ps vs 2.1-2.2 ns for the ZnP references. The mechanism of the fluorescence quenching was established using time-resolved transient absorption spectroscopy. In toluene, the quenching process is singlet-singlet energy transfer (k approximately 10(11) s-1) to give C60 singlet excited states which decay with a lifetime of 1.2 ns to give very long-lived C60 triplet states. In THF and BzCN, quenching of porphyrin singlet states occurs at a similar rate, but now by electron transfer, to give charge-separated radical pair (CSRP) states, which show transient absorption spectra very similar to those reported for other H2P-C60 and ZnP-C60 dyad systems. The lifetimes of the CSRP states are in the range 145-435 ns in THF, much shorter than for related systems with amide, alkyne, silyl, and hydrogen-bonded linkers. Thus, both forward and back electron transfer is facilitated by the azobenzene linker. Nonetheless, the charge recombination is 3-4 orders of magnitude slower than charge separation, demonstrating that for these types of donor-acceptor systems back electron transfer is occurring in the Marcus inverted region.     

Atomic simulation of the point defects in three low‐index surfaces of BCC transition metals with the MAEAM

The favorable position of an adatom and the formation energies of a single vacancy and an adatom‐vacancy pair in three low‐index surfaces of body‐centered cubic (BCC) transition metals have been calculated by using the modified analytical embedded atom method (MAEAM). The favorable position of an adatom is at the fourfold and twofold positions above the (100) and (110) surfaces respectively, but it is deviated from the threefold position of the (111) surface. Either the heights of the adatom from the top atomic layer, or the formation energies of a single vacancy, or an adatom‐vacancy pair decrease in sequence of the (110), (100) and (111) surfaces for each metal. Furthermore, the formation energy of an adatom‐vacancy pair is always lower than that of a single vacancy for each low‐index surface of each metal, which shown the formation of adatom‐vacancy pair is more energetically favorable than the vacancy for the BCC transition metals. Copyright © 2007 John Wiley & Sons, Ltd.     

Two Novel Alkaloids from Zanthoxylum nitidum

Two novel alkaloids, 4,5‐dihydroxy‐1‐methyl‐3‐oxo‐2‐(trichloromethyl)‐3H‐indolium chloride ( 1 ) and 4‐(2‐methoxyethyl)‐N,N‐dimethylbenzenamine ( 2 ), were isolated from the EtOH extract of the roots of Zanthoxylum nitidum. Their structures were identified on the basis of spectroscopic and mass‐spectrometric analyses.     

Nonisothermal Kinetics of Sub‐Solidus Phase Transitions in C10Zn,C16Zn and Their Binary System

Nonisothermal kinetics of the solid‐solid phase transition in (n‐C₁₀H₂₁NH₃)₂ZnCl₄(C₁₀Zn), (n‐C₁₆H₃₃NH₃)₂ZnCl₄(C₁₆Zn) and their binary system were determined by Kissinger and Ozawa methods from DSC measurements. The activation energy E_a of the binary system shows a waving dependence on W_C10Zn%, which is caused by not only an intermediate (C₁₀H₂₁NH₃)(n‐C₁₆H₃₃NH₃)ZnCl₄ but also three solid solution ranges (α, β, γ) in the phase diagram of C₁₀Zn‐C₁₆Zn. The variations of the layer d‐spacing are also convenient for the above result.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Concurrent Covalent and Supramolecular Polymerization

Covalent and supramolecular polymerizations, both of which offer their own unique advantages, have emerged as popular strategies for making artificial materials. Herein, we describe a concurrent covalent and supramolecular polymerization strategy—namely, one which utilizes 1) a bis‐azide‐functionalized diazaperopyrenium dication that undergoes polymeriation covalently with a bis‐alkyne‐functionalized biphenyl derivative in one dimension as a result of a rapid and efficient β‐cyclodextrin(CD)‐accelerated, cucurbit[6]uril(CB)‐templated azide–alkyne cycloaddition, while 2) the aromatic core of the dication is able to dimerize in a criss‐cross fashion by dint of π–π interactions, enabling simultaneous supramolecular assembly, resulting in an extended polymer network in an orthogonal dimension.     

Three New Lycopodium Alkaloids from Phlegmariurus fargesii

Three new Lycopodium alkaloids, fargesiines A – C ( 1  –  3 , resp.), along with a known compound ( 4 ), were isolated from the whole plants of Phlegmariurus fargesii. Their structures were elucidated on the basis of spectroscopic data and chemical correlations. Compounds 1  –  4 were tested in an assay for acetylcholinesterase (AChE) inhibitory activity.     

A Variety of Phase‐Transition Behaviors in a Niccolite Series of [NH3(CH2)4NH3][M(HCOO)3]2

A niccolite series of [bnH₂²⁺][M(HCOO)₃]₂ (bnH₂²⁺=1,4‐butyldiammonium) shows four kinds of metal‐dependent phase transitions, from high temperature para‐electric phases to low‐temperature ferro‐, antiferro‐, glass‐like, and para‐electric phases. The conformational flexibility of bnH₂²⁺ and the different size, mass, and bonding character of the metal ion lead to various disorder‐order transitions of bnH₂²⁺ in the lattice and relevant framework modulations, thus different phase transitions and dielectric responses. The magnetic members display a coexistence or combination of electric and magnetic orderings in the low‐temperature region.     

Synthesis and evaluation of a maltose‐bonded silica gel stationary phase for hydrophilic interaction chromatography and its application in Ginkgo Biloba extract separation in two‐dimensional systems

Maltose covalently bonded to silica was prepared by using carbonyl diimidazole as a cross‐linker and employed as a stationary phase for hydrophilic interaction liquid chromatography. The column efficiency and the effect of water content, buffer concentration, and pH value influenced on retention were investigated. The separation or enrichment selectivity was also studied with nucleosides, saccharides, amino acids, peptides, and glycopeptides. The results indicated that the stationary phase processed good separation efficiency and separation selectivity in hydrophilic interaction liquid chromatography mode. Moreover, a two‐dimensional hydrophilic interaction liquid chromatography× reversed‐phase liquid chromatography method with high orthogonality was developed to analyze the Ginkgo Biloba extract fractions. The development of this two‐dimensional chromatographic system would be an effective tool for the separation of complex samples of different polarities and contents.     

六氰合铁酸锰铬修饰电极的制备及其电化学行为

应用循环伏安法在活化玻碳电极(GCE)表面制备六氰合铁酸锰铬(MnCrHCF)膜修饰电极(MnCrH-CF/GCE)并研究其电化学性质.探讨影响膜电沉积的因素,研究pH值以及不同支持电解质等制备条件对该修饰电极性能的影响,优化制备工艺,分析其反应机理.