利用BESⅢ的双层TOF寻找D0-D0混合的研究

在ψ(3770)处, D⁰→K^－π⁺是研究D⁰-D⁰混合的非常理想的衰变道. 实验上, 良好K/π识别技术将对寻找D⁰-D⁰混合过程起着决定性的作用. 在BESⅢ实验的物理预研究中, 发现利用飞行时间的信息, 能够精确测定末态中含有多条带电径迹事例的起始时间, 从而可以改善飞行时间计数器的时间分辨率. 进一步的研究表明, 应用该方法后, BESⅢ双层TOF的时间分辨率从～78ps降到～64ps. 按照20fb^－1的ψ(3770)数据量进行估算, 在95%置信度下, D⁰-D⁰混合率的上限值可以提高7%左右.     

BESIII barrel time-of-flight （TOF） calibration using cosmic ray data

The principle of the method for the BESIII TOF calibration using cosmic ray data without magnetic field are reported in this paper. After applying calibration constants, the single-end readout time resolution could reach about 150 ps, and the time resolution for one layer is achieved to be about 110 ps. The paper also described the extraction scheme for the event start time of cosmic events.     

Kr和Kr2的实验和理论研究

利用超声分子束技术、同步辐射和反射式飞行时间质谱仪得到了Kr和Kr2的光电离质谱和光电离效率谱,确定了Kr和Kr2的电离能,利用Gaussian-03程序中的MP2(Full)/6-31G*,QCISD/cc-pVTZ以及B3LYP/6-31G方法优化了Kr2的结构,计算了它们的振动频率和电离能,计算结果显示:当采用相同的理论水平和皋组时,随着Kr同位素质荷比(m/z)的增大,它们结构和电离能保持不变,而振动频率逐渐变小.与此同时,用G2方法计算了Kr(84)和Kr2(168)的电离能,它们的电离能的理论值与实验结果符合得比较好.     

p,在北京谱仪(Ⅱ)中的行为研究

从MonteCalor模拟和北京谱仪 (BESⅡ )所取的实验数据入手 ,分析了p和 p产生次级带电径迹和中性径迹的几率以及好径迹选择条件对这些次级径迹的去除情况、p在探测器中的能量损失和 p的湮没、p和 p在桶部簇射计数器中沉积能量的分布以及 3种不同的粒子鉴别方法的优劣 .给出了BES目前可以正确重建出的p和 p的动量的最小值和利用TOF和dE dx的联合信息鉴别p和 p的优越性 .     

氧化铝模板上定向纳米碳管的快速生长及超声切短

在阳极氧化铝（AAO）模板上电沉积催化剂,快速生长了定向纳米碳管,纳米碳管以顶部生长模式生长.采用了超声的方法来切短露头于AAO模板的纳米碳管,增加纳米碳管膜的定向性.结果显示随着超声时间的增加,纳米碳管的定向性增加.位于纳米碳管膜顶部的催化剂在碳管切短的同时被去除,得到了顶部开口的纳米碳管.解释了纳米碳管被超声切短的机理.     

TiSe2纳米管的制备和表征

The ball-milled mixture of Ti and Se powders was carried out a solid-phase reaction at 600℃.The asprepared sample had been characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and high-resolution transmission electron microscopy(HRT EM).The result shows that the products are multiwalled TiSe₂ nanotubes with open-ended tips,which are about 15nm in outer diameter,several micron in lengths,and 0.6nm of interlayer spacing.     

二乙基锌的同步辐射真空紫外光电离光解离

利用同步辐射光源和反射式飞行时间质谱, 在超声冷却条件下对二乙基锌(ZnC4H10)进行真空紫外(VUV, 能量范围为8-22 eV)光电离光解离研究. 实验获得ZnC4H10的光电离质谱图; 通过测量各碎片离子的光电离效率(PIE)曲线, 获得ZnC4H10的电离势(IP=8.20±0.05 eV)及其碎片离子(ZnC2H5+、ZnH+、Zn+、C2H5+、C2H3+等)的出现势. 根据实验结果, 并结合相关文献所给的热力学数据, 推导出这些主要碎片离子的生成焓, 并分析它们可能的解离通道和主要离子的分支比. 结果表明, 其主要解离通道是母体离子发生Zn—C 键的断裂形成ZnC2H5+和C2H5+离子, ZnC2H5+离子再进一步解离形成Zn+离子, 并且含锌碎片离子的丰度占75%以上.     

碳酸氢铵与氯化钇反应及结晶产物的组成和晶相类型

The relationships of crystal type, crystallization speed, purity, grain size and shape of rare earth carbonate with precipitation and crystallization conditions are very important for the production of rare earth carbonate with high efficiency, high quality and low cost. It is necessary for us for further understand the crystallization process mechanism and the factors effect on the crystallization. In the present paper, the crystallization characteristic, composition and crystal phase type of yttrium carbonates or ammonium yttrium carbonates precipitated from yttrium chloride solution using ammonium bicarbonate as precipitant were determined by chemical analysis, X-ray powder diffraction and the pH situ-determination. It was found that the crystal phase type was dominated by the feed molar ratio of ammonium bicarbonate to yttrium chloride, and the crystallization speed and the crystal composition were also influenced by temperature, feed manner and aging period etc. When precipitating and aging under lower temperature, crystallization is easy to take place in the high feed molar ratio zone, and when increasing tempera-ture, crystallization will take place both in lower and higher feed molar ratio zones. The results show that spherical yttrium carbonate with tengerite type crystal phase can be formed within the temperature 30～70℃ when feed molar ratio of ammonium bicarbonate to yttrium chloride is less than 4, and that a rhombus flake crystal, which possesses the composition of ammonium yttrium quasi-double carbonate and a new XRD pattern, is formed when the feed molar ratio is over 4. Their compositions can be represented as (NH₄)_aY(CO₃)_b(OH)_c·nH₂O, a< 1, 1< b< 2, c=3+a-2b. A fine crystal of ammonium yttrium double carbonate with the formula of (NH₄)Y(CO₃)₂·H₂O can also be obtained as using an enough amount of ammonium bicarbonate and aging enough time.     

水菱钇型碳酸钕的形成及聚甘油脂肪酸酯对结晶的影响

Amorphous Neodymium carbonate was prepared by the precipitation reaction of neodymium chloride with ammonium bicarbonate in solution, and then aged at 60 ℃ to form crystalline neodymium carbonate. The feed molar ratio of n_(NH4HCO3)/n_(NdCl3 was 2.5, and the precipitation was carried out with or without addition of polyglyceryl fatty acid ester (PGFAE). The phase type and morphology of crystalline neodymium carbonates were examined by XRD and SEM, and the effect of PGFAE on the crystallization speed was investigated by volume change in deposit layer and in situ pH determination. The content of neodymium and chloride in crystals was analyzed, and the crystallization reaction or crystal growth characteristics were discussed. It was found that all the crystalline neodymium carbonates were tengerite type, and contained less crystalline water and chloride than that of lanthanite type neodymium carbonate crystallized at room temperature, which is beneficial to the production of neodymium carbonate with higher neodymium and lower chloride content. The addition of PGFAE not only could eliminate the foam formed during precipitation, but also could shorten crystallization time, and form large radiative-like shape conglomeration by the irregulative linkage of one dimension needle crystals. It is also suggested that the morphology and the chloride content of neodymium carbonate were dependent on the structure and crystal growth characteristics.     

Performance testing of a long-strip two-end readout multi-gap resistive plate chamber

Multi-gap Resistive Plate Chamber (MRPC) is a new generation of gas detector with good tim-ing and spacial resolution, whose technique is widely applied in some recent high energy (nuclear) physics experiments. In this letter, we report a long-strip two-end readout MRPC and its test beam performance. The measurements show that the long-strip performs a transmission line characteristic and the impedance is independent of the length of strip. The MRPC module we developed is presented to gain a timing resolution of～80 ps and a spacial resolution of ～6.4 mm. The possible application of the MRPC is also discussed.