镍氢动力电池用AB5型贮氢合金热处理工艺的研究

本文对镍氢动力电池用AB5型纳米晶贮氢合金热处理工艺进行了研究.分别采用X射线衍射、金相、PCI测试手段分析热处理后贮氢合金的微观结构与吸放氢动力学性能.贮氢合金的电性能测试结果表明,经过950℃×6 h热处理的贮氢合金,10C放电比容量可以达到241mAh/g,循环寿命大于500次,分别以7C,10C放电,高倍率放电率(HRD)为92.5%,85.2%.将贮氢合金粉组装成电池进行测试,2min后,放电平台电压为1.143V,以10C放电,300次循环后,电池容量衰减率较小.     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨     

Separation of salidroside from Rhodiola crenulata by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was used to purify salidroside from an extract of Rhodiola crenulata with two steps using a two-phase solvent system composed of ethyl acetate-n-butanol-water (1:4:5, v/v) in the first run and chloroform-methanol-isopropanol-water (5:6:1:4) in the second run. The method yielded 21.9 mg of salidroside from 1.216 g of the crude sample at 98% purity determined by HPLC analyses. Identification was performed by 1H NMR, 13C NMR, and MS.     

环己硅烷类液晶化合物的量子化学研究

运用AM1和PM3两种SCF-MO方法，通过能量梯度全优化计算，给出20种环己硅烷类（苯基乙烷系）液晶化合物的稳定几何构型、电子结构和基本性质．联系有机电子结构理论进行了细致的讨论．     

Complete assignments of 1H and 13C NMR data for 10 phenylethanoid glycosides

Ten phenylethanoid glycosides, including two new ones, isolated from the aerial parts of the mangrove plant Acanthus ilicifolius were identified. The first complete assignments of the 1H and 13C NMR chemical shifts for these glycosides were achieved by means of 2D NMR techniques, including 1H-1H COSY, TOCSY, HSQC and HMBC spectra.     

SAPO－5，－11和－34分子筛模板剂的脱除及其结构的热致变化

用水热法合成了ＳＡＰＯ－５，－１１和－３４硅磷酸铝类分子筛。并对经不同温度焙烧处理的样品进行表征，结果表明：分子筛中模块剂的热分解过程与其结构和孔大小有较大的关系。在ＳＡＰＯ－５和ＳＡＰＯ－３４分子筛中，外部联接的Ｔ－Ｏ－Ｔ键的反对称伸缩振动峰（１２４０ｃｍ~（－１）－１０３８ｃｍ~（－１））和其对称伸缩振动（７３４ｃｍ~（－１）－６００ｃｍ~（－１））及双环的变形振动（６００－５００ｃｍ~（－１））的吸收峰对样品的结晶度比较敏感。但在ＳＡＰＯ－１１中，分子筛骨架中Ｔ－Ｏ－Ｔ反对称伸缩振动（１２２５ｃｍ~（－１）和１０３８ｃｍ~（－１））随结晶度的下降而基本保持不变，但内四面体（ＴＯ_４）的对称伸缩振动，反对称伸缩振动峰及Ｔ－Ｏ弯曲振动峰随样品焙烧温度的升高而减弱并分裂。红外吸收带向低频方向移动。ＳＥＭ－ＥＤＡＸ结果表明：随样品焙烧温度的升高，结晶度下降，分子筛晶形变得不规则，晶面越来越粗糙，但结晶度的下降并非由于其中ＰＯ_４四面体的热分解所引起，而是由外部联结的Ｔ－Ｏ－Ｔ键的断裂，双环被破坏及骨架元素间的重排所引起。     

ZrO2对合成二甲醚双功能催化剂表面结构及催化性能的影响

采用共沉淀沉积法制备了Cu基双功能催化剂，并进行了合成气一步法制取二甲醚实验．XRD、XPS以及BET表征结果表明，催化剂中ZrO2以无定形状态存在，且随着其含量的增加，Zr^4 逐渐溶进CuO晶格，两者之间的电子交换使得Cu^2 在活化过程中很难被彻底还原为Cu^0，而是以Cu^0/Cu^ 的形式共存．活性评价结果表明，Cu^ 离子表现出优异的CO转化率和DME选择性．同时，ZrO2的存在能有效调节催化剂表面的Cu／Zn摩尔比以及促进Cu元素在表面的富集，从而改善催化剂性能．     

红厚壳属植物化学成份及药理活性研究进展

综述了近年来对红厚壳属植物中的化学成分及药理活性研究，重点讨论了18种 红厚壳属植物中Zhao吨酮类，香豆素类，黄酮类和萜类的化学成分，并讨论了它们 的药理活性。