Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Borate adsorption at Pt(111) in acidic medium

The adsorption/desorption process of borate was studied at Pt(111) in acidic solution by cyclic voltammetry. A so-called butterfly wave in the cyclic voltammogram of Pt(111) in HClO₄ shifted to negative direction upon the addition of boric acid with the disappearance of its sharp spikes. The shift in potential was found to be −57 mV with a tenfold increase of boric acid concentration. This illustrates that this anomalous wave is due to borate adsorption/desorption by a one-electron transfer process. The borate adsorption/desorption wave was observed to shift by −63 mV/pH. At pH>3, the anomalous wave splits forming two separate waves, depending on the pH and the scan rate. The appearance of two waves is assigned to the change in the adsorption mode of borate or the participation of OH in the adsorption process.     

Coordination of solvent molecules to VO(acac)<Subscript>2</Subscript> complexes in solution studied by hyperfine sublevel correlation spectroscopy and pulsed electron nuclear double resonance

Interactions and binding sites of the solvent molecules chloroform and ethanol to bis(acetylacetonate)oxovanadium(IV) (VO(acac)₂) complexes in (frozen) solutions have been investigated by pulsed electron nuclear double resonance, sum peak electron spin echo envelope modulation and hyperfine sublevel correlation spectroscopy. The experimental proton hyperfine coupling data of coordinating solvent molecules have been interpreted using quantum chemical calculations (density functional theory). Experimental and computed hyperfine couplings indicate that ethanol coordinates to vanadium in the equatorial plane of VO(acac)₂ and chloroform interacts via hydrogen bonding to oxygens of the acac ligands.     

含松香骨架的新型手性季铵盐相转移催化剂的合成及其在不对称环氧化反应中的应用

以天然松香为原料合成了4个新型手性季铵盐类相转移催化剂, 并用于催化不对称查尔酮环氧化反应, 发现这类手性相转移催化剂可以有效地催化查尔酮的不对称环氧化, 环氧化产物ee最高达20%.     

Two new compounds derived from bufalin

The biotransformation of bufalin by cell suspension cultures of Platycodon grandiflorus was investigated and two new biotransformed products were obtained,which was 3-epi-telocinobufagin and 3-epi-bufalin-3-O-β-D-glucoside.     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE-EC). CE was performed in 0.20 mol L(-1) phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-microm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 micromol L(-1); detection limits (S/N = 3) were 0.03-0.13 micromol L(-1). The proposed method has been successfully used to analyze real biological samples.     

Effect of Ce<Superscript>3+</Superscript> on spectral characteristic of D1/D2/Cytb559 complex from spinach

It was studied by spectroscopy that PSII reaction center complex consisting of three polypeptides, D₁, D₂ and Cytb559, were purified from PSII particle of CeCl₃ treated spinach. The results of the experiment show that Ce³⁺ could improve the growth of spinach, and accelerate electron transport of PSII particles. Of chl-a of UV-Vis spectrum of D1/D2/Cytb559 complex, Soret band was blue-shifted by 3 nm and Q band by 2 nm, respectively, and the fluorescence emission peak was blue-shifted by 5 nm in CeCl₃-treated spinach compared with the one in control. By the extended X-ray absorption fine structure (EXAFS) spectroscopy methods, it has been found that Ce³⁺ is coordinated with 8 nitrogen atoms in the first coordination shell with Ce-N bond length of 0.253 nm, and Ce³⁺ with 6 oxygen atoms in the second coordination shell with Ce-O bond length of 0.32 nm. However, the secondary structure of D1/D2/Cytb559 complex by circular dichroism (CD) spectroscopy has no significant change after CeCl₃ treated. It might be that Ce³⁺ binds to porphyrin rings of chlorophyll and oxygen of amino acid residue of polypeptide in D1/D2/Cytb559 complex, and then accelerates the primary reaction of PSII, intensifies function of P680⁺ primary electron donor of D1/D2/Cytb559, but there is little change in conformation of PSII reaction center complex.     

Orientation control of perovskite thin films on glass substrates by the application of a seed layer prepared from oxide nanosheets

Orientation control of perovskite compounds was investigated by the application of a seed layer prepared from oxide nanosheets. An aqueous suspension of oxide nanosheets was prepared by the exfoliation of a layered compound of KCa₂Nb₃O₁₀ oxide grains. A seed layer composed of (TBA)Ca₂Nb₃O₁₀ nanosheets (TBA = tetrabutylammonium) was formed on a glass substrate by simply dip coating it in the suspension. Two kinds of perovskite compounds, LaNiO₃ (LNO) and Pb(Zr,Ti)O₃ (PZT) with a preferred orientation of (00l) were successfully grown on this seeded glass substrate. In this study, the relation between lattice mismatch and electrical properties is investigated. A large, oriented PZT film with a size of 5 ×4 cm shows an improved P-E hysteresis behavior by use of this orientation control.     

Exterior square gamma factors for cuspidal representations of $$\mathrm {GL}_n$$ GL n : simple supercuspidal representations

We compute the local twisted exterior square gamma factors for simple supercuspidal representations, using which we prove a local converse theorem for simple supercuspidal representations.

     

Safety Stock Determination with Serially Correlated Demand in a Periodic-Review Inventory System

We consider a periodic-review inventory replenishment model with an order-up-to-R operating doctrine for the case of deterministic lead times and a covariance-stationary stochastic demand process. A method is derived for setting the inventory safety stock to achieve an exact desired stockout probability when the autocovariance function for Gaussian demand is known. Because the method does not require that parametric time-series models be fit to the data, it is easily implemented in practice. Moreover, the method is shown to be asymptotically valid when the autocovariance function of demand is estimated from historical data. The effects on the stockout rate of various levels of autocorrelated demand are demonstrated for situations in which autocorrelation in demand goes undetected or is ignored by the inventory manager. Similarly, the changes to the required level of safety stock are demonstrated for varying levels of autocorrelation.