Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

茶叶中乙酰甲胺磷及甲胺磷对映体的气相色谱法分离与测定

建立了乙酰甲胺磷、甲胺磷对映体在茶叶基质中的手性拆分与定量方法。比较了2种手性柱对乙酰甲胺磷及甲胺磷对映体的分离效果,并对分离效果较优的BGB-176手性柱进行色谱条件优化。茶叶样品经改良QuEChERS法处理后,气相色谱测定,外标法定量。在0.04,0.08,0.4 mg/kg 3个加标水平下,甲胺磷、乙酰甲胺磷的回收率分别为58.3%~66.4%和50.8%~57.6%,相对标准偏差(n=5)均小于7%。方法检出限为0.003~0.01 mg/kg。该方法简便、可靠,满足分析要求。通过实际样品的检测,发现乙酰甲胺磷、甲胺磷对映体在茶树上存在一定的降解差异。     

可见光铋系光催化剂的研究进展

当前工业发展导致了严重的能源和环境危机,光催化为这一难题提供了有效的解决方案.然而在实际应用中,传统氧化物光催化剂宽的带隙限制了它的可见光吸收,于是窄带隙光催化剂成为了研究的热点.其中铋系光催化剂以其高的可见光光催化活性引起了人们的广泛关注.因此本文介绍了铋系光催化剂的种类、制备、形貌、复合、性能等方面的研究现状,并展望了含铋可见光催化剂发展前景.     

具有优异甲醇催化氧化性能的Pt/MoO3-WO3/CNTs催化剂

以聚二烯丙基二甲基胺盐酸盐(PDDA)为连接剂,采用原位自组装方式将MoO3和WO3负载到碳纳米管(CNTs)上,然后通过乙二醇还原法负载Pt纳米颗粒,得到Pt纳米颗粒均匀分布的Pt/MoO3-WO3/CNTs催化剂.当氧化物总量控制在10 wt%,MoO3与WO3摩尔比为1:0.5时,Pt/MoO3-WO3/CNTs催化剂催化甲醇氧化活性最高,甲醇氧化峰电流If高达835 A/gPt.WO3和MoO3的加入提高了催化剂的甲醇氧化活性、抗CO中毒能力和稳定性,使得Pt/MoO3-WO3/CNTs催化剂表现出优异的甲醇电催化氧化性能.     

石墨烯负载的金属氧化物纳米颗粒的可控制备及催化性能

采用直接浸渍法、过氧化氢均相氧化沉积法和氨水催化水解法制备了石墨烯负载的铁、钴、镍金属氧化物纳米颗粒.研究了三种沉积方法对颗粒尺寸分布的影响;采用透射电子显微镜、傅里叶变换红外光谱、X射线衍射和X射线光电子能谱表征了催化剂的形貌与结构.用过氧化氢均相氧化沉淀法可制得粒径分布最均匀的纳米颗粒.过氧化氢的氧化作用可使石墨烯表面的氧化基团含量最大化,为纳米颗粒提供了足够的吸附与成核点.氨水加速了金属离子的水解与成核,导致纳米颗粒的粒径增大与不均.以苯甲醇氧化为探针反应考察了催化剂的性能.催化剂的活性按以下顺序逐渐下降:过氧化氢辅助沉积法>直接浸渍法>氨水催化水解法,与纳米颗粒尺寸增长趋势一致.纳米催化剂颗粒尺寸与其活性的良好关联性显示,发展石墨烯负载尺寸可控的纳米催化剂的方法具有重要意义.     

Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

A New Near-Infrared Neutral pH Fluorescent Probe for Monitoring Minor pH Changes and its Application in Imaging of HepG2 Cells

A new near-neutral pH near-infrared (NIR) fluorescent probe utilizing a fluorophore–receptor molecular framework that can modulate the fluorescence emission intensity through a fast photoinduced electron transfer process was developed. Our strategy was to choose tricarbocyanine (Cy), a NIR fluorescent dye with high extinction coefficients, as a fluorophore, and N-methylpiperazine (MP) as a receptor. The pH titration indicated that MP-Cy can monitor the minor physiological pH fluctuations with a pKa of ～7.10 near physiological pH, which is valuable for intracellular pH researches. The probe responds linearly and rapidly to minor pH fluctuations within the range of 3.05–7.10 and exhibits strong dependence on pH changes. As expected, the real-time imaging of cellular pH and the detection of pH in situ was achieved successfully in living HepG2 cells by this probe. It is shown that the probe effectively avoids the influence of autofluorescence and native cellular species in biological systems and meanwhile exhibits high sensitivity, good photostability, and excellent cell membrane permeability.     

Preparation and drug delivery study of electrospun hollow PES ultrafine fibers with a multilayer wall

The focus of this work was the preparation of hollow ultrafine fibers with a multilayer wall via coaxial electrospinning technology in one step and then studied their drug delivery properties. In this paper, by choosing a suitable dilute hydrophilic polymer solution as the core solution, polyethersulfone (PES) hollow ultrafine fibers with two different layers wall (porous structure layer and dense smooth layer) were formed during coaxial electrospinning process in one step. They showed good drug delivery capacity when curcumin was used as the model drug. There were much larger delivery amounts, more stable release rate, and higher utilization rate of PES hollow ultrafine fibers with a multilayer wall to curcumin than that of PES porous ultrafine fibers. Compared with porous ultrafine fibers, hollow ultrafine fibers with two different layers wall were more suitable to be used as drug delivery materials. Besides, between the two hollow ultrafine fibers with two different layers wall mentioned in this paper, there was much better drug delivery capacity for the hollow fibers produced with the core solution of PVA/DMSO. These results showed that PES hollow ultrafine fibers with two different layers wall have the potential to be used as the drug delivery materials.     

Validation of a Reference Gene (BdFIM) for Quantifying Transgene Copy Numbers in Brachypodium distachyon by Real-Time PCR

Brachypodium distachyon has been proposed as a new model system for gramineous plants with a sequenced genome and an efficient transformation system. Many transgenic B. distachyon plants have been generated in recent years. To develop a reliable fast method for detecting transgenic B. distachyon and quantifying its transgene copy numbers, a species-specific reference gene is of great priority to be validated both in qualitative PCR and quantitative real-time PCR detection. In this study, we first proved that the BdFIM (B. distachyon fimbrin-like protein) gene is a suitable reference gene in qualitative PCR and quantitative real-time PCR for B. distachyon. Fourteen different B. distachyon varieties were tested by both qualitative and quantitative PCRs, and identical amplification products of BdFIM were obtained with all of them, while no amplification products were observed with samples from 14 other plant species, suggesting that BdFIM gene was specific to B. distachyon. The results of Southern blot analysis revealed that the BdFIM gene was low copy number in seven tested B. distachyon varieties. In conclusion, the BdFIM gene can be used as a reference gene, since it had species specificity, low heterogeneity, and low copy number among the tested B. distachyon varieties. Furthermore, the copy number of inserted sequences from transgenic B. distachyon obtained by real-time PCR methods and Southern blot confirmed that the BdFIM gene was an applicable reference gene in B. distachyon.     

Microwave-assisted synthesis and antibacterial activity of derivatives of 3-[1-(4-fluorobenzyl)-1H-indol-3-yl]-5-(4-fluorobenzylthio)-4H-1,2,4-triazol-4-amine

Herein, an excellent method for the synthesis of twelve novel Schiff base derivatives containing indole and triazole assisted by microwave irradiation is reported. Compared with the conventional method, the yields increased from 59–84 % to 85–96 % and the reaction time was reduced from 24–30 h to 4–8 min. Moreover, all series of the newly synthesized Schiff bases were evaluated for their antibacterial activity. The values of minimum inhibitory concentration (MIC) and IC50 indicated that many target compounds possessed excellent antibacterial activity against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtilis.