Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

萃取动力学光度法测定活化剂铝——铝(Ⅲ)-过氧化氢-铜(Ⅱ)-邻氨基酚/氯仿体系

研究了在pH 5.5的弱酸性介质中, 利用Al(Ⅲ)对Cu(Ⅱ)催化H2O2氧化邻氨基酚显色的指示反应的活化作用.用萃取平衡控制反应时间、水相中邻氨基酚的浓度和反应进行的程度.通过在424 nm下测量有机相的吸光度,建立了萃取催化光度法测定活化剂铝的新方法.方法的线性范围为0.004～0.25 mg/L,检出限为1.6×10 -6 g/L.用于水样和茶叶中铝含量的测定,结果满意.     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

Designed nanostructured pt film for electrocatalytic activities by underpotential deposition combined chemical replacement techniques

Multiple-deposited Pt overlayer modified Pt nanoparticle (MD-Pt overlayer/PtNPs) films were deliberately constructed on glassy carbon electrodes through alternately multiple underpotential deposition (UPD) of Ag followed redox replacement reaction by Pt (II) cations. The linear and regular growth of the films characterized by cyclic voltammetry was observed. Atomic force spectroscopy (AFM) provides the surface morphology of the nanostructured Pt films. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry demonstrate that the MD-Pt overlayer/PtNPs films can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated 0.1 M H(2)SO(4). Thus-prepared Pt films behave as novel nanostructured electrocatalysts for dioxygen reduction and hydrogen evolution reaction (HER) with enhanced electrocatalytic activities, in terms of both reduction peak potential and peak current, when compared to that of the bulk polycrystalline Pt electrode. Additionally, it is noted that after multiple replacement cycles, the electrocatalytic activities improved remarkably, although the increased amount of Pt is very low in comparison to that of pre-modified PtNPs due to the intrinsic feature of the UPD-redox replacement technique. In other words, the electrocatalytic activities could be improved markedly without using very much Pt by the technique of tailoring the catalytic surface. These features may provide an interesting way to produce Pt catalysts with a reliable catalytic performance as well as a reduction in cost.     

水溶性聚合物和两亲聚合物:12.环氧乙烷-环氧丙烷无规共聚醚结构与性能的关系

来用连续加料法,以二元醇-KOH为引发剂合成一组不同组成的环氧乙烷-环氧丙烷无规共聚醚,并用核磁共振、红外光谱、示差扫描量热计和热失重等方法对其本体聚合物,用浊点和表面张力测定的方法对其水溶液,进行系统的表征。     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Recent Advances in Rare‐Earth Polypnictides

The polypnictide complexes of rare earth cations have drawn the attention of the scientific community for their uncommon bonding modes and potential applications. Herein, we present a systematic and comprehensive summary on recent advances in the field of rare earth polypnictides, focusing on their synthesis, structures, and reactivities. The structural stabilizing effects imposed by the electropositive rare earth cations as well as the reducing capability of rare earth precursors in the synthesis of these polypnictide complexes are described in this review. We also disscuss in detail the bonding interactions and coordination modes between rare earth cations and polypnictide clusters as well as the similarities and the peculiarity of some structures.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Biocomposites of covalently linked glucose oxidase on carbon nanotubes for glucose biosensor

The formation of covalently linked composites of multi–walled carbon nanotubes (MWCNT) and glucose oxidase (GOD) with high-function density for use as a biosensing interface is described. The reaction intermediates and the final product were characterized by using FT–IR spectroscopy, and the MWCNT-coated GOD nanocomposites were examined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Interestingly, it was found that the GOD–MWCNT composites are highly water soluble. Electrochemical characterization of the GOD–MWCNT composites that were modified on a glassy carbon electrode shows that the covalently linked GOD retains its bioactivity and can specifically catalyze the oxidation of glucose. The oxidation current shows a linear dependence on the glucose concentration in the solution in the range of 0.5–40 mM with a detection limit of 30 μM and a detection sensitivity of 11.3 μA/mMcm². The present method may provide a way to synthesize MWCNT related composites with other biomolecules and for the construction of enzymatic reaction-based biofuel cells and biosensors. Supported by grants from the National Natural Science Foundation of China (NSFC, No. 20125515; 90206037; 20375016) and the Natural Science Foundation of Jiangsu Province (Grant No. BK 2004210)