Effect of Coconut Protein and Xanthan Gum,Soybean Polysaccharide and Gelatin Interactions in Oil-Water Interface

We report on our study of the interactions between coconut protein extracted from coconut meat and three hydrocolloids (gelatin, xanthan gum, and soybean polysaccharide) and their interfacial adsorption and emulsification properties. We used Zeta potential, fluorescence spectroscopy scanning and ITC to investigate the interactions between a fixed concentration (1%) of coconut protein and varying concentrations of hydrocolloid. Through the interfacial tension and interfacial viscoelasticity, the interfacial properties of the hydrocolloid and coconut protein composite solution were explored. The physical stability of the corresponding emulsion is predicted through microstructure and stability analysis. Xanthan gum forms a flocculent complex with coconut protein under acidic conditions. Soy polysaccharides specifically bind to coconut protein. Under acidic conditions, this complex is stabilized through the steric hindrance of soy polysaccharides. Due to gelatin-coconut protein interactions, the isoelectric point of this complex changes. The interfacial tension results show that as time increases, the interfacial tensions of the three composite solutions decrease. The increase in the concentration of xanthan gum makes the interfacial tension decrease first and then increase. The addition of soybean polysaccharides reduces the interfacial tension of coconut protein. The addition of xanthan gum forms a stronger elastic interface film. Emulsion characterization showed that the gelatin-added system showed better stability. However, the addition of xanthan gum caused stratification quickly, and the addition of soybean polysaccharides also led to instability because the addition of polysaccharides led to a decrease in thermodynamic compatibility. This research lays the foundation for future research into coconut milk production technology.     

空间太阳电池槽式聚光热电联供系统特性分析

建立了空间太阳电池的热电联供系统在槽式聚光条件下的热电性能模型, 并与实验进行了对比.理论计算与实验结果吻合较好, 最大误差在5.1%以内, 证明了该数学模型的正确性.通过此数学模型, 从聚光镜面的光学效率与焦线宽度、导热胶的导热系数、金属平板光照面的吸收率等内部特性参数及风速、太阳直辐射等外部特性参数出发, 对所设计制造的空间太阳电池槽式聚光热电联供系统进行分析.较为全面而系统地分析了这些参数的改变对其系统的热电效率、总效率及火用效率等性能指标的影响, 其中聚光镜面的光学效率影响最大, 光学效率从0.5增加至0.95, 系统的总效率和火用效率分别增加0.9倍和0.5倍, 其余参数对性能也有较强影响.研究结果为新一轮系统装置的制作提供了优化设计基础.     

“东方经济”与中国乡村工业化的社会学机制—重访史国衡的个旧矿城研究

本文对“魁阁”社会学家史国衡1940年代在美访学期间的一部未刊稿《个旧矿城》进行了梳理与讨论。史国衡的个旧研究呈现了一个将产业、民情与治理相结合的综合进路,通过对个旧锡业兴衰的个案分析,揭示了传统“东方经济”模式的独特特征以及决定中国乡村工业化成败的社会学机制,同时也以个旧经验对现代化理论、人际关系学派等当时美国社会科学主流范式提出了反思。《个旧矿城》与另一部更为人所熟知的著作《昆厂劳工》共同构成了史国衡关于中国工业化研究的姊妹篇,“工业化的社会基础”是其中一以贯之的核心线索。对史国衡个旧矿城研究的“再发现”,有助于我们重新认识中国早期社会学的工业研究传统,同时也提示我们,当下的乡村工业化乃至乡村振兴仍然需要重视产业的社会基础,处理好经济转型与社会重组之间的辩证关系。     

Klein–Nishina Effect and the Cosmic Ray Electron Spectrum

Radiative energy losses are very important in regulating the cosmic ray electron and/or positron(CRE) spectrum during their propagation in the Milky Way. Particularly, the Klein–Nishina(KN) effect of the inverse Compton scattering(ICS) results in less efficient energy losses of high-energy electrons, which is expected to leave imprints on the propagated electron spectrum. It has been proposed that the hardening of CRE spectra around 50 GeV observed by Fermi-LAT, AMS-02, and DAMPE could be due to the KN effect. We show in this work that the transition from the Thomson regime to the KN regime of the ICS is actually quite smooth compared with the approximate treatment adopted in some previous works. As a result, the observed spectral hardening of CREs cannot be explained by the KN effect. It means that an additional hardening of the primary electrons spectrum is needed. We also provide a parameterized form for the accurate calculation of the ICS energy-loss rate in a wide energy range.     

The behavior of technetium in technetium-scrubbing stage of PUREX process

Technetium decontamination factor as a function of the acidity, flow ratio, scrubbing stage number was investigated by counter-current cascade experiments or mixer-settler batch tests. Results showed that the acidity of the scrubbing acid has little influence on the decontamination factor of technetium when the acidity was kept in the range of 4.5–6 M. The most effective method to increase the decontamination factor is to lower the feed-to-acid flow ratio. Keeping other condition same the factor increased to 10.3 from 3.1 when feed-to-acid ratio changed to 4 from 5.6. The loss of uranium and plutonium can be recovered through a re-extraction technology.     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Coupled intramolecular/heterointerfacial electron transfer in polyelectrolyte-shielded Iso-type black phosphorus hetero-structure boosts oxygen reduction kinetics

Searching new structured black phosphorus (BP) and exploring intriguing functions and applications have become a hot topic so far.Here,we introduce a novel Iso-...     

ISOVALEROYL OXOKADSURANE,A NOVEL DIBENZOCYCLOOCTADIENE LIGNAN POSSESSING A SPIROBENZOPURANOID SKELETON

Isovaleroyl oxokadsurane, a novel dibenzocyclooctadiene lignan pos-sessing a spirobenzofuranoid skeleton was isolated from the stems of Kadsura coccinea.Its structure and relative configuration were determined by X-ray diffraction analysis.     

An efficient synthesis of δ-glyconolactams by intramolecular Schmidt–Boyer reaction under microwave radiation

δ-Glyconolactams were first synthesized by the intramolecular Schmidt–Boyer reaction using corresponding δ-azidosugars as starting material. The reaction could be efficiently performed in good yields of 61–69% under microwave radiation in acid condition, providing an alternative protocol to iminosugar δ-lactam.