电池热安全性表征模型及其相关技术

本文通过对Ni-MH电池充放电微量热及原位电化学等参量监测实验结果进行分析研究,建立包括可逆和不可逆过程的电池充放电电压和热耗散的模型.根据以热力学对电池体系在充放电过程的分析和目前国内不少学者从电池电极过程,充放电进程中电压和热耗散所受影响大小及其与时间的关系,获得了相关数理模型方程:E=Ef Ei,其中Ef=Eθ RT/F1n([M(H)]0 I/Ft)为理想电位,Ei=ktf为非理想电位,以及包括非电化学耗散Wch=g m×exp(k2t)的数理方程如下:     

K对Mn—Co—O的结构及氧化活性的影响

利用XRD,TPD,TFD-MS及催化氧化反应等实验技术,研究了K对Mn-Co-O的结构及氧化活性的影响。XRD结果表明,Mn-Co-O系已形成反尖晶石型的MnCo_2O_4结构;K-Mn-Co-O系中除MnCo_2O_4型结构外,还有新相KMnO_2存在。根据O_2的TPD-MS及吡啶的TPD结果,Mn-Co-O中添加适量的K能提高供氧活性和增加供氧数目,但酸中心数目减少,强度降低。K对Mn-Co—O催化剂氧化活性的影响随反应物分子结构的不同而异,对乙酸乙脂、苯甲酰氯等极性有机物的完全氧化反应,K能提高氧化活性,但对苯、正己烷等非极性有机物的完全氧化反应,K使其活性降低。     

Optimization of performance and minimization of silicate interference in continuous flow phosphate analysis

Specific reaction conditions for automated continuous flow analysis of phosphate are optimized in regard to minimizing coating and silicate interference, while maintaining high sensitivity. Use of Sb in the reagent increases sensitivity and yields absorbances with little temperature dependence. Coating can be minimized by using a final solution at a pH>0.5. At final pH of 0.78 there is maximum interference from silicate in the sample. We recommend therefore as an optimal reaction condition with minimal silicate interference, the use of Sb, a final solution pH of 1.00, room temperature for the reaction and a [H(+)]/[Mo] ratio of 70. An equation is provided to correct silicate interference in high precision phosphate determination.     

Highly effective transition structure designed catalyst for the enantio- and position-selective dihydroxylation of polyisoprenoids

[structure: see text] The chiral monocinchona derivative shown, synthesized in one step from two efficiently prepared chiral building blocks, was designed under mechanistic guidance as a catalyst for the enantio- and position-selective dihydroxylation of the terminal isopropylidene group of polyisoprenoids. Its efficacy as a synthetic reagent for this purpose was demonstrated for several different substrates.     

Novel synthesis of 2-oxo-3-butynoates by copper-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride

A general and efficient Cu(I)-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride for the synthesis of 2-oxo-3-butynoates and 2-oxo-3-butynoamides was developed. Readily available starting materials, the mild reaction conditions, wide functional group tolerance, and the obviation of stoichiometric organolithium or magnesium reagents combine to highlight this reaction.     

Structural integration of tellurium oxide into mixed-network-former glasses: connectivity distribution in the system NaPO(3)-TeO(2).

Sodium phosphate tellurite glasses in the system (NaPO(3))(x)(TeO(2))(1-) (x) were prepared and structurally characterized by thermal analysis, vibrational spectroscopy, X-ray photoelectron spectroscopy (XPS) and a variety of complementary solid-state nuclear magnetic resonance (NMR) techniques. Unlike the situation in other mixed-network-former glasses, the interaction between the two network formers tellurium oxide and phosphorus oxide produces no new structural units, and no sharing of the network modifier Na(2)O takes place. The glass structure can be regarded as a network of interlinked metaphosphate-type P(2) tetrahedral and TeO(4/2) antiprismatic units. The combined interpretation of the O 1s XPS data and the (31)P solid-state NMR spectra presents clear quantitative evidence for a nonstatistical connectivity distribution. Rather, the formation of homoatomic P--O--P and Te--O--Te linkages is favored over mixed P--O--Te connectivities. As a consequence of this chemical segregation effect, the spatial sodium distribution is not random, as also indicated by a detailed analysis of (31)P/(23)Na rotational echo double-resonance (REDOR) experiments.     

A general method for the preparation of 4- and 6-azaindoles

Nitropyridines reacted with an excess of vinyl Grignard reagent to produce 4- or 6-azaindoles. Improved yields were obtained when a halogen atom was present at the position alpha to the nitrogen atom in the pyridine ring.     

Spectrofluorimetric determination of cysteine by 5-maleimidyl-2-(m-methylphenyl)benzoxazole

A new thiol weak-fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB), gives a highly fluorescence product in the presence of Cys. In this paper, MMPB has been developed for the fluorimetric determination of cysteine (Cys). At lambda(ex)/lambda(em) = 305.6/425.6 nm, the linear range is from 0 to 3.3 x 10(-7) mol l(-1) and the detection limit (sigma = 3) of 6.2 x 10(-10) mol l(-1). The main advantage of this method lies in the relative high selectivity compared with the methods using other N-substituted maleimide type of thiol reagents, in which 0.15-fold (molar ratio) of GSH is allowed and most of other amino acids at 100-fold (molar ratio) level had no obvious effect on the results. The proposed method has been applied to the determination of Cys in real samples.     

二碘化钐还原硫代碳酸酯

在ＳｍＩ＿２－ＨＭＰＡ－ＴＨＦ－ｔ－ＢｕＯＨ体系中，硫代碳酸酯的酰硫键发生还原断裂反应，得到相应的二硫醚产物。     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.