电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

SDS胶束对孔雀绿褪色反应的影响

研究了十二烷基硫酸钠（SDS）表而活性剂胶束和预胶束对孔雀绿褪色可逆反应的影响，建立了1－1型可逆反应的胶束催化模型和预胶束催化模型，获得了胶束相中正逆反应的速率常数和预胶束的平均聚集数．结果表明，SDS胶束和预胶束对正反应有禁阻作用，而对逆反应有催化作用．     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

反相高效液相色谱法分析无机阴离子研究

本文研究了提高ＲＰ－ＨＰＬＣ测定无机阴离子的选择性的方法，设计了利用对离子试剂和背景试剂兼作ｐＨ调节剂，建立了几种分离分析系统和实际样品分析方法。     

液膜法分离钒(Ⅳ)的研究

本文用P204-兰113A-煤油组成的滤膜体系处理钒(Ⅳ)的溶液,并考察了表面活性剂、载体、外相pH值、内相酸度、起始钒(Ⅳ)浓度以及乳水比等因素对分离的影响。     

Capillary Electrophoresis of the Active Ingredients of Dioscorea bulbifera L. and its Medicinal Preparations

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of epicatechin, isovanillic acid, vanillic acid and myricetin in Dioscorea bulbifera L. and its medicinal preparations. The effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time were investigated. Under optimum conditions, the analytes could be separated in a 40 mmol L^?1 borate buffer (pH 8.7) within 15 min. A 300 μm diameter carbon disk electrode has a good response at + 0.95 V (vs. SCE) for all analytes. The response was linear over three orders of magnitude with detection limits (S/N = 3) ranging from 3.0 × 10^?8 g mL^?1 to 1.0 × 10^?7 g mL^?1. The method has been successfully applied to the analysis of real samples.     

常见饮料中痕量铝的分光光度法研究

新试剂5-溴水杨基荧光酮可在pH5.5～6.8的六次甲基四胺缓冲溶液中,与铝,溴化十六烷基吡啶形成稳定的红色三元配合物。最大吸收波长约为568nm,摩尔吸光系数高达1.7×10~5L mol~(-1)·cm~1,常见金属离子很少干扰。据此,建立了测定微量铝的方法。其线性范围为0～6μg/25ml回收率在96％～103％之间。本文测定了常见饮茶,饮料及饮水中的微量铝。     

Reduction and reconstruction of Co3O4 nanocubes upon carbon deposition

We describe a synthetic investigation on the formation of carbon nanofibers using a preshaped free-standing metal-oxide catalyst (single-crystal cobalt oxide (Co(3)O(4)) nanocubes). In reacting with acetylene (C(2)H(2)) vapor, Co(3)O(4) nanocubes are reduced and reconstructed into metallic cobalt. The resultant metal catalyst with a 2-fold symmetry leads to a bilateral base growth for carbon nanofibers. Our findings indicate that an understanding of catalyst-assisted chemical vapor deposition (CVD) mechanisms can be acquired, when the shape, size, and crystal orientation of pristine metal catalysts are made known to the CVD process. By tracing their evolutional changes in structure and composition, the shape-designed model catalysts may offer new opportunities for mechanistic investigations on the chemical reactivity of nanoparticles, general catalyst-assisted material synthesis, and metal intercalation chemistry.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.