A recyclable fluorous organocatalyst for Diels-Alder reactions

Chiral fluorous imidazolidinone catalyst 2 provides consistently high enantioselectivities in Diels–Alder reactions of dienes and ,β-unsaturated aldehydes. The catalyst can be readily separated from the reaction products by fluorous solid-phase extraction, and recovered in excellent purity for direct reuse.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Effects of antimony on the surface tension of molten silicon

The effect of antimony concentration (C(Sb)/mass%) on the surface tension of molten silicon has been determined with the sessile drop method in the temperature range from 1693 to 1773 K and in the range of the oxygen partial pressure, Po(2), in an Ar atmosphere from 10(-23) to 10(-21) MPa. The results show that the surface tension of molten silicon decreases with increasing Sb concentration in the range of C(Sb)<0.9 mass%, which indicates positive adsorption of Sb in molten silicon and can be fairly described with the Szyszkowski's equation. The maximum decrease rate of surface tension is about 65 mN m(-1) (mass% C(Sb))(-1), and the temperature coefficient of surface tension, (partial differential sigma/ partial differential T)C(Sb), increases with increasing C(Sb). The evaporation of the systems was only observed between the melting points of antimony (904 K) and silicon (1683 K), and the surface tension presents no dependence on measuring time above the melting point of silicon.     

Differential-pulse voltammetric determination of trace formaldehyde using magnetic microspheres and magnetic electrode

A new type of magnetic polymer microsphere containing acylhydrazine groups on the surface was synthesized. They can be reacted with formaldehyde to produce an electroactive adduct. Reduction of these derivatives following aggregation on a magnetic electrode is possible and is effective in the indirect determination of formaldehyde. The experimental conditions and electrode structure are discussed. Under the optimum conditions, it was found that the peak potential (Ep) of formaldehyde is -1.01 V (vs. Ag/AgCl). Formaldehyde in the range 1-1000 micrograms l-1 can be determined. The detection limit for formaldehyde is 0.3 microgram l-1 and the relative standard deviation for the determination of 100 micrograms l-1 formaldehyde was 2.26%. The method was applied to the determination of formaldehyde in environmental samples with satisfactory results.     

Cell detection based on protein array using modified glass slides

A protein array for cell detection was fabricated by spotting different antibodies on modified glass slides. Glass slides were modified to allow antibodies to be immobilized on it and to selectively bind antigens. Antibodies were specially selected with the cells to be detected as targets, which permitted target cells in samples to bind specifically to the array with little nonspecific binding. Results can be obtained by directly putting the samples onto the array for 1 h or a little longer to let the cells specifically interact with the antibodies. After washing the unbound samples away, images were observed with a microscope and captured with a CCD camera. The assessment of antibody-cell binding was evaluated by capturing red blood cells (RBCs) in human blood with blood group antibodies (anti-A and anti-B). Blood group antibodies were spotted on the modified glass slide and kept at 4<.deg> degrees C overnight for immobilization. Human blood samples diluted to different concentrations were used to examine the sensitivity and specificity of the method.     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

氧缺位铁酸盐的制备及结构与还原行为的研究

在３５８Ｋ下用２００ｍｌ／ｍｉｎ的空气氧化碱性悬浮液合成了ＭＦｅ_２Ｏ_（４＋δ）（δ≥０，Ｍ＝Ｆｅ、Ｃｏ、Ｎｉ、Ｍｎ），并在５７３Ｋ下用４０ｍｌ／ｍｉｎ的Ｈ_２还原ＭＦｅ_２Ｏ_（４＋δ）制备了氧缺位铁酸盐ＭＦｅ_２Ｏ_（４－δ）（δ＞０）。用ＸＲＤ、Ｍｓｓｂａｕｅｒ谱等测试方法对铁酸盐的结构进行了表征，考察了铁酸盐的组成及第二金属组分（Ｃｏ、Ｎｉ、Ｍｎ）对铁酸盐还原性能的影响。在Ｈ_２还原３ｈ内，铁酸盐氧缺位程度随还原时间增加而增大，晶格常数也相应增大；５ｈ以上，铁酸盐将被还原为ＭＯ－ＦｅＯ或α－Ｆｅ，晶格常数几乎不变。按Ｆｅ、Ｃｏ、Ｎｉ、Ｍｎ顺序，ＭＯ与ＦｅＯ的相互作用能力、ＭＯ－ＦｅＯ固溶体的稳定性及铁酸盐还原为ＭＯ－ＦｅＯ的能力均增强，ＭＯ－ＦｅＯ进一步还原为α－Ｆｅ的能力却减弱。     

Pt电极表面及附近水行为的现场红外反射吸收光谱电化学初探

本文用现场红外反射吸收光谱电化学方法和循环伏安法研究了Pt电极表面及附近水的行为. 据不同范围内得到的SNIFTIRS 谱中水峰的变化提出了三种可能的解释: (A)电极上水的吸附取向的改变; (B)电极附近水分子的长程有序的变化; (C)电极上水的氧化及还原, Pt-O化合物的形成导致薄层中水量的减少。     

镀金层识别及其厚度测定的X—荧光强度比值法

利用Ａｕ原子在Ｘ射线激发下所发射的Ｌβ线和Ｍ线的强度比值识别样品是镀金还是Ｋ金，同时利用这个比值测定镀金层的厚度，镀金层厚度的测定范围为０～４μｍ，测定值与标定值的相对误差小于１５％。     

双质谱测定地卟啉取代基组成的解析方法及其应用

根据卟啉标样的双质谱特征，建立一种计算卟啉环上取代基组成的方法。卟啉的平均分子结构简式衡量其取代基的组成，尤其对地质体中相同碳数的卟啉“混合物”大环外取代基的构成十分有效。