场源基本微元的对称性与场的性质

直接由标量基本微元（点源）和矢量基本微元（电流元等）的对称性和两个基本假设讨论基本微元产生的场矢量的性质。     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.     

激光穿透焊的三维数值模拟

本文对激光穿透焊进行了三维数值模拟，除考虑焊接速度影响外，还研究了Ｍａｒａｎｇｏｎｉ对流对熔池流动与传热的影响。将三维数值模拟结果与相应的二维模拟结果进行了比较，结果表明，Ｍａｒａｎｇｏｎｉ对流对熔池的形成有很大的影响，因此不可忽略。本文还给出了估计激光穿透焊中蒸气孔尺寸与焊接热效率的方法。     

位移和速度反馈的数学模型及实现方法

本文提出了位移和速度同时反馈的数学模型 .并给出了位移和速度反馈的实现方法 ,该方法用传统的差动变压器实现了位移和速度的同时反馈     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

Γ-环的Baer根、b-根与拟b-根

本文定义了Γ-环的b-理想与拟b-理想,论述了Γ-环中都有一个Baer根,一个b-根与一个拟强b-根,并且还证得了Γ-环的Baer根=b-根=拟b-根。     

Use of a long-spacer-side-chain liquid crystalline polysiloxane containing a crown ether as a stationary phase for capillary gas chromatography

A new kind of side chain liquid crystalline polysiloxane containing a crown ether with a longer spacer (PSC-11) has been prepared and coated on a fused silica capillary column. The main chroma-tographic characteristics including efficiency, polarity, and selectivity have been examined. The phase exhibits the retention properties of both liquid crystal and crown ether stationary phases and possesses higher efficiency and better selectivity than PSC-3, which has a shorter spacer between the main polysiloxane chain and liquid crystalline side chain.     

The effects of flow split ratio and flow rate in manifolds

This paper reports a combined experimental and numerical investigation of three-dimensional steady turbulent flows in inlet manifolds of square cross-section. Predictions and measurements of the flows were carried out using computational fluid dynamics and laser Doppler anemometry techniques respectively. The flow structure was characterized in detail and the effects of flow split ratio and inlet flow rate were studied. These were found to cause significant variations in the size and shape of recirculation regions in the branches, and in the turbulence levels. It was then found that there is a significant difference between the flow rates through different branches. The performance of the code was assessed through a comparison between predictions and measurements. The comparison demonstrates that all important features of the flow are well represented by the predictions.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.