Simple Extraction and HPLC Determination of UV-A and UV-B Filters in Sunscreen Products

The determination of 11 organic UV filters, worldwide authorised in sunscreen formulations, was performed by HPLC with UV spectrophotometric detection. The filters determined were: phenylbenzimidazole sulfonic acid, benzophenone-4, benzophenone-3, 4-methylbenzylidene camphor, ethylhexyl methoxycinnamate, octocrylene, methylene bis-benzotriazolyl tetramethylbutyl phenol, butyl methoxydibenzoylmethane, bis-ethylhexyloxyphenol methoxyphenyltriazine, ethylhexyl triazone, and diethylamino hydroxybenzoyl hexyl benzoate. Three analytical methods were developed which were based on an ultrasonic extraction of the sample in methanol/1% aqueous acetic acid (70:30, v/v) or dimethylacetamide/propan-2-ol (1:1, v/v) in dependence of the water or fat-solubility of the filter, followed by HPLC separation and quantitation. HPLC was carried out using three different columns and eluting conditions. Standard calibration curves were linear for all the analytes over the concentration range 0.5–100 μg mL^?1. UV measurements were carried out at 280, 300, 310 or 360 nm with the aid of a diode array detector in dependence on the maximum absorption of each filter. Quantitative recoveries were obtained for all sunscreen compounds determined in homemade formulations. The proposed analytical procedure has been successfully applied for the analysis of commercial samples in order to check the presence of UV filters and to determine their concentration.     

An improved procedure for the conversion of indolines into indoles

The addition of a sacrificial enamine (such as indole), or of a vinyl ether (like dihydropyran) to an indoline during dehydrogenation by phenylseleninic anhydride dramatically improves the yield of the corresponding indole. This is due to scavenging of Se¹¹ phenylselenenating species.     

Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

Dielectric relaxation of poly(ester-ether-carbonate) multiblock terpolymers

The dielectric properties of a series of poly(ester-ether-carbonate) multiblock terpolymers have been investigated as a function of ether and carbonate composition in the frequency range of 10³–10⁶ Hz. The degree of polymerization of the samples was determined by viscosimetry measurements. The weight fraction, degree of crystallinity, and melting temperatures were characterized by means of x-ray diffraction and DSC methods. Dielectric behavior has been discussed in terms of Havriliak-Negami formulation. The variation of the dielectric properties with temperature has been associated with two relaxation processes: a) the -relaxation process observed at low temperature, which is associated to local motion of polar groups attached to both the soft and the hard segments, and b) the process assigned to long-range molecular motions above the glass transition temperature.     

Parameter identification of thermophilic anaerobic degradation of valerate

The considered mathematical model of the decomposition of valerate presents three unknown kinetic parameters, two unknown stoichiometric coefficients, and three unknown initial concentrations for biomass. Applying a structural identifiability study, we concluded that it is necessary to perform simultaneous batch experiments with differenitial conditions for estimating these parameters. Four simultaneous batch experiments were conducted at 55°C, characterized by four different initial acetate concentrations. Product inhibition of valerate degradation by acetate was considered. Practical identification was done optimizing the sum of the multiple determination coefficients for all measured state viariables and for all experiments simultaneously. The estimated values of kinetic parameters and stoichiometric coefficients were characterized by the parameter correlation matrix, the confidence interval, and the student's t-test at 9% significance level with positive results except for the saturation constant, for which more eperiments for improving its identifiability should be conducted. In this article, we discussekinetic parameter estimation methods.     

Rapid method for determination of phenylurea herbicides in milk

Summary A method has been developed for the determination of thirteen phenylurea herbicide residues in milk. It involves one-step solvent extraction of the milk with methanol by ultrasonication. The extract is cleaned up on an Amberchrom resin cartridge. Reversed-phase, gradient elution, high-performance liquid chromatography with UV detection at 242 nm is used to analyse the residues. The recovery of thirteen phenylurea pesticides is quantitative, ranging from 71.4% to 97.9% for the individual herbicides investigated at concentrations around 0.05 mg kg^–1 and from 65.1% to 95.6% around 0.005 mg kg^–1. The method is not associated with any of the emulsion problems common to conventional solvent extraction, which considerably reduce the sample clean-up process compared with existing methods.     

The μSR facilities at PSI

TheSR Facility Instruments presently available at PSI and the envisaged medium- and long-term developments are presented. The plans focus on further upgrades of the existing instruments and the development of new techniques using the very high fluxes becoming available at PSI, in particular the setup of a beamline with a fast kicker for muons on request (MORE) and the development of very low energy muon beams.     

How to improve transmissive optics in the very far infrared?

Conclusion We have presented the possibility to make optical coatings on quartz in the FIR and we have got a transmission coefficient as high as 97% at room temperature. It will rise probably close to 100% at liquid helium temperature where the quartz two-phonon difference processes are frozen. The use of polyethylene or TPX is also possible to make plates and lenses. The reflectivity losses are smaller because the refractive index is much smaller, but they cannot be further reduced by any coating because there is no transparent material with n1.2 in the FIR. These lenses are very useful in the FIR (except around 60 cm^–1 if they are made of polyethylene). TPX is quite transparent over the whole FIR range, and also in the visible with nearly the same refractive index as in the FIR. Alignments can be made with visible light, and still work in the FIR.