Nanostructured silver thin films deposited by pulsed laser ablation

Nanostructured thin films were deposited by excimer laser ablation of silver targets in controlled atmospheres of He and Ar. The film structural properties were investigated by means of scanning electron microscope and transmission electron microscope imaging. The film growth mechanism was identified as the result of coalescence of nanometric clusters formed during plume flight. Cluster formation involves plume confinement as a consequence of the increased collisional rate among plasma species. Fast photography imaging of the laser-generated silver plasma allowed to identify plasma confinement, shock wave formation and plasma stopping.     

Enhanced localization of light in slow wave slot photonic crystal waveguides

A flexible design of slot photonic crystal waveguide with a wide comb is investigated. Introduction of a carefully designed comb within the photonic crystal waveguide allows an accurate dispersion engineering in order to achieve slow light and increase the optical confinement within the comb. The strong light confinement results in an extremely small nonlinear effective area around 0.015 μm². We report experimental realization of a comb photonic crystal waveguide with measured group indices higher than 100 in a Mach-Zehnder interferometer configuration and extract losses limited to 3.7?dB for a 100?μm device at n_g=37.     

Ab initio investigation of the electronic and vibrational properties for the (CaLi)+ ionic molecule

A wide adiabatic study has been performed for numerous electronic states of CaLi⁺ molecular ion. The adiabatic potential energy curves and their spectroscopic constants (R_e, D_e, ω_e and T_e) have been calculated using an ab initio approach including a nonempirical pseudo-potential for the Ca and Li cores with the core polarisation potentials operator through full configuration interaction (FCI). Thereafter, the energies of vibrational levels and their spacing for all these states have been reported. In addition, the electric dipole moment curves have been investigated for the (1-19) Σ, (1-12) Π and (1-8) Δ electric states. Moreover it lets us check the extreme transition dipole moments (TDM). These behaviours of TDM are more accustomed to estimate the radiative lifetimes for all vibrational levels in 2¹Σ⁺ and 3¹Σ⁺ states. Also, the bound-bound and the bound-free contribution have been calculated precisely and by employing a Franck–Condon (FC) approximation.     

The μSR facilities at PSI

TheSR Facility Instruments presently available at PSI and the envisaged medium- and long-term developments are presented. The plans focus on further upgrades of the existing instruments and the development of new techniques using the very high fluxes becoming available at PSI, in particular the setup of a beamline with a fast kicker for muons on request (MORE) and the development of very low energy muon beams.     

Structural and optical properties of pulsed laser deposited ZnO thin films

Nanocrystalline ZnO thin films were grown by means of pulsed laser deposition. The ablation process was carried out at relatively low background oxygen gas pressure (10 Pa) and by varying the substrate temperature up to 600 °C. Information on the structural and morphological properties of the deposited thin films have been obtained by means of X-ray photoelectron, Raman spectroscopies, X-ray diffraction (XRD) and atomic force microscopy (AFM). The results showed that all the deposited films are sub-stoichiometric in oxygen and with a hexagonal wurtzite crystalline structure, characterized by features of some tens of nanometers in size. An improvement of the films' crystalline quality was observed for the deposition temperature of 300 °C while the further increase of the deposition temperature up to 600 °C induces a worsening of the material's structural properties with the development of a large amount of nanoparticle's clusters. The analysis of the XRD patterns shows a growth crystallographic preferential direction as a function of the deposition temperature, in agreement with the appearance of the only E₂ optical phonon mode in the Raman spectra. Such findings are compatible with the changes observed in the photoluminescent (PL) optical response and was related to the modification of the ZnO thin film structural quality.     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

A new method to analyze copolymer based superplasticizer traces in cement leachates

Enhancing the flowing properties of fresh concrete is a crucial step for cement based materials users. This is done by adding polymeric admixtures. Such additives have enabled to improve final mechanicals properties and the development of new materials like high performance or self compacting concrete. Like this, the superplasticizers are used in almost cement based materials, in particular for concrete structures that can have a potential interaction with drinking water. It is then essential to have suitable detection techniques to assess whether these organic compounds are dissolved in water after a leaching process or not. The main constituent of the last generation superplasticizer is a PolyCarboxylate-Ester copolymer (PCE), in addition this organic admixture contains polyethylene oxide (free PEO) which constitutes a synthesis residue. Numerous analytical methods are available to characterize superplasticizer content. Although these techniques work well, they do not bring suitable detection threshold to analyze superplasticizer traces in solution with high mineral content such as leachates of hardened cement based materials formulated with superplasticizers. Moreover those techniques do not enable to distinguish free PEO from PCE in the superplasticizer.Here we discuss two highly sensitive analytical methods based on mass spectrometry suitable to perform a rapid detection of superplasticizer compounds traces in CEM I cement paste leachates: MALDI-TOF mass spectrometry, is used to determine the free PEO content in the leachate. However, industrial copolymers (such as PCE) are characterized by high molecular weight and polymolecular index. These two parameters lead to limitation concerning analysis of copolymers by MALDI-TOFMS. In this study, we demonstrate how pyrolysis and a Thermally assisted Hydrolysis/Methylation coupled with a triple-quadrupole mass spectrometer, provides good results for the detection of PCE copolymer traces in CEM I cement paste leachates.