Entanglement of Two Atoms Induced by a Fock State of Radiation Field

Considering the intrinsic decoherence proposed by Milburn, we investigate the entanglement between two two-level atoms induced by a Fock state of single-mode quantized radiation field. The time-dependent reduced density matrix of the atoms system is given explicitly. Due to the intrinsic decoherence, the atoms system will approach a stationary state, where the stationary entanglement depends on the initial states of the field and the atoms.     

基于可见与近红外光谱联用的柑桔黄龙病快速无损检测研究

黄龙病是柑桔果树的毁灭性病害,对柑桔产业危害巨大。基于模型平均理论,探讨联用可见与近红外光谱技术,提高柑桔黄龙病快速无损检测精度的可行性。采集记录柑桔叶片的可见与近红外光谱,经实时荧光定量PCR鉴别黄龙病叶片为轻度、中度和重度三类,缺素和正常样品也经PCR鉴定,共五类叶片。基于光谱直接拼接、光谱归一化拼接和模型平均三种不同策略,结合偏最小二乘判别分析(PLS-DA)和多元线性回归(MLR)方法,分别建立了柑桔黄龙病可见与近红外光谱联用无损检测模型。经比较发现,光谱联用模型的检测精度均高于可见或近红外单一检测模型,且经导数处理后的光谱直接拼接PLS-DA模型检测精度最高,模型预测相关系数为0.97,预测均方根误差为0.67,模型总误判率为3%,其原因是导数消除了光谱的基线漂移。光谱归一化拼接的PLS-DA模型检测精度次之,模型总误判率为7%。可见与近红外模型平均的检测精度最低,模型总误判率为7.2%。实验结果表明,联用可见与近红外光谱,结合光谱拼接方法,提高了柑桔黄龙病无损检测模型的检测精度,研究可为其他领域的光谱联用提供参考依据。     

离体龋齿的光热锁相成像检测试验

牙齿龋损是人类一种广泛存在的口腔疾病,如何能够尽早的发现早期龋齿,对患者牙齿龋损的预防与治疗具有重要意义。介绍了基于光热效应的光热锁相热成像技术,光热锁相热成像技术具有无损伤、高效率及探测面积大等优势被广泛应用于各类材料的无损检测。基于光热锁相热成像技术原理对人为模拟龋损的人类离体牙齿组织进行成像检测试验研究。首先开展了对不同模拟龋损位置离体牙齿的光热锁相成像试验,采用防酸指甲油对牙齿组织测试面进行开窗受控龋损(开窗大小为5 mm×5 mm),其中模拟龋损部位分别选择在牙齿组织的邻接面及牙颌面。试验结果显示,牙齿组织模拟龋损位置热波幅值增大,相位滞后增大且光热锁相成像的幅值图与相位图与X射线成像相比对模拟龋损部位表现出高敏感及高特异性;光热锁相成像技术对邻接面龋损比牙颌面龋损具有较高特异性。其次开展了对平滑面牙齿组织样本的多天(0,1,2,4及6 d)模拟龋损光热锁相成像跟踪试验研究,牙齿组织龋损程度采用X射线方法进行量化。试验结果表明,当龋损时间小于6 d时,X射线方法无法对龋损位置进行有效识别,而采用光热锁相热成像技术检测模拟龋损1 d的牙齿组织时,幅值差为3.82,相位差为10.57°,证明光热锁相热成像方法对牙齿组织龋损具有较高敏感性。提取的光热锁相成像幅值与相位与龋损时间具有良好的相关性。     

两种测试高温超导薄膜微波表面电阻方法的讨论

介绍两种工作在12GHz附近的高温超导薄膜微波表面电阻Rs测试系统,并分析各自的特点.同时简介电子科技大学在提高Rs测试精度上所作的一些改进.     

盐酸托哌酮的NMR研究

应用1D NMR和脉冲梯度场2D NMR技术深入研究盐酸托哌酮的溶液结构,对其¹H和¹³C NMR化学位移进行全归属,并讨论其立体化学.     

二氢黄酮类化合物的核磁共振碳谱模拟研究

采用表征分子内部化学微环境的结构描述子原子电负性作用矢量(Atomic Electronegativity Interaction Vector, AEIV)对255个共振碳原子进行了结构表征,应用多元线性回归技术建立了结构描述子AEIV与这些碳原子的¹³C NMR化学位移的定量相关模型.该定量结构谱图关系(定量构谱关系/QSSR)模型的复相关系数达到R_MM=0.915,标准偏差为SD_MM=14.879. 采用留一法交互检验的结果为R_CV=0.909,SD_CV=15.324. 结果表明,模型具有良好的估计力和稳定性.     

Research on speckle noise of laser Doppler velocimeter for the vehicle self-contained navigation

A novel multipoint layer-type laser Doppler velocimeter (MLLDV) is designed to measure the velocity of a vehicle for the self-contained navigation system. In order to investigate the speckle's influence on the Doppler spectrum, formulas of time-lagged covariance and speckle broadening were derived for our MLLDV. Simulations and experiments are made for detailed analysis. The results show that the time-lagged covariance of photocurrent is directly proportional to the incident angle, and is inversely proportional to the elevation fluctuation of the ground together with the velocity of the vehicle. Speckle broadening is a function of the vehicle's velocity, the 1/e² Gaussian spot radius and the phase correlation length of the ground. For our MLLDV, Doppler frequency and Doppler broadening are both directly proportional to the velocity of the vehicle. Besides, the ratio between Doppler broadening and the corresponding Doppler frequency is about 0.72% when the speed of the vehicle varies from 0 to 9.6 m/s.     

Beam dynamics studies of the photo-injector in low-charge operation mode for the ERL test facility at IHEP

The energy recovery linac test facility （ERL-TF）, which is a compact ERL-FEL （free electron laser） two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector that started with a photocathode direct-current gun has been designed. In this paper, optimization of the injector beam dynamics in low-charge operation mode is performed with iterative scans using Impact-T. In addition, the dependencies between the optimized beam quality and the initial offset at cathode and element parameters are, investigated. The tolerance of alignment and rotation errors is also analyzed.     

光纤化学传感技术研究近况

光纤化学传感器作为传感器的一个重要分支,结合了化学和光学的相关技术,将化学制膜、光纤技术以及化学分析中的分光光度法、拉曼光谱、荧光光谱、折射率检测等方法相融合,以其微型化,抗电磁干扰,传输信息量大,拥有自身参比等特点不断向前发展。简要综述了光纤化学传感技术研究近况和未来的发展趋势。重点对光纤pH化学传感器、光纤离子化学传感器和光纤气体化学传感器进行了介绍。简要分析了常见的敏感膜制备方法如化学键合法和溶胶凝胶(sol-gel)等方法。新型光纤——微结构光纤的出现为光纤化学传感器开辟了新的发展方向。由于其具有大的内表面积,结构设计灵活多样,光纤内部提供感应场所等特点,快速度成为光纤化学传感器的重要发展方向和研究热点。对微结构光纤衍生而来的新型光纤化学传感器进行了详细评述, 最后对光纤化学传感器的未来进行展望。     

Generation of high power laser at 1314 nm from a diode-side-pumped Nd:YLF module

We demonstrate a high power continuous-wave （CW） and acoustic-optically （AO） Q-switched 1314-nm laser with a diode-side-pumped Nd：YLF module. A maximum CW output power of 21.6 W is obtained with a diode pump power of 180 W, corresponding to an optical-to-optical conversion efficiency of 12.0% and a slope efficiency of 16.1%. In the Q-switching operation, a highest pulse energy of 3.8 mJ is obtained at a pulse repetition rate of 1 kHz. The shortest pulse width and maximum single peak power are 101.9 ns and 37.3 kW, respectively.