基于PXI总线的阵列探测器数据获取系统

描述了一种适用于阵列探测器的数据获取系统。系统基于PXI总线, 采用标准NIM插件作为前端电子学。系统软件采用C/C++语言编写, 在线分析通过调用ROOT类库实现, 系统运行在Linux操作系统下。多次测试结果表明, 系统稳定可靠, 单个ADC通道可以处理的最大事例率为40 kHz。A data acquisition system for array detectors is described. The system is based on PXI bus with standard NIM modules used as front\|end electronics. The system software is written in C/C++ language with its online analysis modules realized by ROOT class library. Several runs of the system under Linux show that it is reliable and is capable of handling event rates up to 40 k events/s for 1 ADC channel.     

Theory of modified thermally stimulated current and direct determination of trap level distribution

In order to investigate the trap level distribution in polymer films, a new method is proposed based on modified thermally stimulated current (TSC) theory and numerical calculation of the TSC measurement. In this method, a new function is defined to weight the contribution of every trap level to the external current. The demarcation energy is used to study the trap emptying process. The modified TSC theory shows that only the electrons with trap levels very close to the demarcation energy can significantly contribute to the external circuit at any instant temperature. Based on this method, the trap level distribution of the DuPont original polyimide film 100HN and nanocomposite polyimide film 100CR are investigated as an application example. The effectiveness of the method is confirmed by the experiments. The experimental results show that the trap level density in the 100CR PI films is about six times larger than that in the 100HN PI films through the investigated trap level ranges 06–1.3 eV. The increased traps in 100CR should be introduced by nanofillers, probably come from the interfaces formed between nanofillers and the polymer matrix.     

新型红色荧光粉Na2Ca4(PO4)2SiO4:Eu3+,Bi3+的制备及发光特性

用高温固相法合成了用于白光LED的Na2Ca4(1-x-y)(PO4)2SiO4:xEu3+,yBi3+红色荧光粉.研究了助熔剂H3BO3、二次煅烧时间和稀土掺杂量等制备条件对样品发光性质的影响.结果表明,在1 200℃、助熔剂H3BO3加入量为样品质量的3.8%时可得到更有利于发光的α-NCPS基质,而且掺入Eu3+、Bi3+之后,基质的晶格结构没有发生明显变化;适宜的二次煅烧时间为1.5 h.Bi3+的共掺杂可以通过能量传递大幅提高Eu3+的发光强度,当Eu3+、Bi3+的摩尔分数分别为x=0.04和y=0.01时,粉体具有最强的红光发射.表明这种荧光粉是一种可很好用于近紫外芯片的白光LED的红色荧光粉.     

TiO2分子在GaN(0001)表面吸附的理论研究

采用基于密度泛函理论的平面波超软赝势法,计算了TiO₂分子在GaN(0001)表面的吸附成键过程、吸附能量和吸附位置. 计算结果表明不同初始位置的TiO₂分子吸附后,Ti在fcc或hcp位置,两个O原子分别与表面两个Ga原子成键,Ga-O化学键表现出共价键特征,化学结合能达到7.932-7.943eV,O-O连线与GaN[1120]方向平行,与实验观测(100)[001] TiO₂//(0001)[1120]GaN一致. 通过动力学过程计算分析,TiO₂分子吸附过程经历了物理吸附、化学吸附与稳定态形成的过程,稳定吸附结构和优化结果一致. 关键词： GaN(0001)表面 2分子')" href="#">TiO₂分子 密度泛函理论 吸附     

基于企业环境自我规制的电器电子产品供应链决策与协调

电器电子产品制造商与零部件供应商环境自我规制是供应链获得竞争优势的重要战略,也是实现WEEE源头污染控制的关键。考虑供应商环境自我规制的溢出效应,构建四种不同环境自我规制模式下电器电子产品供应链成员的决策与协调模型,分析供应链成员决策和利润变化。发现分散决策时,制造商与供应商同时进行环境自我规制模式最优,单方企业环境自我规制模式次之,且企业环境自我规制不改变制造商在供应链上的利润优势。单方企业环境自我规制模式下,规制方的利润增量总是小于无规制方。与无环境自我规制模式相比,制造商环境自我规制模式下,供应商存在“敲竹杠”行为。最后,针对供应商和制造商同时进行环境自我规制模型,设计了制造商收益共享契约,激励制造商和供应商提高其环境自我规制水平,实现各企业利润的Pareto改进。     

The asymptotic limits of Riemann solutions for the isentropic drift-flux model of compressible two-phase flows

The formation of vacuum state and delta shock wave are observed and studied in the limits of Riemann solutions for the one-dimensional isentropic drift-flux model of compressible two-phase flows by letting the pressure in the mixture momentum equation tend to zero. It is shown that the Riemann solution containing two rarefaction waves and one contact discontinuity turns out to be the solution containing two contact discontinuities with the vacuum state between them in the limiting situation. By comparison, it is also proved rigorously in the sense of distributions that the Riemann solution containing two shock waves and one contact discontinuity converges to a delta shock wave solution under this vanishing pressure limit.     

磁场对非对称量子点中极化子性质的影响

采用线性组合算符和幺正变换方法研究磁场对非对称量子点中弱耦合磁极化子性质的影响.导出了非对称量子点中弱耦合磁极化子的振动频率、基态能量和基态结合能随量子点的横向和纵向有效受限长度、磁场和电子-声子耦合强度的变化关系.数值计算结果表明:非对称量子点中弱耦合磁极化子的基态能量和基态结合能随量子点的横向和纵向有效受限长度的增加而迅速增大.随回旋频率的增加而增大,随电子-声子耦合强度的增加而减小.     

HL-2Aװ���л���ѭ��������ĵ��跢�����������

为在更高参数运行的HL-2A装置上实现等离子体芯部加料,设计了一套基于G-M循环制冷机的25管弹丸注入系统。描述了该系统的构成、工程参数,给出了系统的结构设计,并对各组成部件进行热力分析计算。对枪管温度梯度的建立及控制、弹丸注入方式等进行了讨论。     

食品色素日落黄与诱惑红荧光特性的研究

应用英国Edinburgh FLS920P型稳态和时间分辨荧光光谱仪,对日落黄与诱惑红溶液进行荧光光谱的实验测量,得到日落黄荧光峰在420 nm,诱惑红荧光峰在432 nm。进一步,应用Gaussian 09W软件构建日落黄分子与诱惑红分子的基态和激发态的几何构型,基于密度泛函理论和含时密度泛函理论,完成对两种分子基态和激发态的优化和计算。优化过程中,采用MPWK泛函和6-31g(d)基组;计算过程中,采用B3LYP泛函和6-311g(d,p)基组。考虑到溶剂效应对计算结果的影响,因此在计算过程中引入了极化连续介质模型,最后计算得到日落黄的荧光峰在435 nm,与实验所得有3.57%的相对误差;计算得到诱惑红荧光峰在443 nm,与实验所得有2.55%的相对误差,两种分子荧光峰的相对误差都在允许范围之内,说明计算合理。在分析光谱特性时,发现两种分子荧光峰的产生与分子内电荷转移有关。