Topological structure of the solitons solution in SU(3) Dunne-Jackiw-Pi-Trugenberger model

By using φ-mapping topological current theory and gauge potential decomposition, we discuss the self-dual equation and its solution in the SU(N) Dunne-Jackiw-Pi-Trugenberger model and obtain a new concrete self-dual equation with a δ function. For the SU(3) case, we obtain a new self-duality solution and find the relationship between the soliton solution and topological number which is determined by the Hopf index and Brouwer degree of φ-mapping. In our solution, the flux of this soliton is naturally quantized.     

First experimental research of the bunch compressor at CAEPLI

Magnetic bunch compressor is one of the key technologies on the path to next generation accelerator driven facilities. In this paper we report the design principles and the first experimental research of the bunch compressor developed at Chinese Academy of Engineering Physics (CAEP). The length of the bunch after compressor is found to be about 0.7 ps (rms) and the peak current exceeds 500 A when operated in the optimized condition. The sensitivity of the bunch length on the phase of the acceleration field and magnetic field of the bunch compressor was also measured and analyzed.     

Single-atom Fe Embedded Co3S4 for Efficient Electrocatalytic Oxygen Evolution Reaction

Constructing atomically dispersed active sites with densely exposed and dispersed double metal-S_x catalytic sites for favorable OER catalytic activity remains rare and challenging. Herein, we design and construct a Fe₁S_x@Co₃S₄ electrocatalyst with Fe single atoms epitaxially confined in Co₃S₄ nanosheets for catalyzing the sluggish alkaline oxygen evolution reaction(OER). Consequently, in ultralow concentration alkaline solutions(0.1 mol/L KOH), such a catalyst is highly active and robust for OER with low overpotentials of 300 and 333 mV at current densities of 10 and 30 mA/cm², respectively, accompanying long-term stability without significant degradation even for 350 h. In addition, Fe₁S_x@Co₃S₄ shows a turnover frequency(TOF) value of 0.18 s⁻¹, nearly three times that of Co₃S₄(0.07 s⁻¹), suggesting the higher atomic utilization of Fe single atoms. Mössbauer and in-situ Raman spectra confirm that the OER activity of Fe₁S_x@Co₃S₄ origins from a thin catalytic layer of Co(Fe)OOH that interacts with trace-level Fe species in the electrolyte, creating dynamically stable active sites. Combined with experimental characterizations, it suggests that the most active S-coordinated dual-metal site configurations are 2S-bridged (Fe-Co)S₄, in which Co-S and Fe-S moieties are shared with two S atoms, which can strongly regulate the adsorption energy of reaction intermediates, accelerating the OER reaction kinetics.     

电子能量对沿面介质阻挡放电等离子体化学产物的影响

基于光电倍增管研制了一套无触发信号的双通道光学探测系统, 并组装了测试样机, 实现了对沿面介质阻挡放电(SDBD)等离子体约化电场的测量, 进而通过BOLSIG+软件获得了电子能量. 采用原位紫外吸收光谱和傅里叶变换红外光谱, 研究了SDBD等离子体在不同电压和频率下的化学产物的浓度变化, 并结合空气等离子体化学反应揭示了产物相互作用的微观机理. 结果表明, 电子能量能够改变电子碰撞反应的速率系数, 调控化学反应的源头活性粒子的浓度, 进而影响到化学产物的生成和猝灭.     

咪唑及其衍生物的合成研究进展

咪唑及其衍生物作为药物中间体,在生物学、医学、有机化学中占据重要位置.目前咪唑的合成方法主要包括Radziszewski法、Phillips法、溴乙醛法.咪唑衍生物的合成方法主要包括金属催化剂合成法、酸性催化剂合成法、离子液体催化剂合成法等.本文对咪唑及其衍生物的合成方法进行了总结与归纳,并阐述了各种方法的优缺点.     

γ-Fe2O3纳米颗粒尺寸及碳化气氛对碳化过程的影响

采用油酸铁热分解法制备出不同尺寸（4-19 nm）的γ-Fe₂O₃纳米颗粒,在350℃下,于5%CO/He、 5%CO/10%H₂/He和5%CO/20%H₂/He的三种气氛中,使用原位XRD反应装置研究了γ-Fe₂O₃纳米颗粒的碳化过程与物相变化规律,同时结合Raman、CO-TPR和TEM等手段对样品进行了表征。结果表明,γ-Fe₂O₃纳米颗粒完全碳化后会形成稳定比例的χ-Fe5C2和θ-Fe₃C的混合相;在相同碳化气氛下,随γ-Fe₂O₃颗粒尺寸增大完全碳化所需时间缩短,尺寸较小的γ-Fe₂O₃颗粒表面残留炭较多,会抑制碳化反应进程,碳化相中θ-Fe₃C相对含量随γ-Fe₂O₃纳米颗粒尺寸增大而增高;相同尺寸的γ-Fe₂     

液相色谱-串联质谱法检测水产品中脱氢胆酸残留

采用液液萃取和SPE净化提取水产品中的脱氢胆酸,并建立液相色谱-串联质谱的检验方法。样品以乙酸乙酯和二氯甲烷提取后采用C₁₈柱进行分离,乙腈以及超纯水为流动相洗脱,电喷雾电离负离子模式扫描,多反应监测测定,外标法定量分析。标准溶液在0.05~2 ng/mL范围内呈线性关系,相关系数大于0.99,方法定量限为0.05μg/kg,平均回收率在90.4%~110.0%,相对标准偏差在6.5%~12%。     

基于热成像仪从能量视角辨观化学反应*

“能量”是学生认识化学变化的重要维度,本实验借助手持红外热成像仪“看到”化学反应中的能量变化。在实验中通过拍摄等量的不同酸溶液与氢氧化钠溶液混合反应时的热成像图,从“温度”高低间接反映出热量变化,从宏观的能量变化建立模型,推理微观的成键、断键等过程,探究酸碱中和反应过程的放热以及弱酸电离过程的吸热,并培养学生的证据推理能力和科学探究意识。     

以天然矿物为全部硅铝源低成本绿色合成ZSM-5分子筛的研究

ZSM-5分子筛被广泛地应用于催化、吸附分离、离子交换和绿色化工等领域,但目前其合成主要是以无机化学品为硅铝源,从源头来看是非绿色化的过程.我们以热活化的硅藻土和亚熔盐活化的累托土为全部硅铝源,通过调变两种矿物的加入比例调变合成体系的硅铝比,在水热合成体系中制备ZSM-5分子筛.系统地考察模板剂用量、碱度、投料硅铝比、晶化时间等合成条件对产物结构和性质的影响,并对在最优条件下合成的ZSM-5分子筛的物化性质进行了详细地表征,结果表明：以天然矿物为全部硅铝源可以合成出具有较高结晶度、晶粒尺寸约为4 μm的六面体挛晶形貌的ZSM-5分子筛,该分子筛比商业ZSM-5分子筛具有更高的水热稳定性和更优的加氢异构性能.     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。