PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

Two modifications of the least cost per period heuristic for dynamic lot-sizing

This paper proposes two constructive heuristics for the well-known single-level uncapacitated dynamic lot-sizing problem. The proposed heuristics, called net least period cost (nLPC) and nLPC(i), are developed by modifying the average period cost concept from Silver and Meal's heuristic, commonly known as least period cost (LPC). An improved tie-breaking stopping rule and a locally optimal decision rule are proposed in the second heuristic to enhance performance. We test the effectiveness of the proposed heuristics by using 20 benchmarking test problems frequently used in the literature. Furthermore, we perform a large-scale simulation study involving three factors, 50 experimental conditions, and 100?000 randomly generated problems to evaluate the proposed heuristics against LPC and six other well-known constructive heuristics in the literature. The simulation results show that both nLPC and nLPC(i) produce average holding and setup costs lower than or equal to those of LPC in every one of the 50 experimental conditions. The proposed heuristics also outperform each of the six other heuristics evaluated in all experimental conditions, without an increase in computational requirements. Lastly, considering that both nLPC and nLPC(i) are fairly simple for practitioners to understand and that lot-sizing heuristics have been commonly used in practice, there should be a very good chance for practical applications of the proposed heuristics.     

The application of a vehicle routing model to a waste-collection problem: two case studies

In this paper we suggest a unique model for estimating the operating cost of each of three waste-collection systems. Under the traditional system, which is widely used, waste is typically collected in plastic bags and a three-man crew is needed on each vehicle. The other two systems require a one-man crew for vehicle collecting street containers. The side-loader system with fixed body automatically empties street containers into the vehicle body and empties the load at the disposal site. The side-loader system with demountable body allows the separation of the waste collection phase from transport to the disposal site, since the vehicle body can be demounted. We also present two case studies and show how the estimation of operating costs is a critical issue in decisions regarding the type of system to be used for waste collection.     

The study and applications of photochemical-dynamical gravity wave model II

A nonlinear, compressible, non-isothermal gravity wave model that involves photochemistry is used to study the effects of gravity wave on atmospheric chemical species distributions in this paper. The changes in the distributions of oxygen compound and hydrogen compound density induced by gravity wave propagation are simulated. The results indicate that when a gravity wave propagates through a mesopause region, even if it does not break, it can influence the background distributions of chemical species. The effect of gravity wave on chemical species at night is larger than in daytime.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Polyhedral <Emphasis Type="Italic">K</Emphasis><Subscript><Emphasis Type="Italic">2</Emphasis></Subscript>

 Using elementary graded automorphisms of polytopal algebras (essentially the coordinate rings of projective toric varieties) polyhedral versions of the group of elementary matrices and the Steinberg and Milnor groups are defined. They coincide with the usual K-theoretic groups in the special case when the polytope is a unit simplex and can be thought of as compact/polytopal substitutes for the tame automorphism groups of polynomial algebras. Relative to the classical case, many new aspects have to be taken into account. We describe these groups explicitly when the underlying polytope is 2-dimensional. Already this low-dimensional case provides interesting classes of groups. Received: 13 December 2001 / Revised version: 24 June 2002 The second author was supported by the Deutsche Forschungsgemeinschaft, INTAS grant 99-00817 and TMR grant ERB FMRX CT-97-0107 Mathematics Subject Classification (2000): 14L27, 14M25, 19C09, 52B20     

Singularity conjecture and constructions of Jacobi forms

This paper verifies the singularity conjecture for Jacobi forms with higher degree in some typical cases, and gives constructions for the Jacobi cusp forms whose Fourier coefficients can be expressed by some kind of Rankin-typeL-series.     

Changes in the kurtosis parameter of super-Gaussian beams passing through a spherically aberrated lens

Based on the Collins formula and irradiance moments definition, the propagation of the kurtosis parameter of super-Gaussian beams through a spherically aberrated lens is studied. Detailed numerical results are given. It is shown that, as compared with aberration-free super-Gaussian beams, the profile of spherically aberrated super-Gaussian beams can be leptokurtic, mesokurtic or platykurtic, depending on the aberration and propagation distance. The results for the spherically aberrated Gaussian beams can be dealt with as a special case treated in this paper. Finally, the advantage of our method is pointed out.     

Instability of quark matter core in a compact newborn neutron star with moderately strong magnetic field

It is explicitly shown that if phase transition occurs at the core of a newborn neutron star with moderately strong magnetic field strength, which populates only the electron’s Landau levels, then in the β -equilibrium condition, the quark core is energetically much more unstable than the neutron matter of identical physical condition.