An algorithm for decomposing a polynomial system into normal ascending sets

We present an algorithm to decompose a polynomial system into a finite set of normal ascending sets such that the set of the zeros of the polynomial system is the union of the sets of the regular zeros of the normal ascending sets.If the polynomial system is zero dimensional,the set of the zeros of the polynomials is the union of the sets of the zeros of the normal ascending sets.     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

Improved modeling and solution methods for the multi-resource routing problem

This paper presents modeling and solution method improvements for the Multi-Resource Routing Problem (MRRP) with flexible tasks. The MRRP with flexible tasks is used to model routing and scheduling problems for intermodal drayage operations in which two resources (tractors and trailers) perform tasks to transport loaded and empty equipment. Tasks may be either well defined, in which both the origin and the destination of a movement are given, or flexible, in which the origin or the destination is chosen by the model. This paper proposes methods to effectively manage the number of options considered for flexible tasks (either feasible origins for a known destination or feasible destinations for a known origin). This modeling change generates sufficient options to allow for low-cost solutions while maintaining reasonable computational effort. We also propose a new solution method that uses randomized route generation. Computational results from test cases show that these changes improve the quality of solutions by at least 5% in the test cases as compared to methods from previous studies.     

On new forms of motive differential equations of a mechanical system relative to non-inertial frame

Based on D'Alembert's principle of a mechanical system relative to non-inertial frame and by introducing the concept of the generalized inertial potential, new forms of differential equations of motion of a mechanical system with holonomic and the non-holonomic constraints relative to the non-inertial frame are obtained. The merits and demerits between our method and the Newtonian dynamic method as well as the analytic dynamic method are discussed comparatively. Finally, two examples are given to illustrate the application of the motive differential equations in the new forms.     

Refraction of light in media

The roles of the magnetic field and electric field of the light are investigated when the light is refracted in the medium. The model of the electron cloud conductor is presented. Electron cloud in a molecule is treated as a conductor and the Faraday’s Law is applied to this conductor that is in the alternating magnetic field of the light. dB _M/dt of the light gives rise to an alternating induced current on the electron cloud conductor, and the light exchanges energy, i.e. the refractive energy, with the electron cloud conductor. Formulas of refractive index, which is the ratio of light speed in vacuum to that in the medium, are derived with this model. These formulas are tested with several mediums and Langevin’s diamagnetic susceptibility of helium gas, and the results are in good agreement with the measured data. The anisotropy and the nonlinearity of the refractive index are explained with the theory described in this work. Supported by Beijing Science and Technology New Star Program (Grant No. 952870400), the Beijing Municipal Commission of Education and the Excellent Young Teachers Program of Ministry of Education of China     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

On existence of solutions for some hyperbolic-parabolic-type chemotaxis systems

In this paper, we discuss the local and global existence ofweak solutions for some hyperbolic–parabolic systems modellingchemotaxis.     

On the persistence of elliptic lower-dimensional tori in Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition

In this paper we formulate a theorem on the persistence of elliptic lower-dimensional invariant tori for nearly integrable analytic Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition, and give the measure estimates of parameters for the non-resonance conditions under Rüssmann’s non-degeneracy condition, which is essential for the proof of our result.