Nd,Ce和La改性对Ni/SBA-15催化剂在CH4/CO2重整反应中性能的影响

以稀土金属Nd,Ce或La的氧化物为助剂,采用β-环糊精浸渍法对Ni/SBA-15催化剂进行了改性,并运用X射线衍射、N₂吸附-脱附、程序升温还原和热重等手段考察了改性的催化剂在CO₂重整CH₄制合成气反应中的催化性能. 结果表明,Nd等稀土金属氧化物的添加对催化剂孔结构和晶相结构等性质影响不大,但可影响NiO的还原; Nd的添加使NiO与载体之间以Ni-Nd-O形式相互作用,促进了活性组分NiO的还原. 其中,Nd的添加量为5-10 wt%时所制备的催化剂在重整反应中的催化活性最高,且具有很强的抗积碳性能. La和Ce氧化物促进的Ni催化剂也表现出类似的性质和催化性能.     

喜树碱/氧化石墨烯/类水滑石纳米杂化物的制备及表征

采用共组装法成功制备了电中性疏水抗癌药物喜树碱（CPT）/氧化石墨烯（GO）/Mg-Al类水滑石（HTlc）纳米杂化物. 先将CPT负载于荷负电的GO纳米片表面上制备成CPT/GO复合物,再与荷正电的HTlc纳米片（HNS）共组装,形成CPT/GO/HTlc纳米杂化物,其中GO纳米片和HNS相间叠加,CPT负载于层间. 采用X-射线衍射、透射电子显微镜、原子力显微镜、扫描电子显微镜-能量色谱仪、傅里叶变换红外光谱、紫外-可见分光光度计和热重/差示扫描量热分析等技术对纳米杂化物进行了表征. 37 ℃下分别在pH 7.4和4.0的磷酸缓冲液中,考察了CPT/GO/HTlc纳米杂化物的药物释放行为. 结果表明,CPT/GO/HTlc纳米杂化物的药物释放过程符合准二级动力学方程,且具pH响应性,在酸性（pH 4.0）介质中的释放速率和释放率明显高于中性（pH 7.4）介质. 共组装法是构筑药物/ GO/HTlc纳米杂化物的简便方法,该纳米杂化物在药物输送领域具有良好的应用前景.     

Solvent extraction of uranium from aqueous solutions by α-benzoinoxime

Solvent extraction of uranium with α-benzoinoxime from aqueous solutions has been systematically investigated. The extraction equilibration was very fast and achieved at 60 s for uranium. The extraction of uranium was pH-dependent using α-benzoinoxime as extractant. The effect concentration of uranium and α-benzoinoxime was studied. The uranium loaded in the organic phase can be stripped efficiently with 93 % yield using 0.1 M HCl as the stripping agent in a single stripping step. A good selectivity for uranium was observed through α-benzoinoxime as extractant from aqueous solution with other interfering cation ions. Present study suggested that α-benzoinoxime can be used as a potential extractant for separation of uranium from aqueous solution using centrifugal extractor in industrial application.     

A theoretical investigation of low energy band gap polymers: polythiophene systems

Recently, the organic synthesis and electronic device applications of π-conjugated polymer-based materials with low energy band gap (below 2 eV) and high values of incident photon to current efficiency have been presented. In the present study, the physical properties of polythiophene (PTH) and its derivative systems (PTs) were investigated as π-conjugated low energy band gap polymers. Density functional theory with periodic boundary condition (PBC), the B3LYP functional, and the 6-31G(d) basis set was applied to determine their geometric and electronic structures and corresponding energies (E _HOMO, E _LUMO, and E _g = E _LUMO ? E _HOMO) from the monomer of thiophene and its derivatives for one-dimensional (1D) extension to polymer. The effects of 3-substitution in PTs including electron-donating (CH₃–, C₆H₁₃–, OH–, Cl–, OCH₃–, and CHO–) and electron-withdrawing groups (Cl–, CHO–, CN–, NO₂–, CF₃–, and COOH–) compared with PTH were investigated. According to the calculation results, PTs with electron-donating and electron-withdrawing substituents should exhibit red- and blue-shifts, respectively, compared with PTH. These calculation results show good agreement with experimental data and provide further information for molecular design considerations.     

Synthesis of CeO2 by thermal decomposition of oxalate and kinetics of thermal decomposition of precursor

CeO₂ was synthesized by calcining Ce₂(C₂O₄)₃·8H₂O above 673 K in air. The precursor and its calcined products were characterized using thermogravimetry and differential scanning calorimetry, Fourier transform infrared spectra, X-ray powder diffraction, scanning electron microscopy, and UV–Vis absorption spectroscopy. The result showed that cubic CeO₂ was obtained when the precursor was calcined above 673 K in air for 2 h. The UV–Vis absorption spectroscopy studies showed that superfine CeO₂ behaved as an excellent UV-shielding material. The thermal decomposition of the precursor in air experienced two steps, which are: first, the dehydration of eight crystal water molecules, then the decomposition of Ce₂(C₂O₄)₃ into cubic CeO₂. The values of the activation energies associated with the thermal decomposition of Ce₂(C₂O₄)₃·8H₂O were determined based on the Starink equation.     

Ring-opening polymerisation of ɛ-caprolactone catalysed by Brønsted acids

Two new Brønsted acids [2,2′-ethylidene-bis (4,6-di-tert-butylphenol)] phosphoric acid (EDBPPOOH) and (3,3′,5,5′-tetra-tert-butylbiphenyl-2,2′-diol) phosphoric acid (TBPO-POOH) were synthesised and fully characterised by ¹H NMR and ¹³C NMR spectra and mass spectra. The ringopening polymerisation (ROP) of ?-caprolactone (?-CL) catalysed by the two Brønsted acids proceeded at 110°C without a solvent or at ambient temperature in toluene. Experimental results indicated that the two Brønsted acids were efficient catalysts for the ROP of ?-CL with moderate number-average molar mass (Mn) and narrow polydispersity indices (PDI). The catalytic activity of TBPO-POOH is higher than EDBP-POOH in the ROP of ?-CL. After benzyl alcohol was added, it was able to accelerate the polymerisation process. The polymerisation can also occur with the addition of water with a monomer/catalyst/initiator mole ratio of 100: 1: 1. The living polymerisation was ascertained by the linear relationships of the Mn vs. monomer conversion, then it was further confirmed by a second-feed experiment of a double monomer producing double Mn. A kinetic study of the relationships between monomer concentration and time revealed a first-order dependence on monomer concentration in the polymerisation. End-group analysis of ¹H NMR spectra and electrospray-ionisation mass spectra suggests that the two Brønsted acids are capable of catalysing and initiating the ROP of ?-CL.     

Novel hydrothermal carbonization of cellulose catalyzed by montmorillonite to produce kerogen-like hydrochar

The conversion of cellulose to petroleum-like fuel is a very challenging yet attractive route to developing biomass-to-fuel technology. Many attempts have been made in liquefaction, pyrolysis and gasification of cellulose to produce fuels or intermediate chemicals. Previous studies indicate that these processes are tough. Hence, the present work is concerned with the development of new technologies for the conversion of cellulose into materials which are analogies to the precursor of petroleum. Montmorillonite-catalyzed hydrothermal carbonization of microcrystalline cellulose for the production of kerogen-like hydrochar under mild conditions was investigated. It was revealed that the hydrothermal carbonization of microcrystalline cellulose alone resulted in hydrochar with type III kerogen-like structure, whereas in the presence of montmorillonite, the hydrothermal carbonization of microcrystalline cellulose yielded a hydrochar-mineral complex, of which the isolated organic fraction was oil-prone type II kerogen-like structure. Results suggested that further improved montmorillonite-aided biomass conversion to more oil-prone kerogen-like solid products could be an alternative efficient route to obtain biofuel and chemicals.     

Biodegradable thermogel as culture matrix of bone marrow mesenchymal stem cells for potential cartilage tissue engineering

Poly（lactide-co-glycolide）-poly（ethylene glycol）-poly（lactide-co-glycolide）（PLGA-PEG-PLGA） triblock copolymer was synthesized through the ring-opening polymerization of LA and GA with PEG as macroinitiator and stannous octoate as catalyst. The amphiphilic copolymer self-assembled into micelles in aqueous solutions, and formed hydrogels as the increase of temperature at relatively high concentrations（〉 15 wt%）. The favorable degradability of the hydrogel was confirmed by in vitro and in vivo degradation experiments. The good cellular and tissular compatibilities of the thermogel were demonstrated. The excellent adhesion and proliferation of bone marrow mesenchymal stem cells endowed PLGA-PEGPLGA thermogelling hydrogel with fascinating prospect for cartilage tissue engineering.     

Micellization of anionic gemini surfactants and their interaction with polyacrylamide

A series of anionic gemini surfactants have been synthesized. The surface properties and micellization process of as-prepared sulfonate gemini surfactants (SGS) and carboxylate gemini surfactant (CGS) have been studied by surface tension measurement and isothermal titration microcalorimetry. Meanwhile, the interaction of these five surfactants with polyacrylamide (PAM) was investigated using surface tension, steady-state fluorescence measurement, and isothermal titration microcalorimetry. The results show that the critical micelle concentrations (CMCs) of above-mentioned surfactants are more than 1 order of magnitude lower than those of corresponding single chain surfactants. Moreover, the enthalpy of micelle formation (ΔH _mic) for the investigated gemini surfactants is negative. In the surfactant–PAM systems, the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SGS onto PAM is stronger than that of CGS, resulting from more compact structure of SGS aggregates. With increasing surfactant hydrophobicity, the values of ΔH _agg become more exothermic and a ΔS _agg decrease was observed. Therefore, the interaction between SGS and PAM is enthalpy-driven.     

A study on structure-performance relationship of overcharged 18650-size Li4Ti5O12/LiMn2O4 battery

The electrochemical properties and thermal generation behavior of 18650 Li₄Ti₅O₁₂/LiMn₂O₄ batteries were tested before and after overcharge. The experimental results showed that after overcharge, the specific capacity decreased obviously. The higher the current density was, the more obvious the capacity decreased. For instance, the overcharged battery had almost no capacity when the current density increased to 5C. At the same time, the overcharged battery presented a much more apparent thermal runaway trend compared to the normal battery. After measuring the electrochemical impedance spectroscopy of the batteries and characterizing the crystal structure/nanostructure of the electrode materials, these phenomena could be attributed to the following two reasons: (1) the decomposition of the electrolyte arisen from the overcharge process resulted in increased internal resistance; (2) the thermal runaway due to the increased internal resistance resulted in the damage to crystal structure/nanostructure and aggregation of the electrode materials, thus leading to the secondary decrease in capacity.