Skin Necrosis due to Photodynamic Action of Benzoporphyrin Depends on Circulating Rather than Tissue Drug Levels: Implications for Control of Photodynamic Therapy

In an ideal world, photodynamic therapy (PDT) of abnormal tissue would reliably spare the surrounding normal tissue. Normal tissue responses set the limits for light and drug dosimetry. The threshold fluence for necrosis (TFN) was measured in normal skin following intravenous infusion with a photosensitizer, benzoporphyrin derivative monoacid ring A (BPD-MA) Verteporfin as a function of drug dose (0.25-2.0 mg/kg), wavelength of irradiation (458 and 690 nm) and time interval (0–5h) between drug administration and irradiation. The BPD-MA levels were measured in plasma and skin tissue to elucidate the relationship between TFN, drug kinetics and biodistribution. The PDT response of normal skin was highly reproducible. The TFN for 458 and 690 nm wavelengths was nearly identical and the estimated quantum efficiency for skin response was equal at these two wavelengths. Skin phototoxicity, quantified in terms of 1/ TFN, closely correlated with the plasma pharmacokinetics rather than the tissue pharmacokinetics and was quadratically dependent on the plasma drug concentration regardless of the administered drug dose or time interval between drug and light exposure. This study strongly suggests that noninvasive measurements of the circulating drug level at the time of light treatment will be important for setting optimal light dosimetry for PDT with liposomal BPD-MA, a vascular photosensitizer.     

Application of Arene-Ruthenium Chemistry to a Formal Total Synthesis of OF 4949 III

A convergent formal total synthesis of OF 4949 III is described. Arene-ruthenium chemistry was used in the construction of the diaryl ether linkage in high yield, and cycloamidation under high dilution conditions (0.005 M) was achieved using DPPA as coupling reagent. SmI(2) was used to reductively remove the 2-iodoethyl ester protecting group in the presence of DMPU or HMPA.     

Synthesis and reactivity of hydrazido(2-) and imido derivatives of titanium(IV) tetratolylporphyrin

Titanium porphyrin hydrazido complexes (TTP)Ti = NNR2 (TTP = meso-tetra-p-tolylporphyrinato dianion; R = Me (1), Ph (2)) were synthesized by treatment of (TTP)TiCl2 with 1,1-disubstituted hydrazines H2NNR2 (R = Me, Ph) in the presence of piperdine. The nucleophilic character of the hydrazido moiety was demonstrated in the reactions of complexes 1 and 2 with p-chlorobenzaldehyde, which yielded the titanium oxo complex (TTP)-Ti = O and the respective hydrazones. Protonation of complexes 1 and 2 with phenol or water produced the 1,1-disubstituted hydrazine along with (TTP)Ti(OPh)2 or (TTP)Ti = O, respectively. Similar reactivity of p-chlorobenzaldehyde and phenol with (TTP)Ti = NiPr, 3, was observed. The reaction of complex 3 with nitrosobenzene cleanly formed the azo compound iPrN = NPh and the terminal oxo product (TTP)Ti = O.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Protofilaments, filaments, ribbons, and fibrils from peptidomimetic self-assembly: implications for amyloid fibril formation and materials science

Deciphering the mechanism(s) of β-sheet mediated self-assembly is essential for understanding amyloid fibril formation and for the fabrication of polypeptide materials. Herein, we report a simple peptidomimetic that self-assembles into polymorphic β-sheet quaternary structures including protofilaments, filaments, fibrils, and ribbons that are reminiscent of the highly ordered structures displayed by the amyloidogenic peptides Aβ, calcitonin, and amylin. The distribution of quaternary structures can be controlled by and in some cases specified by manipulating the pH, buffer composition, and the ionic strength. The ability to control β-sheet-mediated assembly takes advantage of quaternary structure dependent pK(a) perturbations. Biophysical methods including analytical ultracentrifugation studies as well as far-UV circular dichroism and FT-IR spectroscopy demonstrate that linked secondary and quaternary structural changes mediate peptidomimetic self-assembly. Electron and atomic force microscopy reveal that peptidomimetic assembly involves numerous quaternary structural intermediates that appear to self-assemble in a convergent fashion affording quaternary structures of increasing complexity. The ability to control the assembly pathway(s) and the final quaternary structure(s) afforded should prove to be particularly useful in deciphering the quaternary structural requirements for amyloid fibril formation and for the construction of noncovalent macromolecular structures.     

Adsorption geometry of 4-picoline chemisorbed on the Cu(110) surface: a study of forces controlling molecular self-assembly

The adsorption of 4-picoline (4-methylpyridine) on the Cu(110) surface has been studied with time-of-flight electron stimulated desorption ion angular distribution (TOF-ESDIAD) and other methods. Using deuterium labeling in the methyl group and hydrogen labeling on the aromatic ring, it has been possible to separately monitor by TOF-ESDIAD the C-D bond directions and the C-H bond directions in the adsorbed molecule. These triangulation measurements have led to a detailed understanding of the conformation of the adsorbed molecule relative to the Cu(110) crystal lattice, allowing one to witness changes in the molecular conformation as adsorbate-adsorbate interactional effects take place for increasing coverages. At low coverages, the molecule adsorbs by the N atom at an atop Cu site with the aromatic ring parallel to the <001> azimuth and with the molecular axis inclined 33 (+/- 5) degrees along the <001> azimuth. As rows of 4-picoline molecules form long range ordered chain structures oriented along the <112> azimuth, the aromatic ring twists 29 degrees about the inclined molecular axis as a result of forces between the adsorbate molecules. The initial tilting of the molecular axis at low coverage is likely due to the interaction of the positive-outward dipole with its image in the substrate. The ring twist may result from dipoleminus signdipole forces between the adsorbate molecules in the rows formed tending to form nested parallel pyridine rings. These studies are the first to apply the TOF-ESDIAD method for the measurement of the direction of chemical bonds at more than one molecular location within an adsorbed molecule and the new method is named electron stimulated desorption-molecular triangulation (ESD-MT). The results obtained give information of importance in understanding the factors which control conformational effects during the molecular self-assembly of complex adsorbed molecules on surfaces.     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.     

Molecular dimensions of polydipropylsiloxamer

The molecular dimensions of polydipropylsiloxamer were studied by intrinsic viscosity measurements in toluene and in 2-pentanone. The relationships between the molecualr weight and the intrinsic viscosity were found to be: [η]_25°C., toluene = 4.35 × 10^?4 M^0.58; [η]_θ(10°C.), toluene = 1.09 × 10^?3 M^0.5; [η]_θ(76°C.), 2-pentanone = 8.71 × 10^?4 M^0.5. This held reasonably well for molecular weights from 25,000 to 3000,000. The root-mean-square end-to-end length ratio, (r₀² /M)^1/2 as calculated from the constant K, exceeds the free rotation value by approximately 100%. The disparity is greater than that found with polydimethylsiloxamer, indicating a lower degree of flexibility for the polydipropylsiloxamer. This is largely due to the short range steric interaction between near neighboring units of the chain. Gel permeation chromatography was also employed to demonstrate the lower degree of flexibility for polydipropylsiloxamer as compared with polydimethylsiloxamer.     

Kinetics of the cis,cis to trans,trans isomerization of 1,1,2,2,5,5,6,6-octamethyl-1,2,5,6-tetrasilacycloocta-3,7-diene

The kinetics of the ruthenium-promoted cis,cis to trans,trans isomerization of 1,1,2,2,5,5,6,6-octamethyl-1,2,5,6-tetrasilacycloocta-3,7-diene were investigated. Incubation of a ruthenium alkylidene complex, (Cy(3)P)RuCl(2)(==CHPh)Ru(p-cymene)Cl(2), in CD(2)Cl(2) for 5 days at 40 degrees C afforded a catalytically active ruthenium species that was shown to be responsible for promoting the isomerization. The isomerization was observed to proceed in two steps: (1) conversion of the starting cis,cis isomer to a proposed cis,trans intermediate and (2) subsequent conversion of the intermediate to the product trans,trans isomer. Kinetic studies demonstrated that the two steps are first-order with respect to the concentrations of the cis,cis isomer, the intermediate, and the ruthenium alkylidene complex. The data were further consistent with a mechanism involving bimolecular hydride addition-elimination during the two isomerization steps.     

Imidazole-based excited-state intramolecular proton-transfer materials: synthesis and amplified spontaneous emission from a large single crystal

We have synthesized a novel class of imidazole-based excited-state intramolecular proton-transfer (ESIPT) materials, i.e., hydroxy-substituted tetraphenylimidazole (HPI) and its derivative HPI-Ac, which formed large single crystals exhibiting intense blue fluorescence and amplified spontaneous emission (ASE). Transparent, clear, and well-defined fluorescent single crystals of HPI-Ac as large as 20 mm x 25 mm x 5 mm were easily grown from its dilute solution. From the X-ray crystallographic analysis and semiempirical molecular orbital calculation, it was deduced that the four phenyl groups substituted into the imidazole ring of HPI and HPI-Ac allowed the crystals free from concentration quenching of fluorescence by limiting the excessive tight-stacking responsible for intermolecular vibrational coupling and relevant nonradiative relaxation. Fluorescence spectral narrowing and efficient ASE were observed in the HPI-Ac single crystal even at low excitation levels attributed to the intrinsic four-level ESIPT photocycle.