Vibration analysis by means of digital shearography

Digital shearography, also called digital speckle pattern shearing interferometry, is described as a robust measuring method due to its simple optical setup and the relative insensitivity against ambient noise. It has been applied for nondestructive testing and strain measuring. This paper explores its possibilities for vibration analysis. The measuring device performing both continuous (time-average method) and stroboscopic illuminations is described. The selection of the illumination mode is made by adjusting a controller and performed simply by a computer. The real-time observation with refreshing reference frame technique and the quantitative evaluation with the phase shift technique are presented. The results show this measuring device is well suited for both qualitative and quantitative vibration analysis.     

Endolaryngeal contact pressures

In this work, we present a new method for in vivo endolaryngeal contactpressure measurement with a miniature pressure transducer. Using this methodology, contact pressures can be measured during videoendoscopy at different locations between the artyenoids and also at various locations along the membranous vocal folds. Twenty adults with organic and functional voice disorders and two vocally healthy adults participated as subjects. Endolaryngeal contact pressure measures were made during a series of phonatory tasks varying pitch, loudness, and phonatory onset and offset. Measures were also made during nonphonatory tasks, including throat clearing, coughing, Valsalva maneuvres, and gagging. The most remarkable findings were: (1) interarytenoid contact pressures were considerably greater than intraglottal contact pressures; (2) interarytenoid contact pressures were greater for lower than higher pitches; (3) both interarytenoid and intraglottal contact pressures were remarkably large during hard glottal attack; and (4) overall, the largest endolaryngeal pressures were recorded between the arytenoids, during a thoracic fixation maneuver and during gag reflex.This work was supported in part by Deutsche Forschungsgemeinschaft (He 2869/1-1), by a grant from the “Verein zur Förderung hör-, sprach- und stimmgestörter Patienten an der FU Berlin e.V.” (nonprofit organization), Berlin, Germany, and by Grant No. K08 DC00139 from the National Institute on Deafness and Other Communication Disorders.     

Generation and characterization of stable, highly concentrated titanium dioxide nanoparticle aerosols for rodent inhalation studies

The intensive use of nano-sized titanium dioxide (TiO₂) particles in many different applications necessitates studies on their risk assessment as there are still open questions on their safe handling and utilization. For reliable risk assessment, the interaction of TiO₂ nanoparticles (NP) with biological systems ideally needs to be investigated using physico-chemically uniform and well-characterized NP. In this article, we describe the reproducible production of TiO₂ NP aerosols using spark ignition technology. Because currently no data are available on inhaled NP in the 10?C50 nm diameter range, the emphasis was to generate NP as small as 20 nm for inhalation studies in rodents. For anticipated in vivo dosimetry analyses, TiO₂ NP were radiolabeled with ⁴⁸V by proton irradiation of the titanium electrodes of the spark generator. The dissolution rate of the ⁴⁸V label was about 1% within the first day. The highly concentrated, polydisperse TiO₂ NP aerosol (3?C6 × 10⁶ cm^?3) proved to be constant over several hours in terms of its count median mobility diameter, its geometric standard deviation, and number concentration. Extensive characterization of NP chemical composition, physical structure, morphology, and specific surface area was performed. The originally generated amorphous TiO₂ NP were converted into crystalline anatase TiO₂ NP by thermal annealing at 950 °C. Both crystalline and amorphous 20-nm TiO₂ NP were chain agglomerated/aggregated, consisting of primary particles in the range of 5 nm. Disintegration of the deposited TiO₂ NP in lung tissue was not detectable within 24 h.     

Bragg scattering as a probe of atomic wave functions and quantum phase transitions in optical lattices

We have observed Bragg scattering of photons from quantum degenerate ^{87}Rb atoms in a three-dimensional optical lattice. Bragg scattered light directly probes the microscopic crystal structure and atomic wave function whose position and momentum width is Heisenberg limited. The spatial coherence of the wave function leads to revivals in the Bragg scattered light due to the atomic Talbot effect. The decay of revivals across the superfluid to Mott insulator transition indicates the loss of superfluid coherence.     

Antenna length and polarization response of antenna-coupled MOM diode infrared detectors

This work focuses on the fabrication and response of dipole antenna-coupled metal–oxide–metal diode detectors to long-wave infrared radiation. The detectors are fabricated using a single electron beam lithography step and a shadow evaporation technique. The detector’s characteristics are presented, which include response as a function of incident infrared power and polarization angle. In addition, the effect of dipole antenna length on detection characteristics for 10.6 μm radiation has been measured to determine resonant lengths. The response of the detector shows a first resonance at a dipole length of 3.1 μm, a second resonance at 9.3 μm, and third at 15.5 μm. The zeros intermediate to the resonances are also evident.     

An algebraic variational multiscale–multigrid method for large-eddy simulation of turbulent variable-density flow at low Mach number

An algebraic variational multiscale–multigrid method is proposed for large-eddy simulation of turbulent variable-density flow at low Mach number. Scale-separating operators generated by level-transfer operators from plain aggregation algebraic multigrid methods enable the application of modeling terms to selected scale groups (here, the smaller of the resolved scales) in a purely algebraic way. Thus, for scale separation, no additional discretization besides the basic one is required, in contrast to earlier approaches based on geometric multigrid methods. The proposed method is thoroughly validated via three numerical test cases of increasing complexity: a Rayleigh–Taylor instability, turbulent channel flow with a heated and a cooled wall, and turbulent flow past a backward-facing step with heating. Results obtained with the algebraic variational multiscale–multigrid method are compared to results obtained with residual-based variational multiscale methods as well as reference results from direct numerical simulation, experiments and LES published elsewhere. Particularly, mean and various second-order velocity and temperature results obtained for turbulent channel flow with a heated and a cooled wall indicate the higher prediction quality achievable when adding a small-scale subgrid-viscosity term within the algebraic multigrid framework instead of residual-based terms accounting for the subgrid-scale part of the non-linear convective term.     

Raman and SERS study of metoclopramide at different pH values

Conjugate acid–base forms of the drug metoclopramide were investigated by Raman spectroscopy in aqueous solutions and by surface‐enhanced Raman scattering (SERS), when the molecules were adsorbed on colloidal silver surfaces. Raman spectra were recorded at pH values below 8, metoclopramide being poorly water soluble at higher pH values. The SERS spectra of metoclopramide were recorded in the 3–11 pH range, even in spite of its low solubility at basic pH values. The Raman and SERS spectra were assigned by means of density functional theory (DFT) calculations. By monitoring several SERS marker bands, the protonated, neutral or the coexistence of both molecular species adsorbed on the colloidal silver particles could be evidenced. The adsorbate orientation was deduced to be perpendicular to the metal surface for the protonated molecular species and tilted for the neutral metoclopramide molecular species. Copyright © 2009 John Wiley & Sons, Ltd.     

DNA based molecular motors

Most of the essential cellular processes such as polymerisation reactions, gene expression and regulation are governed by mechanical processes. Controlled mechanical investigations of these processes are therefore required in order to take our understanding of molecular biology to the next level. Single-molecule manipulation and force spectroscopy have over the last 15 years been developed into extremely powerful techniques. Applying these techniques to the investigation of proteins and DNA molecules has led to a mechanistic understanding of protein function on the level of single molecules. As examples for DNA based molecular machines we will describe single-molecule experiments on RNA polymerases as well as on the packaging of DNA into a viral capsid—a process that is driven by one of the most powerful molecular motors.     

Dispersion of nanospheres on large glass substrate by amorphous or polycrystalline silicon deposition for localized surface plasmon resonance

Nanosphere lithography is a cost-effective way to fabricate noble metal nanostructures for plasmonics. However, dispersing nanospheres on a large area of glass substrate is a difficulty encountered when transparent substrate is required in applications such as localized surface plasmon resonance or surface enhanced Raman spectroscopy. Because poly(diallyldimethyl ammonium chloride) (PDDA) on silicon surface introduces a force that can disperse nanospheres on silicon, in this article, we modify the glass surface through amorphous or polycrystalline silicon deposition and thus well disperse polystyrene or silica nanospheres over a glass area of more than 2 cm × 2 cm. Transmission loss of the glass substrate caused by amorphous or polycrystalline silicon deposition is analyzed with good agreement to experimental spectra, and localized surface plasmon resonance signals generated from the gold nanostructures fabricated on these substrates are measured and yield a sensitivity of 317 nm/RIU, which prove the feasibility and effectiveness of our method.     

A polarised SUSANS facility to study magnetic systems

Using a right-angled magnetic air prism, we have achieved a separation of ～10 arcsec between ～2 arcsec wide up and down-spin peaks of 5.4 Å neutrons. The polarised neutron option has thus been introduced into the SUSANS instrument. Strongly spindependent SUSANS spectra have been observed over ±1.3 × 10^?4 Å^?1 range for several magnetic alloy samples. Spatial pair-distribution functions for the up and down-spins as well as the nuclear and magnetic scattering length density distributions in the micrometer domain, have been deduced from these spectra.