Performances and limitations of the HRMS method for dioxins, furans and dioxin-like PCBs analysis in animal feedingstuffs: Part I: Results of an inter-laboratory study

The European strategy for dioxin monitoring of the food chain has defined high-resolution gas chromatography coupled to high-resolution mass spectrometry (HRGC/HRMS) method as the confirmatory method that can provide reliable and comparable results at sub-parts per trillion (ppt) level. This paper describes the first inter-laboratory study on dioxins, furans and dioxin-like PCBs by HRGC/HRMS method in animal feedingstuffs. Two different statistical approaches (ISO 5725 and Cofino’s statistics) were used for the statistical evaluation. For this particular study, the performances of the HRGC/HRMS method seem to be congener-independent in repeatability and reproducibility conditions over a concentration range covering more than four orders of magnitude. Results clearly show the effect of precision loss below 0.1 ppt level per congener in repeatability conditions and below 0.2 ppt level per congener in reproducibility conditions. LODs reported by the laboratories give median values of 0.02 ng/kg for most of the toxic congeners. Relative standard deviation between the laboratories’ mean values using upper-bound approach for TEQ calculation is 6.2%, more than twice the maximum level set at 0.75 ng TEQ/kg of product.     

Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

Synthesis of mesoionic[1,2,3]triazolo[5,1-d][1,2,5]triazepines

Intramolecular cyclization of 1-amino-3-phenacyl-4-carbohydrazido-1,2,3-triazolium-5-olates has been shown to take place via selective interaction of the carbonyl group with the terminal amino function of the hydrazido group to form a 1,2,5-triazepine ring. Minor products, resulting from the interaction of the α-nitrogen atom of the hydrazido group with the carbonyl function, having a N-amino-pyridazine structure were also detected and isolated. A general method for the synthesis of novel mesoionic 2-amino-7-aryl-4-oxo-2,4,5,8-tetrahydro[1,2,3]triazolo[5,1-d][1,2,5]triazepin-9-ium-3-olates was developed.     

Human immunoglobulin adsorption investigated by means of quartz crystal microbalance dissipation, atomic force microscopy, surface acoustic wave, and surface plasmon resonance techniques

Time-resolved adsorption behavior of a human immunoglobin G (hIgG) protein on a hydrophobized gold surface is investigated using multitechniques: quartz crystal microbalance/dissipation (QCM-D) technique; combined surface plasmon resonance (SPR) and Love mode surface acoustic wave (SAW) technique; combined QCM-D and atomic force microscopy (AFM) technique. The adsorbed hIgG forms interfacial structures varying in organization from a submonolayer to a multilayer. An "end-on" IgG orientation in the monolayer film, associated with the surface coverage results, does not corroborate with the effective protein thickness determined from SPR/SAW measurements. This inconsistence is interpreted by a deformation effect induced by conformation change. This conformation change is confirmed by QCM-D measurement. Combined SPR/SAW measurements suggest that the adsorbed protein barely contains water after extended contact with the hydrophobic surface. This limited interfacial hydration also contributed to a continuous conformation change in the adsorbed protein layer. The viscoelastic variation associated with interfacial conformation changes induces about 1.5 times overestimation of the mass uptake in the QCM-D measurements. The merit of combined multitechnique measurements is demonstrated.     

Elucidation of urinary metabolites of fluoxymesterone by liquid chromatography-tandem mass spectrometry and gas chromatography-mass spectrometry

The suitability of liquid chromatography tandem mass spectrometry (LC-MS/MS) and gas chromatography mass spectrometry (GC-MS) for the elucidation of fluoxymesterone metabolism has been evaluated. Electrospray ionization (ESI) and collision induced dissociation (CID) fragmentation in LC-MS/MS and electron impact spectra (EI) in GC-MS have been studied for fluoxymesterone and two commercially available metabolites. MS(n) experiments and accurate mass measurements performed by an ion-trap analyser and a QTOF instrument respectively have been used for the elucidation of the fragmentation pathway. The neutral loss scan of 20 Da (loss of HF) in LC-MS/MS has been applied for the selective detection of fluoxymesterone metabolites. In a positive fluoxymesterone doping control sample, 9 different analytes have been detected including the parent compound. Seven of these metabolites were also confirmed by GC-MS including 5 previously unreported metabolites. On the basis of the ionization, the CID fragmentation, the accurate mass of the product ions and the EI spectra of these analytes, a tentative elucidation as well as a proposal for the metabolic pathway of fluoxymesterone has been suggested. The presence of these compounds has also been confirmed by the analysis of five other positive fluoxymesterone urine samples.     

Recent applications in CEC

In this review, research papers on CEC are summarized that have been published between May 2005 and May 2007. Application-oriented research is discussed in which CEC is used in biochemical and pharmaceutical studies, in the analysis of food and natural products, and in industrial, environmental, and forensic analysis. Some trends and developments in separation science that may increase the applicability of the separation technique CEC are highlighted: 2-D separation systems and the application of nano- and microfluidic devices in separations.     

Computation of Electromagnetic Properties of Molecular Ensembles

We outline a methodology for efficiently computing the electromagnetic response of molecular ensembles. The methodology is based on the link that we establish between quantum-chemical simulations and the transfer matrix (T-matrix) approach, a common tool in physics and engineering. We exemplify and analyze the accuracy of the methodology by using the time-dependent Hartree-Fock theory simulation data of a single chiral molecule to compute the T-matrix of a cross-like arrangement of four copies of the molecule, and then computing the circular dichroism of the cross. The results are in very good agreement with full quantum-mechanical calculations on the cross. Importantly, the choice of computing circular dichroism is arbitrary: Any kind of electromagnetic response of an object can be computed from its T-matrix. We also show, by means of another example, how the methodology can be used to predict experimental measurements on a molecular material of macroscopic dimensions. This is possible because, once the T-matrices of the individual components of an ensemble are known, the electromagnetic response of the ensemble can be efficiently computed. This holds for arbitrary arrangements of a large number of molecules, as well as for periodic or aperiodic molecular arrays. We identify areas of research for further improving the accuracy of the method, as well as new fundamental and technological research avenues based on the use of the T-matrices of molecules and molecular ensembles for quantifying their degrees of symmetry breaking. We provide T-matrix-based formulas for computing traditional chiro-optical properties like (oriented) circular dichroism, and also for quantifying electromagnetic duality and electromagnetic chirality. The formulas are valid for light-matter interactions of arbitrarily-high multipolar orders.     

Density functional study of methyl chemisorption on polycyclic aromatic hydrocarbons.

The reactions of methyl radicals with large (up to C(96)H(24)) polycyclic aromatic hydrocarbons (PAHs) are studied by density functional calculations to shed light on the experimentally observed deposition of carbon on highly oriented pyrolytic graphite (HOPG), which occurs when hot HOPG (decorated by nanometre-sized defects) is exposed to methyl radicals. The equilibrium structures of the reaction products, together with transition structures for PAHs up to the size of phenanthroperylene, are determined using the density functionals B3LYP, TPSSh, BP86 and TPSS. The structures are analysed by computing the pi orbital axis vector (POAV) and the altitude of the reactive carbon above the molecular plane of the PAH. The strongest C-CH(3) bonds are found at the edges of the PAHs, where the s character of the C orbital involved in the bond is roughly 25 % (sp(3) hybrid orbital). Carbon atoms inside the PAH form bonds with the methyl radical through atomic orbitals with about 16 % s character in the POAV analysis. These bonds are much weaker than those at the edges of the PAH, while the reactive carbon has moved about 40 pm above the molecular plane. At the edges, the PAH carbon atoms do not leave the molecular plane to this extent. The computed barrier heights and geometrical parameters of the transition structures are in agreement with Hammond's postulate, and the relative energies of all of the equilibrium structures can be rationalized by Hückel molecular orbital (HMO) theory.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.