Chemiluminescence flow injection analysis of 1,3-dichloro-5,5-dimethylhydantoin in swimming pool water

A new chemiluminescence (CL) flow-injection method is proposed for the determination of 1,3-dichloro-5,5-dimethylhydantoin (DDH). The method is based on the chemiluminescent reaction of DDH and luminol-H(2)O(2) in an alkaline medium (pH 12.0-12.5). The concentration of the analyte shows a good linear relationship with the produced luminescence intensity in the range of 3.0x10(-8) to 8.0x10(-6) mol l(-1). The detection limit of the proposed method is 1.0x10(-8) mol l(-1) and the relative standard deviation (R.S.D.) is 4.7% (n=5) at 5.0x10(-7) mol l(-1). This method was successfully applied to the determination of trace amounts of this disinfectant in water samples obtained from five different swimming pools. Satisfying recovery values were also obtained.     

Chemiluminescent determination of vanadium in steel

Summary A chemiluminescent method for the determination of vanadium in steel with cinchomeronic hydrazide as analytical reagent is proposed. The optimum conditions are pH 11.75 (phosphate buffer), 1.0×10^–3 mol/l cinchomeronic hydrazide, 6.6×10^–3 mol/l hydrogen peroxide and 2.8×10^–3 mol/l V(IV). The maximum chemiluminescent emission is obtained at 420 nm. A linear relationship exists in the range of 0.04–1.00 g/ml of V(IV) with a 3.6% variation coefficient at 0.50 g/ml of V(IV) level for ten replicates. Cobalt(II), copper(II) and chromium(VI) show strong interference and a chloroform extraction procedure with -benzo-inoxime is recommended to avoid these interferences. This method has been applied to determine vanadium in a certified steel with excellent results.Presented at Euroanalysis VII     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

EXCITATION WAVELENGTH DEPENDENCE OF PROTOTROPIC DISSOCIATION AND TAUTOMERISM OF SALICYLAMIDE IN THE LOWEST EXCITED SINGLET STATE

Abstract—The fluorescence spectra of salicylamide in cyclohexane, ethanol and at different pH in water were studied. The short and long wavelength fluorescences observed in the organic solvents originate from emissions of a weakly or non-intramolecularly hydrogen bonded conformer and from phototautomerization of a strongly intramolecularly hydrogen bonded conformer, respectively. Evidence for at least 2 conformers in the ground state exists in the excitation wavelength dependence of the ratio of short wavelength to long wavelength emission. In water, prototropic dissociation of the phenolic group of salicylamide in the lowest excited singlet state also shows an excitation wavelength dependence, indicating that the weakly or non-intramolecularly hydrogen bonded conformer in water is predominately responsible for photodissociation.     

Cobalt-mediated approach for the synthesis of terpene-based hybrids

[structure: see text] Dicobalt-beta-pinene hybrids of types I and II have been prepared using a Nicholas reaction between propargyl derivatives, obtained from commercial (1R)-(-)-myrtenal, and different aromatic nucleophiles. The method is suitable for the preparation of densely functionalized bio-organometallic natural product-based hybrids, as demonstrated by the preparation of a beta-pinene-neoclerodane hybrid.     

Synthese von radioaktiv markierten Bromacetyl- und Diazoacetyl-α-melanotropin-Derivaten zum Studium von kovalenten Hormon-Makromolekül-Komplexen

Synthesis of radioactive α-melanotropin derivatives containing a bromoacetyl or diazoacetyl group for studies of covalent hormone-macromolecule complexes α-Melanotropin derivatives and fragments covalently bound to human serum albumin through their N-terminal end exhibit almost the same biological activity as the corresponding free N^α-acetylated peptides [6]. The preparation of such complexes requires derivatives with a ‘reactive’ N-terminal acetyl group. We describe here the synthesis of three α-melanotropin fragments and of two specifically tritiated α-melanotropin derivatives containing N^α-bromoacetyl or N^α-diazoacetyl groups: BrCH₂CO · Glu-His-Phe-Arg-Trp-Gly-Lys-Pro-Val · NH₂, BrCH₂CO · Glu-His-Phe-Arg-Trp-Gly · OH, BrCH₂CO · Trp-Gly-Lys-Pro-Val middot; NH₂, BrCH₂CO · D -Ala-Tyr(³H₂)-Gly-Nva-Glu-His-Phe-Arg-Trp-Gly-Lys-Pro-Val · NH₂, and N₂ = CHCO · Gly-Tyr(³H₂)-Ser-Nva-Glu-His-Phe-Arg-Trp-Gly- Lys-Pro-Val · NH₂. The latter two analogues displayed a specific radioactivity of about 20 and 36 Ci/mmol, and a biological activity of 2 · 10⁹ and 6 · 10⁹ U/mmol respectively. They are also being used for affinity and photoaffinity labelling of receptor molecules and antibody combining sites.     

Improvement of cyclosporin A determination in whole blood by reversed-phase high-performance liquid chromatography

A chromatographic method was developed for the determination of cyclosporin A in human whole blood using reversed-phase HPLC at room temperature. Most previous reports carried out this liquid chromatographic separation at temperatures above 70 degrees C. The present procedure greatly improves the detection limit by controlling peak broadening effects, as well as the lifetime of the column at room temperature. Under optimal conditions and using ketoconazole as an internal standard, the calibration graph was linear in the range of 16-1000 microg/L with a relative standard deviation of 3.72% at 150 microg/L and 2.45% at 300 microg/L (n = 11) of cyclosporin A. The detection limit was of 5.0 microg/L cyclosporin A. By this procedure, cyclosporin A pharmacokinetic parameters in healthy Chinese subjects were studied. The developed method could be applied to the quantification of cyclosporin A in human blood samples and allows the study of its pharmacokinetics in routine laboratories.     

Exact mass measurement of product ions for the structural confirmation and identification of unknown compounds using a quadrupole time-of-flight spectrometer: a simplified approach using combined tandem mass spectrometric functions

This article describes a simple method to perform lock mass corrected accurate mass measurements in tandem mass spectrometry (MS/MS) with a quadrupole time-of-flight (Q-TOF) mass spectrometer. The experimental approach consists of using the protonated molecule of a known compound, which is measured in a MS/MS function using low collision energy (no fragmentation), as mass calibrator. The unknown compound is acquired in MS/MS mode albeit using high collision energy. After the acquisition, the two MS/MS spectra of unknown and mass calibrator are combined, and the fragments of the unknown are lock mass corrected by using the protonated molecule of the mass calibrator. To prove this concept, 10 compounds were analyzed using this approach, the fragments interpreted and, where possible, related to structural data available in the literature. All the unequivocally assigned fragments were accurately mass measured with mass errors within appropriate limits, i.e. for m/z values <200 with a mass tolerance of 3 mDa while for m/z > 200 the mass tolerance is expressed as 10 ppm.     

Model prediction of batch emulsion copolymerization as a function of conversion: A sensitivity analysis

Recently a model has been developed capable of predicting absolute monomer concentrations and their ratios in the polymer, aqueous, and monomer droplet phases as a function of conversion in batch emulsion copolymerizations without using any adjustable parameters. In this article the sensitivity of model predictions of composition drift toward deviations of 10% in all model parameters (maximum swellabilities of monomer in the polymer phase, water solubilities, reactivity ratios, and monomer and polymer densities) was estimated using the monomer combination methyl methacrylate-styrene as an example. From the sensitivity analysis it can be concluded that the reactivity ratios are the most important parameters affecting composition drift. The effects of deviations in maximum swellabilities and monomer and polymer densities on composition drift can be neglected, while the water solubility is important only in those cases where the amount of monomer in the aqueous phase cannot be neglected as compared with the total monomer amount. © 1994 John Wiley & Sons, Inc.